Datasheet for part number CA06EW20-2P-B-14
Our Catalog Part Number: CA06EW20-2P-B-14
Our Global Manufacturing Part Number: 121575-0760
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET
Product Datasheet
Bayonet Connector with bayonet coupling
Shell Style Plug, straight
Endbell Style Shielded connector with spring washer,
endbell for shielded braids and heat shrinkable boots
Gender Pin
Shell Size 20
Contact Arrangement 20-2
Number of contacts 1 contact size 500
Contact Type Metric Crimp
Contact Plating Hard silver
Shielding yes
Contact Rating at +20 °C (68 °F)
(Size 500/0) 245 A
Contact Resistance (Size 500/0) 0,2 mΩ
Wire Cross Section 50mm²
Operating Voltage
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Insulator Resistance
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Test Voltage 2500 Vrms
Air and Creepage Paths (Min) 2,8 mm
Ambient Temperature Standard insulator material -55°/+125°C
(-67/257°F)
Safety Provisions IP67 acc. to DIN 40 050 and IP68 (1 bar pressure for
16h)
Salt Spray Resistance 500 hours salt spray resistant
Mating Cycles 500 min
Sep. Force per Contact (Size 500/0) 8,5 N
Gauge For infos on Gauge please see catalog
VG95234, part 1
Coupling Torque Closing: 9 Nm max / Opening: 0,7 Nm min
Contact Retention (Size 500/0) 95 N
Shell Material Aluminium alloy
Shell Plating Olive drab chromate over cadmium plating
(conductive)
Insulator and Grommet Material CR-Elastomere
Contact Material Copper alloy
Harnessing Info: Contact Cross-Section See assembly instruction
Harnessing Info: Insulator Diameter See assembly instruction
Wire Stripping (Size 500/0) 13,7 mm
General Info
All tests in accordance with VG95319 and/or if
applicable with VG95210
Specifications and dimensions subject to change.
Page 1 of
1
