Rev. No.
B
Revision Note
1998 Catalogue Page 12
Date
1-1-98
Signature
RG
PRODUCT GROUP TSS112/1 PART NUMBER
SPECIFICATION
ASSEMtech Europe Ltd
PRODUCT DATA SHEET
CONTACT FORM/STYLE
SWITCHING VOLTAGE
SWITCHING CURRENT
SWITCHING CAPACITY (RESISTIVE)
OPERATE ANGLE
CONTACT RESISTANCE
OPERATING TEMPERATURE
STORAGE TEMPERATURE
CASE MATERIAL
FEATURES
Max. Vac
Max. A
Max. VA
Max. Deg˚
Max. Ω
Deg. ˚C
Deg. ˚C
Closed
240
0.8
200
45 ± 10
5
-37˚ +100˚
-40˚ +125˚
Steel-tin plated
Special Purpose
TIP-OVER SWITCHES
(Special Purpose and Heavy Duty)
CM 1745-14
Drawings not to scale
All dimensions in mm
FORM AE043 ISS1
As part of the company policy of continued product improvement, specifications may change without notice. Our sales
office will be pleased to help you with the latest information on this product range and details of our full design and
manufacturing service. All products are supplied to our standard conditions of sale otherwise agreed in writing.
©1996 Copyright Assemtech Europe Ltd.
BS5750/ISO 9000
Reg. No. FM 21080
17.0
15.3ø
Pin 0.7ø
7.6
NOTE: When cutting or bending switch leads it is important that the glass seal is not damaged. The cutting or bending point
should be no closer than 3mm to the glass to metal seal and the lead should be supported between the cutting or bending point
and the glass to metal seal.
