ATTENUATORS - DIGITAL - SMT
1
HMC802ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
Functional Diagram
Electrical Specications, TA = +25° C, With Vdd = +5V & Vctl = 0/+5V
The HMC802ALP3E is ideal for both RF
and IF applications:
• Test Equipment and Sensors
• ISM, MMDS, WLAN, WiMAX, WiBro
• Microwave Radio & VSAT
• Cellular Infrastructure
± 0.6 dB Typical Step Error
Low Insertion Loss: 3 dB
High IP3: +55 dBm
Single Control Line
TTL/CMOS Compatible Control
Single +5V Supply
16 Lead 3x3mm SMT Package: 9m
The HMC802ALP3E is a broadband bidirectional 1-bit
GaAs IC digital attenuator in a low cost leadless sur-
face mount package. This single positive control line
digital attenuator utilizes off chip AC ground capac-
itors for near DC operation, making it suitable for a
wide variety of RF and IF applications. Covering DC
to 10 GHz, the insertion loss is less than 3 dB typical
and attenuation accuracy is excellent at ±0.6 dB typ-
ical. The attenuator also features a high IIP3 of +55
dBm. One TTL/CMOS control input is used to select
the attenuation state and a single Vdd bias of +5V is
required.
Parameter Frequency (GHz) Min. Typ. Max. Units
Insertion Loss
DC - 4 GHz
4 - 8 GHz
8 - 10 GHz
0.9
1.5
2.5
1.7
2.8
3.5
dB
dB
dB
Attenuation Range DC - 10 GHz 20 dB
Return Loss (RF1 & RF2, Both States) DC - 6 GHz
6 - 10 GHz
25
15
dB
dB
Attenuation Accuracy: (Referenced to Insertion Loss)1
DC - 6 GHz
6 - 8 GHz
8 - 10 GHz
-1.0
-2.0
-2.6
-0.6/+0.5
-1.6/+0.5
-2.3/+0.8
+0.6
+0.6
+1. 2
dB
dB
Input Power for 0.1 dB Compression DC - 10 GHz 27 dBm
Input Third Order Intercept Point
(Two-Tone Input Power= 14 dBm Each Tone) DC - 10 GHz 55 dBm
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
DC - 10 GHz 70
90
ns
ns
1. STEP SIZE IS 20DB FOR ALL FREQUENCY
Typical Applications Features
General Description
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ATTENUATORS - DIGITAL - SMT
2
HMC802ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Input Return Loss
Output Return Loss
Insertion Loss
Relative Attenuation
Bit Error vs. Frequency
Relative Phase vs. Frequency
-6
-5
-4
-3
-2
-1
0
024681012
+25 C +85 C -40 C
INSERTION LOSS (dB)
FREQUENCY (GHz)
-40
-30
-20
-10
0
024681012
INSERTION LOSS 20 dB
RETURN LOSS (dB)
FREQUENCY (GHz)
-40
-30
-20
-10
0
024681012
INSERTION LOSS 20 dB
RETURN LOSS (dB)
FREQUENCY (GHz)
-26
-24
-22
-20
-18
-16
-14
024681012
NORMALIZED ATTENUATION (dB)
FREQUENCY (GHz)
-2
-1.6
-1.2
-0.8
-0.4
0
0.4
0.8
1.2
1.6
2
024681012
BIT ERROR (dB)
FREQUENCY (GHz)
-60
-40
-20
0
20
40
60
024681012
RELATIVE PHASE (dB)
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ATTENUATORS - DIGITAL - SMT
3
HMC802ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Input IP3 vs. Frequency
Input IP3 vs. Frequency
(Low Frequency Detail)
Input Power for 1 dB Compression
Truth Table
Control Voltage
Bias Voltage & Current
Vdd = +5 Vdc ± 10%
Vdd
(Vdc)
Idd ( Typ.)
(mA)
4.5 0.32
5.0 0.33
5.5 0.34
State Bias Condition
Low 0 to +0.8V @ -1 µA Typ.
High +2 to +5V @ 30 µA Typ.
Note: Vdd = +5V
Control Voltage Input Attenuation State
RF1 - RF2
V1
High Reference Insertion Loss
Low 20 dB
20
30
40
50
60
70
024681012
INSERTION LOSS
20 dB
IP3 (dBm)
FREQUENCY (GHz)
20
30
40
50
60
70
0 0.1 0.2 0.3 0.4 0.5
INSERTION LOSS
20 dB
IP3 (dBm)
FREQUENCY (GHz)
Input Power for 0.1 dB Compression
(Low Frequency Detail)
0
5
10
15
20
25
30
35
40
0 0.1 0.2 0.3 0.4 0.5
P0.1dB INPUT POWER (dBm)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
0123456789101112
P0.1dB INPUT POWER (dBm)
FREQUENCY (GHz)
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ATTENUATORS - DIGITAL - SMT
4
HMC802ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Absolute Maximum Ratings
Outline Drawing
RF Input Power (DC - 10 GHz) +29.3 dBm
Control Voltage Range (V1) -1 to Vdd + 1V
Bias Voltage (Vdd) +7 Vdc
Channel Temperature 150 °C
Continuous Pdiss (T = 85 °C)
(derate 12 mW/°C above 85 °C) 0.84 W
Thermal Resistance
(channel to ground paddle) 77.4 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
ESD Sensitivity (HBM) Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]
HMC802ALP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL3 [1] H802A
XXXX
[1] Max peak reow temperature of 260 °C
[2] 4-Digit lot number XXXX
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PAT TERN.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ATTENUATORS - DIGITAL - SMT
5
HMC802ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1Vdd Supply Voltage.
2, 4, 9, 11 GND These pins and the exposed ground paddle
must be connected to RF/DC ground.
3, 10 RF1, RF2
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
Select value based on lowest frequency of operation.
5, 7, 8 ACG1, ACG2, ACG3
External capacitor to ground is required. Select value for
lowest frequency of operation. Place capacitor as close
to pins as possible.
6, 12, 13,
15, 16 N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
14 V1 See truth table and control voltage table.
Application Circuit
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
ATTENUATORS - DIGITAL - SMT
6
HMC802ALP3E
v01.0316
20 dB GaAs MMIC 1-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, DC - 10 GHz
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Analog Devices Inc. upon request.
List of Materials for Evaluation PCB EV1HMC802ALP3 [1]
Item Description
J1, J2 PCB Mount SMA Connector
J3, J4 DC Connector
C1 1000 pF Capacitor, 0603 Pkg.
C2, C3 100 pF Capacitor, 0402 Pkg.
C4 - C6 330 pF Capacitor, 0402 Pkg.
U1 HMC802ALP3E Digital Attenuator
PCB [2] 121213 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350