FORM AE043 ISS1 ASSEMtech Europe Ltd PRODUCT DATA SHEET Pin 0.7o 7.6 17.0 15.3o Drawings not to scale All dimensions in mm SPECIFICATION CONTACT FORM/STYLE SWITCHING VOLTAGE SWITCHING CURRENT SWITCHING CAPACITY (RESISTIVE) OPERATE ANGLE CONTACT RESISTANCE OPERATING TEMPERATURE STORAGE TEMPERATURE CASE MATERIAL FEATURES Max. Vac Max. A Max. VA Max. Deg Max. Deg. C Deg. C Closed 240 0.8 200 45 10 5 -37 +100 -40 +125 Steel-tin plated Special Purpose NOTE: When cutting or bending switch leads it is important that the glass seal is not damaged. The cutting or bending point should be no closer than 3mm to the glass to metal seal and the lead should be supported between the cutting or bending point and the glass to metal seal. PART NUMBER PRODUCT GROUP TSS112/1 TIP-OVER SWITCHES (Special Purpose and Heavy Duty) Rev. No. B Revision Note 1998 Catalogue Page 12 Date Signature 1-1-98 RG As part of the company policy of continued product improvement, specifications may change without notice. Our sales office will be pleased to help you with the latest information on this product range and details of our full design and manufacturing service. All products are supplied to our standard conditions of sale otherwise agreed in writing. (c)1996 Copyright Assemtech Europe Ltd. CM 1745-14 BS5750/ISO 9000 Reg. No. FM 21080