VHD6031035MP000050-108.000M - Pletronics, Inc.

to specifications per the terms of the Pletronics standard warranty. Production

processing does not necessarily include testing of all parameters.

VHD6 Series 3.3V

VCXO CMOS Oscillator

December 2008

• Pletronics’ VHD6 Series is a voltage controlled

crystal oscillator with a CMOS output.

• This model uses fundamental mode crystals

with no multiplication circuits.

• Tape and Reel or tube packaging is available.

• 10 to 108 MHZ

• 3.2 x 5 mm Ceramic LCC Package

• Voltage Control Function on pad 1

• Enable/ Disable Function on pad 2

Pletronics Inc. certifies this device is in accordance with the

RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.

Pletronics Inc. guarantees the device does not contain the following:

Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s

Weight of the Device: 0.09 grams

Moisture Sensitivity Level: 1 As defined in J-STD-020C

Second Level Interconnect code: e4

Absolute Maximum Ratings:

Parameter Unit

VCC Supply Voltage -0.5V to +5.5V

Vi Input Voltage -0.5V to VCC + 0.5V

Vo Output Voltage -0.5V to VCC + 0.5V

Thermal Characteristics

The maximum die or junction temperature is 155oC

The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane

and construction of the PCB.

VHD6 Series 3.3V

VCXO CMOS Oscillator

December 2008

www.pletronics.com 425-776-1880 2

Part Number:

VHD6031035 E G 500 100 -16.384M -XX

Internal code or blank

Nominal Frequency in MHZ

Pullability in ppm (Vcontrol)

050 = +_ 50 ppm minimum

100 = +_ 100 ppm minimum

Stability in ppm

000 = APR 500 = +_ 50 ppm

250 = +_ 25 ppm

Highest Specified Operating Temperature

A = +40oCF = +65oCL = +90oC

B = +45oCG = +70oCM = +95oC

C = +50oCH = +75oCN = +100oC

D = +55oCJ = +80oCP = +105oC

E = +60oCK = +85oC

Lowest Specified Operating Temperatu re

A = +10oCE = -10oCJ = -30oC

B = +5oCF = -15oCK = -35oC

C = +0oCG = -20oCL = -40oC

D = -5oCH = -25oCM = -45oC

Series (Part Type, Logic & Package)

Part Marking:

PLE VHD6

FF.FFFM

C YMDXX

Legend:

P or PLE = Pletronics

FF.FFFM = Frequency in MHZ

YMD = Date of Manufacture

xx = Internal factory codes

Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not

identified from the marking. External packaging labels and packing list will correctly identify the ordered

Pletronics part number.

Codes for Date Code YMD

Code 8 9 0 1 2 3 4

Year 2008 2009 2010 2011 2012 2013 2014

Code A B C D E F G H J K L M

Month JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

Code123456789ABC

Day123456789101112

Code D E F G H J K L M N P R

Day131415161718192021222324

Code T U V W X Y Z

Day25262728293031

VHD6 Series 3.3V

VCXO CMOS Oscillator

December 2008

www.pletronics.com 425-776-1880 3

Electrical Specification for 3.30V +_5% over the specified temperature range

Item Min Typ Max Unit Condition

Frequency Range 10 - 108 MHZ

Frequency Accuracy 1 +_25 - - ppm Not specified if APR is specified

Pullability 1+_90 - +_125 ppm For Vcontrol 1.65 V +_1.5 V.

Not specified if APR is specified

Defined by the part number

Pullability (APR) 1 +_50 - - ppm Absolute Pull Range, includes the effect of

temperature stability

Defined by the part number

Output Waveform CMOS

Output High Level 90 - - % of VCC for IOH= +7 mA

Output Low Level - - 10 % of VCC for IOL = -7 mA

Output TRISE and TFALL - 3.0 6.0 nS 10% to 90% of VCC, CLOAD = 15 pF

Output Symmetry 45 50 55 % at 50% point of VCC (See load circuit)

Vcontrol Resistance Pin 1 20 25 - Kohm

Modulation Bandwidth 10 20 - KHz Vcontrol = 1.65V +_1.65V, -3dB

Integrated Jitter - 0.4 0.6 pS 12 KHz to 20 MHZ

E/D Internal Pull-up 50 - - Kohm to VCC

V disable - - 15 % of VCC applied to pin 1

V enable 85 - - % of VCC applied to pin 1

Output leakage VOUT = VCC -10 - +10 uA Pin 1 low, device disabled

VOUT = 0V -10 - +10 uA

Enable time - - 250 nS Time for output to reach a logic state

Disable time - - 250 nS Time for output to reach a high Z state

Start up time - 1.5 10 mS Time for output to reach specified frequency

Supply Current - 5.0 8.0 mA CLOAD = 15 pF

Operating Temperature -45 +105 oC Defined by part number

Storage Temperature Range -55 + 125 oC

Specifications with Pad 2 E/D open circuit

1For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures.

VHD6 Series 3.3V

VCXO CMOS Oscillator

December 2008

www.pletronics.com 425-776-1880 4

Load Circuit and Test Waveform

Reliability: Environmental Compliance

Parameter Condition

Mechanical Shock MIL-STD-883 Method 2002, Condition B

Vibration MIL-STD-883 Method 2007, Condition A

Solderability MIL-STD-883 Method 2003

Thermal Shock MIL-STD-883 Method 1011, Condition A

ESD Rating

Model Minimum Voltage Conditions

Human Body Model 1500 MIL-STD-883 Method 3115

Charged Device Model 1000 JESD 22-C101

Package Labeling

Label is 1" x 2.6" (25.4mm x 66.7mm) Label is 1" x 2.6" (25.4mm x 66.7mm)

Font is Courier New Font is Arial

Bar code is 39-Full ASCII

(example actual PN will appear)

Trise

10% * Vcc

Ground

Vlow

50% * Vcc

90% * Vcc

Vhigh

Tfall

Symmetry

VHD6 Series 3.3V

VCXO CMOS Oscillator

December 2008

www.pletronics.com 425-776-1880 5

1

3 4

1

2

6

5

Mechanical:

Inches mm

A 0.197 +_0.006 5.00 +_0.15

B 0.125 +_0.006 3.20 +_0.15

C 0.053 max 1.35 max

D10.050 1.27

E10.050 1.27

F10.004 0.10

G10.039 1.00

H10.025 0.63

Contacts:

Gold 11.8 µinches 0.3 µm minimum over

Nickel 50 to 350 µinches 1.27 to 8.89 µm

1 Typical dimensions

Not to Scale

I10.020 0.50

J10.004R 0.10R

K10.008R 0.20R

Pad Function Note

1 Vcontrol Input

2 Output

Enable/ Disable When this pad is not connected, the oscillator shall operate

When this pad is logic low, the output will be inhibited (high impedance state)

Recommend connecting this pad to Vcc if the oscillator is to be always on

3 Ground (GND)

4 Output

5 N.C. No Internal connection, pad may be connected to ground or VCC

6 Supply Voltage

(VCC)Recommend connecting appropriate power supply bypass capacitors as close as

possible.

Layout and application information

For Optimum Jitter Performance, Pletronics recommends:

• a ground plane under the device

• no large transient signals (both current and voltage) should be routed under the device do not layout

near a large magnetic field such as a high frequency switching power supply

• do not place near piezoelectric buzzers or mechanical fans.

VHD6 Series 3.3V

VCXO CMOS Oscillator

December 2008

www.pletronics.com 425-776-1880 6

260°C M aximum

10 Seconds M aximum

215°C±10°C

Approxim a tely 50 Seconds

Allow ed rate of temperature change

Maximum 4°C per second

120 to 160 Seconds

100

150

200

250

Temperature (°C)

175°C±10°C

Reflow Cycle (typical for lead free processing)

The part may be reflowed 2 times without degradation.

Tape and Reel: available for quantities of 250 to 1000 per reel

Constant Dimensions Table 1

Tape

Size D0 D1

Min E1 P0 P2 S1

Min T

Max

T1

Max

8mm

1.5

+0.1

-0.0

1.0

1.75

+_0.1

4.0

+_0.1

2.0

+_0.05

0.6 0.6 0.1

12mm 1.5

16mm 1.5 2.0

+_0.1

24mm 1.5

Variable Dimensions Table 2

Tape

Size B1

Max E2 Min F P1 T2

Max W

Max Ao, Bo &

Ko

16 mm 12.1 14.25 7.5 +_0.1 8.0 +_0.1 8.0 16.3 Note 1

Note 1: Embossed cavity to conform to EIA-481-B Dimensions in mm Not to scale

REEL DIMENSIONS

A inches 7.0 10.0 13.0

mm 177.8 254.0 330.2

B inches 2.50 4.00 3.75

mm 63.5 101.6 95.3 Tape

Width

C mm 13.0 +0.5 / -0.2

D mm 16.4

+2.0

-0.0

16.4

+2.0

-0.0

16.4

+2.0

-0.0

16.0

Reel dimensions may vary from the above

VHD6 Series 3.3V

VCXO CMOS Oscillator

December 2008

www.pletronics.com 425-776-1880 7

IMPORTANT NOTICE

Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and

other changes to this product at anytime. PLE reserves the right to discontinue any product or service

without notice. Customers are responsible for obtaining the latest relevant information before placing orders

and should verify that such information is current and complete. All products are sold subject to PLE’s

terms and conditions of sale supplied at the time of order acknowledgment.

PLE warrants performance of this product to the specifications applicable at the time of sale in accordance

with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems

necessary to support this warranty. Except where mandated by specific contractual documents, testing of

all parameters of each product is not necessarily performed.

PLE assumes no liability for application assistance or customer product design. Customers are responsible

for their products and applications using PLE components. To minimize the risks associated with the

customer products and applications, customers should provide adequate design and operating safeguards.

PLE products are not designed, intended, authorized or warranted to be suitable for use in life support

applications, devices or systems or other critical applications that may involve potential risks of death,

personal injury or severe property or environmental damage. Inclusion of PLE products in such applications

is understood to be fully at the risk of the customer. Use of PLE products in such applications requires the

written approval of an appropriate PLE officer. Questions concerning potential risk applications should be

directed to PLE.

PLE does not warrant or represent that any license, either express or implied, is granted under any PLE

patent right, copyright, artwork or other intellectual property right relating to any combination, machine or

process which PLE product or services are used. Information published by PLE regarding third-party

products or services does not constitute a license from PLE to use such products or services or a warranty

or endorsement thereof. Use of such information may require a license from a third party under the patents

or other intellectual property of the third party, or a license from PLE under the patents or other intellectual

property of PLE.

Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without

alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction

of this information with alteration is an unfair and deceptive business practice. PLE is not responsible or

liable for such altered documents.

Resale of PLE products or services with statements different from or beyond the parameters stated by PLE

for that product or service voids all express and implied warranties for the associated PLE product or

service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.

Contacting Pletronics Inc.

Pletronics Inc. Tel: 425-776-1880

19013 36th Ave. West Fax: 425-776-2760

Lynnwood, WA 98036-5761 USA E-mail: ple-sales@pletronics.com

URL: www.pletronics.com