B-28 APEMwww.apem.com
B
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - latching
Distinctive features and specifications
❑❑ Latching action
Actuator remains in the low position when “ON”.
❑❑ Illuminated or non-illuminated
❑❑ Compact
Behind-panel depth less than 20 mm (.787)
❑❑ Flat round actuator for optional marking
❑❑ Sealed to IP67
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing : IP67 according to IEC 60529
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule)
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
4A 12VDC, 200.000 cycles
1A 48VDC, 200.000 cycles
2A 48VDC, 100.000 cycles
3A 48VDC, 75.000 cycles
1A 72VDC, 15.000 cycles
• Initial contact resistance : 100 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.500 Vrms between terminals
1.000 VAC rms between terminals and frame
MATERIALS
• Case : thermoplastic, UL 94-V0
• Actuator : polyamide 6/6
• Bushing/bezel : zinc die-cast
(zamak), black painted
• Contacts : silver, gold plated
• Multi-wire lead AWG20,
section 0,6 mm2
• LED wire : AWG26, section 0,12 mm2
• Lens : polycarbonate
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Panel thickness : 1,5 mm (.059) min.
5,5 mm (.217) max.
• Total travel : 2,5 mm (.098) +/- 0,3 mm
• Typical operating force : 5 N +/- 2N
• Mechanical life : 200.000 cycles
• Torque : 1,5 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.
LED COMPONENT SPECIFICATIONS
LED colour
Forward current
Super red (L0S) 20mA
20mA
20mA
20mA
Typ. forward voltage Max. forward voltage
1,95V
2V
2,1V
3,2V
Yellow (L0Y)
Green (L0G)
Blue (L0B)
1,95V
2,05V
2,5V
4V
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
AGENCY APPROVAL
2A 125VAC/250VAC
File E83438
Availability : consult factory for
details of approved models.
Marking : to order switches marked
UL, complete appropriate box of
ordering format.
MOUNTING
Panel cut-out Matrix mounting
Back of panel space requirement
ECH1
18.10.01
CIPDTF1EP
Ø13.60
(.535DIA)
12.90
(.507)
(.531DIA)
ø13.50
1
1.50min-5.50Max
(.059 min-.216max)
20.00
(.787)
20.00
(.787)(.787)
20.00
CIPDTF1EA
DESSIN ECH 1
(.751)
19.10
17.10.01
➀ O-ring
APEM www.apem.com B-29
B
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - latching
Overview
IP
Actuator shapes
CSquare
RRound, curved
PRound, flat
Terminals
SSolder lug
FFlying leads
Z1 Quick-connect
PStraight PC
Electrical function
1OFF - ON
Actuator colours
1Blue
BDark blue
2Black
3Green
5Yellow
6Red
7/1 White
8Bright chrome
9Orange
Contacts
AD Silver, gold
plated
LED colours
Blank Non-illum.
L0S Super red
L0Y Yellow
L0G Green
L0B Blue
Options
100 Satin chrome
bezel
101 Bright chrome
bezel
104 High actuator
(non-illum. round
models only)
ABOUT THIS SERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
A sealing boot is available to protect the switches against frost and sand (P/N U5125).
It is presented after the IA series and in section H.
Mounting accessories : Standard hardware supplied : 1 hex nut 14 mm (.551) across flats and 1 O-Ring.
Packaging unit : 25 pieces
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
SERIES
Approval
UL
Consult factory for
detail of approved
models.
B-30 APEM www.apem.com
B
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - latching
Square or round - illuminated
MODEL
STRUCTURE
• Four LED colours
• Tin plated LED terminals
Square models
CIPDTF1CLU
ø12.00x0.75SI
ECH0.9
1.50 Min
(.059 Min)
(.472DIAx0.75IS)
(.322)
12.40
(.488)
8.20 7.00
(.275)
12.00
(.472SQ)
(.224)
5.70
17.50
(.688SQ)
17.10.01
EPOXY
16.00 Max
(.629 Max)
(19.68±.393)
500±10
➞Flat
Solder lug terminals
IPC1SAD OFF - ON
Flying lead terminals
IPC1FAD OFF - ON
Round models
CIPDTF1RLU
DESSIN ECH 0.9
1.50 Min
(.059 Min)
(.322)
12.40
(.488)
8.20 7.00
(.275)
ø12.00
(.472DIA)
(.224)
5.70
ø17.50
(.688DIA)
17.10.01
EPOXY
(.472DIAx0.75IS)
ø12.00x0.75SI
16.00 Max
(.629 Max)
(19.68±.393)
500±10
➞Flat
Solder lug terminals
IPR1SAD OFF - ON
Flying lead terminals
IPR1FAD OFF - ON
ACTUATOR COLOURS
1: blue - B: dark blue - 2: black - 3: green - 5: yellow
6: red - 7/1 : white - 8: bright chrome - 9: orange
LED COLOURS
OPTIONS
L0S : super red - L0Y : yellow - L0G : green - L0B : blue
100 : Satin chrome bezel
101 : Bright chrome bezel
Wire colours : black : contact, red : LED anode(+),
blue : LED cathode(-)
CIPDTF1SFCT
DESSIN ECH 0.9
22.10.01
OFF ON
CIPNLF1COS
17.10.01
(.090)
2.30
(.125)
3.20
(.110)
2.80
1.40
(.055)
DESSIN ECH 0.9
CISCOSZ-A
5-05-03
(.094)
2.40
(.330)
8.40
(.110)
2.80
1.20
(.047)
DESSIN ECH 0.9
Quick-connect Z1 Solder lug S
Straight P
Also available with straight PC : IPR1PAD or quick-connect terminals : IPR1Z1AD
Also available with straight PC : IPC1PAD or quick-connect terminals : IPC1Z1AD
APPROVAL
UL
Consult factory for details of approved models. To order
switches marked UL, complete above box with ”UL”.
APEM www.apem.com B-31
B
IP series
Pushbutton switches for harsh environments - bushing Ø 12 mm - latching
Square or round - non-illuminated
MODEL
STRUCTURE
Square models
CIPDTF1CNL
ø12.00x0.75SI
17.10.01
1.50 Min
(.059 Min)
(.472DIAx0.75IS)
(.322)
12.40
(.488)
8.20 7.00
(.275)
12.00
(.472SQ)
(.224)
5.70
17.50
(.688SQ)
DESSIN ECH 0.9
EPOXY
16.00 Max
(.629 Max)
(19.68±.393)
500±10
➞Flat
Solder lug terminals
IPC1SAD OFF - ON
Flying lead terminals
IPC1FAD OFF - ON
Round models
EPOXY
14.10
(.555)
(.688DIA)
Ø17.50
7.00
(.275)
(.472DIA)
Ø12.00
(.275)
7.008.20
(.488)
12.40
(.322)
(.472DIAx0.75IS)
(.059 Min)
1.50 Min
(19.68±.393)
500±10
Ø12.00x0.75SI
Ø12.00
(.472DIA)
2.00
(.078)
(.078)
2.00
➞Flat
CURVED ACTUATOR
Solder lug terminals
IPR1SAD OFF - ON
Flying lead terminals
IPR1FAD OFF - ON
FLAT ACTUATOR
Solder lug terminals
IPP1SAD OFF - ON
Flying lead terminals
IPP1FAD OFF - ON
ACTUATOR COLOURS
1: blue - B: dark blue - 2: black - 3: green - 5: yellow - 6: red - 7/1 : white - 8: bright chrome - 9: orange
OPTIONS
100 : Satin chrome bezel
101 : Bright chrome bezel
104 : High actuator (for round model only)
APPROVAL
UL
Availability : consult factory for details of approved
models.
Marking : to order switches marked UL, complete above
box with ”UL”.
Also available with straight PC : IPC1PAD or quick-connect terminals : IPC1Z1AD
Also available with straight PC : IP•1PAD or quick-connect terminals : IP•1Z1AD
104 IPR 104 IPP
Ø12.00
(.472DIA)
(.185)
4.70
Ø12.00
(.472DIA)
(.185)
4.70
Actuator marking available on IPP models (symbol 10 mm max.). On request.