Datasheet for part number CA06EW20-2P-B-14 Our Catalog Part Number: CA06EW20-2P-B-14 Our Global Manufacturing Part Number: 121575-0760 Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 C (68 F) (Size 500/0) Contact Resistance (Size 500/0) Wire Cross Section Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 500/0) Gauge Coupling Torque Contact Retention (Size 500/0) Shell Material Shell Plating Insulator and Grommet Material Contact Material Connector with bayonet coupling Plug, straight Shielded connector with spring washer, endbell for shielded braids and heat shrinkable boots Pin 20 20-2 1 contact size 500 Metric Crimp Hard silver yes 245 A 0,2 m 50mm In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 M 2500 Vrms 2,8 mm Standard insulator material -55/+125C (-67/257F) IP67 acc. to DIN 40 050 and IP68 (1 bar pressure for 16h) 500 hours salt spray resistant 500 min 8,5 N For infos on Gauge please see catalog VG95234, part 1 Closing: 9 Nm max / Opening: 0,7 Nm min 95 N Aluminium alloy Olive drab chromate over cadmium plating (conductive) CR-Elastomere Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 500/0) General Info 13,7 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. Page 1 of 1