AMPLIMITE Subminiature D Connectors Right-Angle Posted Connectors Right-Angle Posted Connectors Connector Density Type Style and Shell Finish No. of Contact Positions Footprint HD-22 Plug and Receptacle Front Metal-Shell, Tin Plated (Pg. 52) 15 26 44 62 78 .350 [8.89] 9 15 25 37 50 Plugs and Receptacles Full Metal-Shell With and Without Grounding Indents, Tin Plated (Pgs. 71, 139, 155) Front Metal-Shell With Grounding Indents, Tin Plated (Pgs. 55-58, 60-63, 65-67, 131, 134, 138, 143, 150) HD-20 All-Plastic (Pgs. 68-70, 132, 133, 135, 136) 9 15 25 37 9 15 25 37 Mating Hardware Threaded Inserts Boardlocks Female Screwlocks .454 [11.53] Standard Screws .545 [13.84] Female Screwlocks .318 [8.08] .478 [12.14] .590 [14.99] Board Mounting Post Length .125 [3.18] Duplex (Gold Flash/Tin) .120 [3.05] Dia. Holes .120 [3.05] Dia. Holes Threaded Inserts Contact Plating (Mating Area/ Solder Tails) Duplex (0.000030 [0.00076] Gold/Tin) .125 [3.18] Dia. Holes Boardlocks Female Screwlocks .125 [3.18] Dia. Holes Duplex (.000030 [0.00076] Gold/Tin) .125 [3.18] Duplex (Gold Flash/Tin) .220 [5.59] Duplex (.000030 [0.00076] Gold/Tin) .125 [3.18] Duplex (Gold Flash/Tin) .318 [8.08] .120 [3.05] Dia. Holes .125 [3.18] Dia. Holes Duplex (.000030 [0.00076] Gold/Tin) .590 [14.99] Threaded Inserts .120 [3.05] Dia. Elliptical Holes Duplex (Gold Flash/Tin) Female Screwlocks Boardlocks .125 [3.18] 38 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors Right-Angle Posted Connectors (Continued) Product Facts: Flame retardant thermoplastic housing material, UL 94V-0 rated HD-20 right-angle connectors are available in 9, 15, 25 and 37 positions (Shell Sizes 1 thru 4) in both plug and receptacle versions; some versions available in 50 position, (Shell Size 5) HD-20 stacked connectors are available in 9/9, 15/15, 25/25, and 37/37 positions (Shell Sizes 1 thru 4) in receptacle over receptacle, plug over plug and combination versions HD-22 right-angle receptacle connectors are available in 15, 26, 44, 62 and 78 positions (Shell Sizes 1 thru 5) Low cost front metal-shell design compatible with full metal-shell connectors Integral boardlock versions secure posted connectors to pc boards prior to soldering HD-22 right-angle posted connectors are designed for high temperature applications Integral fixed 4-40 threaded inserts and screwlocks are available in both HD-20 and HD-22 connectors Connectors are intermateable with any size 20 or 22 subminiature D connectors dimensionally complying with MIL-C-24308 Section Contents HD-22 and HD-20 Contact Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 HD-22 and HD-20 Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Plug/Receptacle Mating and Panel Mounting Specifications . . . . . . . . . . . . . . . 42 AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-48 AMPLIMITE 2000 Subminiature D Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . 49, 50 HD-20 and HD-22 Slimline Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 HD-22 Right-Angle Posted Subminiature D Connectors . . . . . . . . . . . . . . . . 52, 53 HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54-57 HD-20 Full Metal-Shell Right-Angle Posted Connectors 454 Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58, 59 HD-20 Front Metal-Shell Right-Angle Posted Connectors 478 Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60, 61 HD-20 Full Metal-Shell Right-Angle Posted Connectors 545 Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62, 63 HD-20 Front Metal-Shell Right-Angle Posted Connectors 590 Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64, 65 HD-20 All-Plastic Right-Angle Posted Connectors 318 Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66-68 HD-20 All-Plastic Right-Angle Posted Connectors 590 Mount. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69-71 European Standard Footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Eurostyle Footprint. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Press Fit Termination, Right-Angle Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Subminiature D Connectors for Cable Mounting . . . . . . . . . . . . . . . . . . . . . . . . 75 Right-Angle Posted Connectors HD-20 and HD-22 connector contacts are available in plating types to satisfy different applications Right-Angle Stacked Connectors (Centerline-to-centerline height .750 [19.05]) Connector Density Type Style and Shell Finish No. of Contact Positions Front Metal-Shell, Tin Plated (Pgs. 144-149, 151) 9/9 15/15 25/25 37/37 (Std.) Footprint Mating Hardware Board Mounting Contact Plating (Mating Area/ Solder Tails) Post Length Duplex (.000030 [0.00076] Gold/Tin) (.000010 [0.00025] Gold/Tin) .125 [3.18] Receptacle over Receptacle Plug over Plug HD-20 Receptacle over Plug See Customer Drawings Threaded Inserts .120 [3.05] Dia. Holes Female Screwlocks Boardlocks Duplex (Gold Flash/Tin) Plug over Receptacle 39 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-22 and HD-20 Commercial Connectors (AMPLIMITE) Contact Arrangements HD-22 Inserts Shell Size 2 (26 Position) Right-Angle Posted Connectors Shell Size 1 (15 Position) Shell Size 3 (44 Position) Shell Size 4 (62 Position) Shell Size 5 (78 Position) HD-20 Inserts Shell Size 2 (15 Position) Shell Size 1 (9 Position) Shell Size 3 (25 Position) Shell Size 4 (37 Position) Shell Size 5 (50 Position) Note: Mating face of plug is shown, receptacle is mirror-image. 40 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-22 and HD-20 Connectors Performance Characteristics Cable Connectors Connector Type HDE-20 HDP-22 HDP-20 Electrical Characteristics 20 AWG [0.6mm2] 3 amperes 20 AWG [0.6mm2] 7.5 amperes 30 milliohms (max.) 15 milliohms (max.) 1000 VAC min. 1000 VAC min. 1000 VAC min. 5000 megohms min. 5000 megohms min. 5000 megohms min. N/A Contact Retention 3 lb. max. [13.34 N max.] 5 lb. min. [22.24 N min.] 7 lb. min. [31.14 N min.] 3 lb. max. [13.34 N max.] 10 lb. min. [44.48 N min.] Contact Mating Force (Per contact circuit pair) 8 oz. max. [2.22 N max.] 8 oz. max. [2.22 N max.] 8 oz. max. [2.22 N max.] Contact Unmating Force (Per contact circuit pair) .75 oz. min. [0.209 N min.] .75 oz. min. [0.209 N min. .75 oz. min. [0.209 N min.] Termination Resistance Dielectric Withstanding Voltage Insulation Resistance Right-Angle Posted Connectors 22 AWG [0.4mm2] Wire 5.0 amperes 15 milliohms (max.) Contact Current Rating (One pair of contacts) Mechanical Characteristics Contact Insertion Force .000030 [0.00076] gold--500 cycles Gold Flash-- 100 cycles 20 AWG--9.5 lb. [0.6mm2--42.3 N] 22 AWG--6 lb. [0.4mm2--26.7 N] 24 AWG--4 lb. [0.2mm2--17.79 N] 26 AWG--2.5 lb. [0.15mm2--11.12 N] 28 AWG--2.5 lb. [0.08mm2--11.12 N] 30 AWG--1 lb. [0.05mm2--4.45 N] .000030 [0.00076] gold--500 cycles Gold Flash-- 100 cycles Random 20 G's rms max. 50 G's Duration 11 ms Random 20 G's rms max. 50 G's Duration 11 ms 22 AWG--12 lb. [0.4mm2--53.4 N] 24 AWG--8 lb. [0.2mm2--35.6 N] 26 AWG--4.5 lb. [0.15mm2--20.02 N] 28 AWG--2.7 lb. [0.08mm2--12.01 N] Tensile Strength Durability 20 AWG--20 lb. [0.6mm2--89 N] 22 AWG--12 lb. [0.4mm2--53.4 N] 24 AWG--8 lb. [0.2mm2--35.6 N] 26 AWG--4.5 lb. [0.15mm2--20.02 N] 28 AWG--2.7 lb. [0.08mm2--12.01 N] .000030 [0.00076] gold--500 cycles Gold Flash-- 100 cycles Environmental Characteristics Vibration Physical Shock Random 20 G's rms max. 50 G's Duration 11 ms Board Mount Connectors Connector Type HD-20 Electrical Characteristics Connector Type HD-20 Mechanical Characteristics 18 AWG 6.0 amperes 24 AWG 4.3 amperes 28 AWG 2.9 amperes 15 milliohms* (max.) Single Contact Current Rating (30C Rise) Duration 11 ms Termination Resistance Dielectric Withstanding Voltage Insulation Resistance Durability Size 1000 VAC min.** 1 5000 megohms min. **Stacked Connectors--30 milliohms (max.) **Stacked Connectors--500 VAC min. Connector Mating and Unmating Force (lbs. max. over [N max.]) 2 3 4 5 .000030 [0.00076] gold--500 cycles Gold Flash--100 cycles HD-20 HD-20 Without With Grounding Grounding Indents Indents 4.5 30.0 [20.02] [133.5] 7.5 33.0 [33.4] [146.8] 12.5 37.0 [55.6] [164.6] 18.5 40.0 [82.3] [177.9] 25.0 44.0 [111.2] [195.7] 41 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors Plug/Receptacle Mating and Panel Mounting Specifications .265 .015 [6.730.381] for Shell Sizes 1 and 2 .256 .015 [6.500.381] for Shell Sizes 3, 4 and 5 Right-Angle Posted Connectors Plug/Receptacle Mating Plug (Typ.) The .265 [6.73] dimension is required to assure full mating of connector halves. This dimension must be taken into consideration when determining the method of mounting, panel thickness, etc. Receptacle (Typ.) Panel Mounting A .120 [3.050.050] Dia.** Dia.** Typ. (2 Pls.) .002 J* A 10 2 (2 Pls.) C .040 [1.02] Dia. Dia. Typ. (2 Holes) D E F .129 .002 [3.28 0.050] K Radius (4 Pls.) Cutout for Rear Mount and Short Latching Block B H* Note: Cutouts are for either plug or receptacle, front or rear panel mount. Shell Size (Pos.) Mounting Method Front/Rear Panel 1 (9) 2 (15) 3 (25) 4 (37) 5 (50) Front Rear Front Rear Front Rear Front Rear Front Rear Dimensions A B C D E F *H* *J* K .984 24.99 .984 24.99 1.312 33.33 1.312 33.33 1.852 47.04 1.852 47.04 2.500 63.50 2.500 63.50 2.406 61.11 2.406 61.11 .492 12.50 .492 12.50 .656 16.66 .656 16.66 .926 23.52 .926 23.52 1.250 31.75 1.250 31.75 1.203 30.56 1.203 30.56 .874 22.20 .806 20.47 1.202 30.53 1.134 28.80 1.743 44.27 1.674 42.52 2.391 60.73 2.326 59.08 2.297 58.34 2.218 56.34 .437 11.10 .403 10.24 .601 15.27 .567 14.40 .872 22.15 .837 21.26 1.196 30.38 1.163 29.54 1.149 29.19 1.109 28.17 .513 13.03 .449 11.41 .513 13.03 .449 11.41 .513 13.03 .449 11.41 .513 13.03 .449 11.41 .623 15.82 .555 14.10 .257 6.53 .225 5.72 .257 6.53 .225 5.72 .257 6.53 .225 5.72 .257 6.53 .225 5.72 .312 7.93 .278 7.06 -- -- .550 13.97 .750 19.05 .083 2.11 .132 3.35 .083 2.11 .132 3.35 .083 2.11 .132 3.35 .083 2.11 .132 3.35 .083 2.11 .132 3.35 -- -- .730 18.54 .750 19.05 -- -- 1.275 32.39 .750 19.05 -- -- 1.920 46.05 .750 16.13 -- -- 1.753 44.52 .750 19.05 Most plugs and receptacles can be mounted to a panel from either the front or rear, using a variety of accessory hardware. Posted receptacles are rear panel mounted only. Typical examples are shown below. Typical Front-Panel Mounted Subminiature D Plug **Panel cutout configuration with H and J dimensions provides clearance for mounting connectors with cable clamps. **This dimension is .190002 [4.830.05] when posted connectors with fixed female screwlocks are rear-panel mounted. Typical Rear-Panel Mounted Subminiature D Receptacle 42 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles Product Facts Stacked pcb connectors save board real estate Wide choice of configurations available Front Metal-Shells for EMI/RFI shielding Housings made of UL 94V-0 rated thermoplastic Plug connectors have builtin grounding indents Choice of 4-40 threaded insert or female screwlock mating hardware Hybrid styles provide maximum selectivity and permit mixing of signal speeds Packaged in plastic trays for ease of handling Recognized under the Component Program of the Underwriters Laboratories, Inc. File No. 28476 R Certified by Canadian Standards Association, File No. LR 7189 R See customer drawings for pcb layouts. AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors are members of the complete line of AMPLIMITE Subminiature D Connector family which has been accepted by the electronic industry for their rugged design and ease of application. Stacked connectors add the advantage of reducing overall board real estate normally consumed by individual pcb connectors. The versatility of the AMPLIMITE HD-20 line enables you to select the stacked connector best suited for your specific application. AMPLIMITE HD-20 Stacked Connectors, Series II offer a high degree of performance and a reduced cost. The line consists of: Receptacle over Receptacle in 9/9, 15/15, 25/25 and 37/37 contact positions Plug over Plug in 9/9, 15/15, 25/25 and 37/37 contact positions Receptacle over Plug in 9/9, 15/15, 25/25 and 37/37 contact positions Plug over Receptacle in a total of 9/9,15/15, 25/25 and 37/37 contact positions Configurations are available with a choice of mounting hardware--4-40 threaded inserts and female screwlocks. Hybrid and Mixed Styles AMPLIMITE Hybrid and Mixed Stacked Connectors combine a variety of subminiature D connector configurations into a single connector. This permits mixing signal speeds with a substantial reduction in pc board real estate. HD-20 Subminiature D Stacked PCB Connectors ture front metal-shells for EMI/RFI shielding, with housings made of UL 94V-0 approved material. The series offers gold plating in 30", 10" and gold flash on the mating end and tin plating on the termination end, with the entire contact nickel underplated. Due to the versatility of the AMPLIMITE Hybrid and Mixed lines of connectors any combination with an AMPLIMITE HD-20 Connector as the top connector, HD-22 High Density, and AMPLIMITE .050 Series as the bottom connector can be provided based on your application requirements. Contact Tyco Electronics for additional information. All AMPLIMITE Stacked and Mixed PCB Connectors fea- 43 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles (Continued) Material and Finish: HD-20 Subminiature D Stacked PCB Connectors Housing--94V-0 rated thermoplastic, black Shell--Steel, tin plated Contacts: Pins--Brass Sockets--Phosphor bronze Contact Plating: A--Gold flash on mating end, tin on solder tails with overall nickel plating underneath B--.000010 [0.00025] gold on mating end, tin on solder tails with overall nickel underplate C--.000030 [0.00076] gold on mating end, tin on solder tails with overall nickel underplate Boardlocks--Brass, tin plated Female Screwlocks--Brass, nickel plated Threaded Inserts--Brass, tin plated Brackets--Zinc .010 [ 0.25] E .010 [ 0.25] 1.244 .015 [31.60 0.38] 2 Plcs. .183 [4.64] Ref. .318 .010 [8.08 0.25] .125 .016 Typ. [3.18 0.41] Upper D-Sub Lower D-Sub 9p Plug 9p Plug 9p Rcpt. 9p Rcpt. 15p Plug 15p Plug / / / / / / 9p Plug 9p Rcpt. 9p Rcpt. 9p Plug 15p Plug 15p Rcpt. D 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.22 30.95 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 .228 .010 [5.80 0.25] 2 Plcs. 4-40 Screwlock See Table .010 [ 0.25] F Technical Documents: Product Specification 108-57517 See customer drawings for printed circuit board layouts. D Dimensions E .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 .984 24.99 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 F .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .380 .016 [9.65 0.41] Contact Finish Mounting Hardware Part Number A 4-40 inserts 4-40 inserts 4-40 inserts 4-40 fem s/l 4-40 fem s/l 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 fem s/l 4-40 fem s/l 4-40 fem s/l 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 1734279-1 B C A C A B C A B C A B C A B C A B C A B C 1734279-2 1734279-3 1734280-1 1734280-3 1734282-1 1734282-2 1734282-3 1734285-1 1734285-2 1734285-3 1734286-1 1734286-2 1734286-3 1734207-1 1734207-2 1734207-3 1-1734279-1 1-1734279-2 1-1734279-3 1-1734282-1 1-1734282-2 1-1734282-3 Continued on next page Note: All part numbers are RoHS compliant. 44 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles Upper D-Sub 15p Rcpt. 25p Plug 25p Plug 25p Rcpt. 25p Rcpt. 37p Plug 37p Plug / / / / / / / / 15p Rcpt. 15p Plug 25p Plug 25p Rcpt. 25p Rcpt. 25p Plug 37p Plug 37p Rcpt. D 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 1.55 39.30 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.09 53.10 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 Dimensions E 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 1.31 33.30 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 1.85 47.04 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 F .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 Contact Finish Mounting Hardware Part Number A 4-40 inserts 4-40 inserts 4-40 inserts 4-40 fem s/l 4-40 fem s/l 4-40 fem s/l 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 fem s/l 4-40 fem s/l 4-40 fem s/l 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 4-40 inserts 1-1734285-1 B C A B C A B C A B C A B C A B C A B C A B C A B C A B C 1-1734285-2 1-1734285-3 1-1734286-1 1-1734286-2 HD-20 Subminiature D Stacked PCB Connectors 15p Rcpt. Lower D-Sub 1-1734286-3 1-1734207-1 1-1734207-2 1-1734207-3 2-1734279-1 2-1734279-2 2-1734279-3 2-1734282-1 2-1734282-2 2-1734282-3 2-1734285-1 2-1734285-2 2-1734285-3 2-1734286-1 2-1734286-2 2-1734286-3 2-1734207-1 2-1734207-2 2-1734207-3 3-1734279-1 3-1734279-2 3-1734279-3 3-1734282-1 3-1734282-2 3-1734282-3 Continued on next page Note: All part numbers are RoHS compliant. 45 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles (Continued) Upper D-Sub HD-20 Subminiature D Stacked PCB Connectors 37p Rcpt. 37p Rcpt. Lower D-Sub / / 37p Rcpt. 37p Plug D 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 2.73 69.34 Dimensions E 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 2.500 63.50 F .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 .750 19.05 Contact Finish Mounting Hardware Part Number A 4-40 inserts 4-40 inserts 4-40 inserts 4-40 fem s/l 4-40 fem s/l 4-40 fem s/l 4-40 inserts 4-40 inserts 4-40 inserts 3-1734285-1 B C A B C A B C 3-1734285-2 3-1734285-3 3-1734286-1 3-1734286-2 3-1734286-3 3-1734207-1 3-1734207-2 3-1734207-3 Note: All part numbers are RoHS compliant. 46 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles HD-20 Front Metal Shell, Right-Angle AMPLIMITE Connectors Material and Finish: HD-20 Subminiature D Stacked PCB Connectors Housings and Pin Spacer--94V-0 rated thermoplastic, black Contacts: Sockets--Phosphor bronze or brass Contact Plating-- Gold flash on mating end, tin on termination end, with entire contact nickel underplated Shell--Steel, tin plated (1-1734870-1) Steel, nickel plated (1734870-1)) Boardlocks--Copper alloy, plated tin Bracket--Steel 9 Position HD-20 Receptacle over 15 Position HD-22 Receptacle Part No. 1734870-1 (without Female Screwlocks) Part No. 1-1734870-1 (as shown, with Female Screwlocks) Note: All part numbers are RoHS compliant. 47 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors AMPLIMITE HD-20 Subminiature D Stacked PCB Connectors Hybrid and Mixed Styles (Continued) HD-20 Front Metal Shell, Right-Angle Connectors Material and Finish: HD-20 Subminiature D Stacked PCB Connectors Housing--94V-0 rated PBT, see table Contacts--Phosphor bronze or brass HD22 Receptacle Contact Plating-- Gold flash on contact area, tin on solder tail area, all over nickel underplated Audio Jack--.000100 [.00254] min. tin over nickel underplate 15 Position HD-20 Receptacle over 3 Position Audio Plug Description With female screwlocks & color-coded audio1 With color-coded audio1 1 Part Number 1734287-2 1-1734287-2 PC 99 -- -- Color coded audio: Audio line in -- light blue Audio line out -- lime Microphone -- pink High-Rise Connectors S Material and Finish: Housing--94V-0 rated thermoplastic, burgundy Contacts--Phosphor bronze Contact Plating: A--.000010 [.000254] gold on mating area, tin on solder tails, all over nickel High-Rise 25 Position HD-20 Receptacle Dimension S .236 6.00 Plating Code Part Number PC 99 A -- 2-1734024-3 Note: All part numbers are RoHS compliant. 48 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors AMPLIMITE 2000 Subminiature D Connectors Product Facts Flame retardant housings, rated up to 105C Front metal-shell design Duplex plated gold flash or .000015 [0.00038] min. gold on mating end, tin on solder end, all over nickel underplate With boardlocks and 4-40 threads or female screwlocks Designed to Office Class II 9, 15 & 25 right-angle plugs and receptacles Recognized under the Component Program of the Underwriters Laboratories, Inc. File No. E28476 AMPLIMITE 2000 Subminiature Connectors R See customer drawings for circuit board layout. AMPLIMITE 2000 Subminiature D connectors represent the latest breakthrough in economical Subminiature D connector design. Presently available in the more popular sizes -- 9-, 15- and 25-receptacles and plugs with a .318 [8.08] printed circuit board footprint, the AMPLIMITE 2000 connector line features front metal-shell RFI/EMI protection, flame retardant housings with integral 4-40 threads, boardlocks, and duplex plated gold-overnickel contacts. 49 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors AMPLIMITE 2000 Subminiature Connectors (Continued) HD-20 Front Metal Shell Right-Angle Connectors #4-40 Insert See Table Material and Finish: Housing--94V-0 rated thermoplastic, black Shell--Steel, nickel plated Contacts: Pins--Brass Sockets--Phosphor bronze Contact Plating: A--Gold flash on mating end, tin on solder tails with overall nickel underplate B--.000015 [0.00038] gold on mating end, tin on solder tails with overall nickel underplate Boardlocks--Brass, tin plated Female Screwlocks--Brass, nickel plated Threaded Inserts--Brass, nickel plated AMPLIMITE 2000 Subminiature Connectors .236 .006 [6.0 0.15] L .125 .012 [3.2 0.30] .492 .010 [12.5 0.25] .318 .010 [8.08 0.25] Typical Plug Shell Size Contact Finish A B A B 9 15 Dimension L Ref. 1.210 30.80 1.540 39.20 W ith Female Screwlocks 1734351-1 1734351-2 -- -- W ith 4-40 Threaded Inserts 1734352-1 1734352-2 1734360-1 1734360-2 Technical Documents: Product Specification 108-57541 L .236 .006 [6.0 0.15] #4-40 Screwlock See Table .125 .012 [3.2 0.30] .492 .010 [12.5 0.25] .318 .010 [8.08 0.25] Typical Receptacle Shell Size 9 15 25 Contact Finish A B A B A B Dimension L Ref. 1.210 30.80 1.540 39.20 2.090 53.10 W ith Female Screwlocks 1734354-1 1734354-2 1734357-1 1734357-2 1734349-1 1734349-2 W ith 4-40 Threaded Inserts 1734348-1 1734348-2 1734355-1 1734355-2 1734350-1 1734350-2 Note: All part numbers are RoHS compliant. 50 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 and HD-22 Slimline Connectors 2 Rows of Soldertails Material and Finish: Housing--94V-0 rated thermoplastic, black Shell--Low carbon steel, nickel plated Contacts--Phosphor bronze or brass Contact Plating--Gold flash on mating area; .000100 [0.00254] min. tin on solder tail area; overall .000050 [0.00127] min. nickel underplate Boardlocks--Brass, tin plated over nickel underplate Threaded Inserts--Brass, nickel plated 9 Position Plug Part Number 1734340-1 HD-20 and HD-22 Slimline Connectors Technical Documents: Product Specification 108-57541 15 Position VESA Receptacle HD-22 Part Number 1734341-1 1 Row of Soldertails Material and Finish: Housing--94V-0 rated thermoplastic, black Shell--Low carbon steel, nickel plated Contacts--Brass Contact Plating--.000015 [0.00038] min. gold on mating area; .000100 [0.00254] min. tin on solder tail area; overall .000050 [0.00127] min. nickel underplate Boardlocks--Brass, tin plated over nickel underplate Threaded Inserts--Brass, nickel plated 15 Position VESA Receptacle HD-22 Part Number 1734335-1 Technical Documents: Product Specification 108-57541 Note: All part numbers are RoHS compliant. 51 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-22 Right-Angle Posted Subminiature D Connectors Right-Angle Subminiature D Connectors Product Facts Flame retardant thermoplastic housing material, UL94V-0 rated Low cost front metal shell design compatible with full metal-shell connectors Integral boardlock versions secure connectors to pc boards prior to soldering Contacts available in platings to satisfy different applications Integral threaded inserts and screwlocks available Recognized under the Component Program of Underwriters Laboratories, Inc., File No. E28476 HD-22 Front Metal Shell .350 [8.89] PCB Footprint R Receptacle Plug 52 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-22 Right-Angle Posted Subminiature D Connectors (Continued) Material and Finish: Housing--94V-0 rated thermoplastic, black VESA Std. 15-position Receptacle Housing Material--Thermoplastic 94V-O blue per VESA Std. Shell--Steel, nickel plated Contacts Pins--Brass Sockets--Phosphor bronze Contact Plating-- Gold flash, .000015 [0.00038] or .000030 [0.00076] on mating end, tin on solder tails with overall nickel underplate Boardlocks--Brass, tin plated Female Screwlocks--Brass, nickel plated Threaded Inserts--Brass, nickel plated .015 [ 0.38] B .010 [ 0.25] C .008 [ 0.20] .125 .020 [3.18 0.50] .492 .015 [12.50 0.38] 4-40 Insert See Table .350 .015 [8.89 0.38] .819 .015 [20.80 0.38] Right-Angle Plug No. of Contact Positions 15 26 44 Product Specification--108-1092 Application Specification-- 114-13198 62 78 A Dimensions B C 1.212 30.81 1.212 30.81 1.543 39.20 2.089 53.05 2.732 69.40 2.638 67.00 .984 24.99 .984 24.99 1.312 33.32 1.852 47.04 2.500 63.50 2.400 61.00 .582 14.80 .582 14.80 .583 14.81 .593 15.06 .593 15.06 .693 17.60 See customer drawings for printed circuit board layouts. Recognized under the Component Program of Underwriters Laboratories, Inc., File No. E28476 Mounting Hardware PCB Mounting Style Gold Flash Part Numbers 15" Gold 30" Gold 4-40 inserts 4-40 screw locks 4-40 inserts 4-40 inserts 4-40 inserts 4-40 screw locks board locks -- 5749767-2 5749767-1 board locks 5749768-3 5749768-2 5749768-1 board locks 5749769-3 5749769-2 5749769-1 board locks 5749771-3 5749771-2 5749771-1 board locks 5749639-3 5749639-2 5749639-1 board locks 5749234-3 5749234-2 -- A .015 [ 0.38] B .010 [ 0.25] C Right-Angle Subminiature D Connectors Technical Documents: A .008 [ 0.20] .125 .020 [3.18 0.50] .492 .015 [12.50 0.38] R .350 .015 [8.89 0.38] Boardlock 2 Plcs. .866 .015 [22.00 0.38] Right-Angle Receptacle No. of Contact Positions 15 15 VESA 26 44 62 78 Dimensions A B C 1.212 30.81 1.212 30.81 1.212 30.81 1.212 30.80 1.543 39.20 1.543 39.20 2.089 53.05 2.089 53.05 2.732 69.40 2.732 69.40 2.638 67.00 2.638 67.00 .984 25.00 .984 25.00 .984 25.00 .984 25.00 1.311 44.32 1.311 44.32 1.852 47.04 1.852 47.04 2.500 63.50 2.500 63.50 2.400 61.00 2.400 61.00 .630 16.00 .630 16.00 .630 16.00 .630 16.00 .593 15.06 .593 15.06 .583 14.81 .583 14.81 .583 14.81 .583 14.81 .693 17.60 .693 17.60 Mounting Hardware 4-40 inserts 4-40 screw locks 4-40 inserts 4-40 screw locks 4-40 inserts 4-40 screw locks 4-40 inserts 4-40 screw locks 4-40 inserts 4-40 screw locks 4-40 inserts 4-40 screw locks PCB Mounting Style board locks Part Numbers 15" Gold Gold Flash 30" Gold 1-1734530-1 1-1734530-2 1-1734530-3 board locks 1734530-1 1734530-2 board locks 1734344-1 -- board locks 1-1734344-1 board locks 2-5748481-3 2-5748481-2 5748481-5 board locks 2-5748481-5 2-5748481-4 5748481-6 board locks 2-5748482-4 2-5748482-3 5748482-5 board locks -- 1734530-3 . 2-1734344-3 Pending -- Obs. . 2-5748482-5 Pending -- Obs. -- . board locks 2-5748394-4 2-5748394-3 5748394-5 board locks 2-5748394-6 2-5748394-5 5748394-6 board locks 2-5748483-1 2-5748483-0 5748483-5 board locks -- . 2-5748483-2 5748483-6 Note: All part numbers are RoHS compliant. 53 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount Post Size--.026 [0.66] Dia. Plug .015 A [ 0.381] .010 B [ 0.254] See Table .494.015 [12.550.38] Typ. With Grounding Indents and Grounding Straps .026 [0.66] Dia. Contact Typ. .375.010 [9.520.25] Typ. With Threaded Insert Grounding Indent Typ. Mating Face .125.015 [3.180.15] Typ. D .015 .318.015 [8.080.38] Typ. E [ 0.381] See Table .318 [8.08] Board Mount Footprint With Fixed Female Screwlock Material and Finish: Technical Documents: Front Shell--Steel, tin plated Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlocks--Copper alloy, tin plated Pin Contacts (Posted)--Brass, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Product Specification--108-40025 Application Specification-- 114-40010 See customer drawings for printed circuit board layouts. Recognized under the Component Program of Underwriters Laboratories, Inc., File No. E28476 R Certified by Canadian Standards Association, File No. LR 7189 R Plug Part Numbers Shell Size No. of Contact Positions A B D E 1 9 1.213 30.81 .984 24.99 .235 5.97 .733 18.62 2 15 1.541 39.14 1.312 33.33 .235 5.97 .733 18.62 3 25 2.088 53.04 1.852 47.04 .230 5.84 .738 18.75 4 37 2.729 69.32 2.500 63.50 .230 5.84 .740 18.80 Dimensions Contact Finish (Plating Code) A B A B A B A B Without Boardlocks With Standard Mounting Holes 5747250-2 -- 5747236-2 -- 5747238-2 5747238-2 -- -- With Threaded Inserts With Fixed Female Screwlocks 5747250-4 5747250-3 5747236-4 5747236-4 5747238-4 5747238-3 5747252-4 -- 5747250-6 -- 5747236-6 -- 5747238-6 -- -- -- With Boardlocks With Standard Mounting Holes 5747840-2 -- 5747841-2 -- 5747842-2 -- 5747843-2 -- With Threaded Inserts With Fixed Female Screwlocks 5747840-4 5747840-3 5747841-4 5747841-3 5747842-4 5747842-3 5747843-4 5747843-3 5747840-6 5747840-5 5747841-6 -- 5747842-6 5747842-5 5747843-6 -- Notes: 1. All plug connectors are preloaded with size 20 DF posted pin contacts. 2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093 [2.36] max. for all others. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 54 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount (Continued) Post Size--.026 [0.66] Dia. Receptacle .015 A [ 0.381] .010 B [ 0.254] .494.015 [12.550.38] With Grounding Straps See Table .026 [0.66] Dia. Typ. .125.015 [3.180.38] Typ. Mating Face With Threaded Insert .243 [6.17] .740.015 [18.800.38] Typ. .375.010 [9.530.25] .318.015 [8.080.38] Typ. With Fixed Female Screwlock See Table Technical Documents: Front Shell--Steel, tin plated Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlocks--Copper alloy, tin plated Socket Contacts (Posted)-- Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Product Specification--108-40025 Application Specification-- 114-40010 Shell Size No. of Contact Positions 1 Dimensions A B 9 1.213 30.81 .984 24.99 2 15 1.541 39.14 1.312 33.33 3 25 2.088 53.04 1.852 47.04 4 37 2.729 69.32 2.500 63.50 Contact Finish (Plating Code) .318 [8.08] Board Mount Footprint Material and Finish: Receptacle Part Numbers With Boardlocks With With Fixed With With Fixed Standard Female Threaded Female Mounting Screwlocks Inserts Screwlocks Holes Without Boardlocks A B A B A B With Standard Mounting Holes 5745781-2 -- 5745782-2 -- 5745783-2 -- 5745781-4 5745781-3 5745782-4 -- 5745783-4 5745783-3 5745781-6 -- 5745782-6 -- 5745783-6 5745783-5 5747844-2 -- -- -- 5747846-2 -- 5747844-4 5747844-3 5747845-4 5747845-3 5747846-4 5747846-3 5747844-6 5747844-5 5747845-6 5747845-5 5747846-6 5747846-5 A 5745784-2 5745784-4 5745784-6 -- 5747847-4 5747847-6 With Threaded Inserts Notes: 1. All receptacle connectors are preloaded with size 20 DF posted socket contacts. 2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093 [2.36] max. for all others. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 55 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount (Continued) Post Size--.026 [0.66] Dia. Plug .015 A [ 0.381] .010 B [ 0.254] See Table .494.015 [12.550.38] Typ. With Grounding Indents and Grounding Straps With Threaded Insert .026 [0.66] Dia. Contact Typ. .375.010 [9.520.25] Typ. Grounding Indent Typ. Mating Face .125.015 [3.180.15] Typ. D .318.015 [8.080.38] Typ. .015 E [ 0.381] See Table .318 [8.08] Board Mount Footprint With Fixed Female Screwlock Material and Finish: Front Shell--Steel, tin plated Housing--94V-0 rated thermoplastic, compatible with standard wave, vapor phase, and infra-red reflow (SMT) soldering, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlocks--Copper alloy, tin plated Pin Contacts (Posted)--Brass, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Shell Size No. of Contact Positions 1 9 1.213 30.81 .984 24.99 .235 5.97 .733 18.62 3 25 2.088 53.04 1.852 47.04 .230 5.84 .738 18.75 A Dimensions B D E Contact Finish (Plating Code) A B A B Plug Part Numbers With Boardlocks With With Fixed Threaded Female Inserts Screwlocks 5788792-1 5788793-1 5788792-2 5788793-2 5788794-1 5788795-1 5788794-2 -- Notes: 1. All plug connectors are preloaded with size 20 DF posted pin contacts. 2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093 [2.36] max. for all others. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Technical Documents: Product Specification--108-40025 Application Specification-- 114-40010 Note: All part numbers are RoHS compliant. 56 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 318 Mount (Continued) Post Size--.026 [0.66] Dia. Receptacle .015 A [ 0.381] .010 B [ 0.254] .494.015 [12.550.38] With Grounding Straps See Table .026 [0.66] Dia. Typ. .125.015 [3.180.38] Typ. Mating Face With Threaded Insert .243 [6.17] .740.015 [18.800.38] Typ. .375.010 [9.530.25] .318.015 [8.080.38] Typ. With Fixed Female Screwlock See Table Front Shell--Steel, tin plated Housing--94V-0 rated thermoplastic, compatible with standard wave, vapor phase, and infra-red reflow (SMT) soldering, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlocks--Copper alloy, tin plated Socket Contacts (Posted)-- Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Contact Finish (Plating Code) Shell Size No. of Contact Positions 1 9 1.213 30.81 .984 24.99 2 15 1.541 39.14 1.312 33.33 3 25 2.088 53.04 1.852 47.04 A B A B A B 4 37 2.729 69.32 2.500 63.50 A Dimensions A B .318 [8.08] Board Mount Footprint Material and Finish: Receptacle Part Numbers Without Boardlocks With Boardlocks With Fixed With With Fixed Female Threaded Female Screwlocks Inserts Screwlocks 5788803-1 5788796-1 5788797-1 -- 5788796-2 5788797-2 -- 5788798-1 5788799-1 -- 5788798-1 -- -- 5788800-1 5788801-1 -- 5788800-2 5788801-2 -- 5788802-1 -- Notes: 1. All receptacle connectors are preloaded with size 20 DF posted socket contacts. 2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093 [2.36] max. for all others. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Technical Documents: Product Specification--108-40025 Application Specification-- 114-40010 Note: All part numbers are RoHS compliant. 57 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Right-Angle Posted Connectors 454 Mount Post Size--.025 [0.64] Sq. Receptacle .015 A [ 0.381] .010 B [ 0.254] .112 [2.84] .494.015 [12.550.38] Material and Finish: Shell--Steel, tin plated Insert--94V-0 rated thermoplastic, black Contacts (Posted): Pin--Brass Socket--Phosphor bronze Contact Plating: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated .025 Sq. Post [0.64] Typ. .109.010 Typ. [2.770.25] .274.015 [6.960.38] .243 [6.17] Mating Face .269.010 [6.830.25] .015 D [ 0.381] .454.015 [11.530.38] .510.010 [12.950.25] .120 Dia. [3.05] Typ. Technical Documents: .120 Dia. [3.05] Typ. E +.030 [0.762] -0.15 [0.381] .454 [11.53] Board Mount Footprint Product Specification--108-40025 Application Specification-- 114-40013 See customer drawings for printed circuit board layouts. Shell Size No. of Contact Positions A 9 1.213 30.81 .984 24.99 .915 23.24 1.541 39.14 1.312 33.33 915 23.24 2.088 53.04 1.852 47.04 .919 23.34 2.729 69.32 2.500 63.50 .919 23.34 1 2 3 4 15 25 37 Dimensions B D E .125 3.18 .220 5.59 .125 3.18 .220 5.59 .125 3.18 .220 5.59 .125 3.18 .220 5.59 Contact Finish (Plating Code) A B 5745438-4 5745438-3 B 5745438-1 A 5745439-4 A 5745439-2 A 5745440-4 B 5745440-1 A 5745441-4 B -- Part Number Notes: 1. All connectors are preloaded with size 20 DF posted contacts; plugs with pin contacts and receptacles with 3. socket contacts. 2. .125 [3.18] post length is recommended for pc board thickness of .093 [2.36] max.; .220 [5.59] post length is recommended for pc board thickness of .125 [3.18] max. Note: All part numbers are RoHS compliant. 58 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Right-Angle Posted Connectors 454 Mount (Continued) Post Size--.025 [0.64] Sq. Plug .015 A [ 0.381] .010 B [ 0.254] .112 [2.84] Without Grounding Indents .494.015 [12.550.38] .025 Sq. Post [0.64] Typ. .109.010 Typ. [2.770.25] .274.015 [6.960.38] Grounding Indents With Grounding Indents Grounding Indents Mating Face C .269.010 [6.830.25] Material and Finish: Technical Documents: Product Specification--108-40025 Application Specification-- 114-40013 .015 .454.015 [11.530.38] .510.010 [12.950.25] D [ 0.381] .120 Dia. [3.05] Typ. .120 Dia. [3.05] Typ. Shell Size No. of Contact Positions 1 9 2 3 4 15 25 37 A B Dimensions C 1.213 30.81 .984 24.99 .235 5.97 .915 23.24 1.541 39.14 1.312 33.33 .235 5.97 .915 23.24 2.088 53.04 1.852 47.04 .230 5.84 .919 23.34 2.729 69.32 2.500 63.50 .230 5.84 .919 23.34 D E +.030 [0.762] -.015 [0.381] .125 3.18 A B Part Numbers With Grounding Indents 5745434-8 -- .220 5.59 .125 3.18 .220 5.59 .125 3.18 .220 5.59 .125 3.18 .220 5.59 B -- A 5745435-8 A -- A -- B 5745436-3 A 5745437-8 B 5745437-3 E Contact Finish (Plating Code) .454 [11.53] Board Mount Footprint Shell--Steel, tin plated Insert--94V-0 rated thermoplastic, black Contacts (Posted): Pin--Brass Socket--Phosphor bronze Contact Plating: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Notes: 1. All connectors are preloaded with size 20 DF posted contacts; plugs with pin contacts and receptacles with 3. socket contacts. 2. .125 [3.18] post length is recommended for pc board thickness of .093 [2.36] max.; .220 [5.59] post length is recommended for pc board thickness of .125 [3.18] max. Note: All part numbers are RoHS compliant. 59 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 478 Mount Post Size--.026 [0.66] Dia. Plug .015 A [ 0.381] .010 B [ 0.254] See Table .494.0.15 [12.550.381] Typ. With Grounding Indents and Grounding Straps See Table .026 [0.66] Dia. Contact Typ. With Threaded Insert .125..015 [3.180.38] Typ. Grounding Indent Typ. Mating Face D With Fixed Female Screwlock .889..015 [22.580.38] .534.0.10 [13.560.25] Typ. .478..015 [12.140.38] Typ. Material and Finish: .478 [12.14] Board Mount Footprint Front Shell--Steel, tin plated Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlocks--Copper alloy, tin plated Pin Contacts (Posted)--Brass, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Shell Size No. of Contact Positions 1 9 3 25 A Dimensions B D 1.213 30.81 2.088 53.04 .984 24.99 1.852 47.04 .235 5.97 .230 5.84 Technical Documents: Product Specification--108-40025 Application Specification-- 114-40010 See customer drawings for printed circuit board layouts. Contact Finish (Plating Code) Plug Part Number With Boardlocks With With Fixed Threaded Female Inserts Screwlocks A 5747848-4 -- A -- 5747850-6 Notes: 1. All plug connectors are preloaded with size 20 DF posted pin contacts. 2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093 [2.36] max. for all others. Notes: 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 60 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 478 Mount (Continued) Post Size--.026 [0.66] Dia. Receptacle .015 A [ 0.381] .010 B [ 0.254] With Grounding Straps .494.015 [12.550.38] See Table .026 [0.66] Dia. Typ. With Threaded Insert Mating Face .243 [6.17] .478.015 [12.140.38] Typ. .534.010 [13.560.25] Typ. .902.015 [22.920.38] Typ. With Fixed Female Screwlock Material and Finish: .125.015 [3.180.38] Typ. See Table Technical Documents: Product Specification--108-40025 Application Specification-- 114-40010 Shell Size No. of Contact Positions 1 9 Notes: 1. 2. 2. 3. Dimensions A B 1.213 30.81 .984 24.99 Contact Finish (Plating Code) A .478 [12.14] Board Mount Footprint Front Shell--Steel, tin plated Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlocks--Copper alloy, tin plated Socket Contacts (Posted)-- Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Receptacle Part Numbers Without Boardlocks With Boardlocks With With Threaded Threaded Inserts Inserts 5747418-4 5747852-4 All receptacle connectors are preloaded with size 20 DF posted socket contacts. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093 [2.36] max. for all others. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 61 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Right-Angle Posted Connectors 545 Mount Post Size--.025 [0.64] Sq. Plug .015 A [ 0.381] .010 B [ 0.254] .015 C [ 0.381] Without Grounding Indents .025 [6.35] Sq. Post Typ. Grounding Indents See Table Mating Face D With Grounding Indents .600.010 [15.240.25] Typ. .120 [3.05] Dia. Typ. .015 .545.015 [13.840.38] (Mount) E [ 0.381] .120 [3.05] Dia. Typ. With 4-40 Female Screwlocks .125 +.030 -.015 [3.18 +0.76 -0.38 ] With Standard Mounting Screws Material and Finish: .545 [13.84] Board Mount Footprint Shell--Steel, tin plated Insert--94V-0 rated thermoplastic, black Female Screwlock--Steel, zinc plated Pin Contacts (Posted)--Brass, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated D .545.015 [13.840.38] (Mount) .015 E [ 0.381] .125 +.030 -.015 [3.18 +0.76 -0.38 ] With 4-40 Female Screwlocks Technical Documents: Product Specification--108-40025 Application Specification-- 114-40013 See customer drawings for printed circuit board layouts. Shell No. of Size Contact Pos. Dimensions A B C D E Contact Finish (Plating Code) Plug Part Numbers Without Grounding With Grounding Indents Indents With Standard With Standard With Female Mounting Screws* Mounting Screws Screwlocks 1 9 1.213 .984 .494 .235 1.025 30.81 24.99 12.55 5.99 26.04 A 5745351-2 5745351-4 5747197-4 2 15 1.541 1.312 .494 .235 1.025 39.14 33.33 12.55 5.99 26.04 A B -- 5745352-1 5745352-4 -- -- -- 3 25 A -- -- 5747022-2 4 37 A -- 5745354-4 -- 5 50 2.088 53.04 2.729 69.32 2.635 66.93 A -- 5745355-4 5747497-4 1.852 .494 .230 1.029 47.04 12.55 5.84 26.14 2.500 .494 .230 1.029 63.50 12.55 5.84 26.14 2.406 .605 .230 1.149 61.11 15.37 5.84 29.19 *These plugs can be made available with female screwlocks, consult Tyco Electronics. Notes: 1. All plugs are preloaded with size 20 DF posted pin contacts. 2. Recommended pc board thickness is .093 [2.36] max. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 62 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Full Metal-Shell Right-Angle Posted Connectors 545 Mount (Continued) Post Size--.025 [0.64] Sq. Receptacle .015 A [ 0.381] .010 B [ 0.254] .015 C [ 0.381] .025 [6.35] Sq. Post Typ. Mating Face .243 [6.17] With 4-40 Female Screwlocks .600.010 [15.240.25] Typ. Material and Finish: .120 [3.05] Dia. Typ. Technical Documents: Product Specification--108-40025 Application Specification-- 114-40013 .120 [3.05] Dia. Typ. Shell Size No. of Contact Positions A B C E Contact Finish (Plating Code) 1 9 1.213 30.81 .984 24.99 .494 12.55 1.033 26.24 2 15 3 25 4 37 1.541 39.14 2.088 53.04 2.729 69.32 1.312 33.33 1.852 47.04 2.500 63.50 .494 12.55 .494 12.55 .494 12.55 5 50 Dimensions 2.635 66.93 2.406 61.11 .605 15.37 .125 +.030 -.015 [3.18 +0.76 -0.38 ] .545 [13.84] Board Mount Footprint Shell--Steel, tin plated Insert--94V-0 rated thermoplastic, black Female Screwlock--Steel, zinc plated Socket Contacts (Posted)-- Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated .545.015 [13.840.38] (Mount) Receptacle Part Numbers A B With Standard Mounting Screws 5745112-2 -- With Female Screwlocks 5747020-2 5747020-1 1.033 26.24 1.033 26.24 1.033 26.24 A 5745113-2 5747021-2 A 5745114-2 5745536-2 A 5745115-2 -- 1.153 29.29 A B 5745116-2 5745116-1 5747193-2 5747193-1 Notes: 1. All receptacles are preloaded with size 20 DF posted socket contacts. 2. Recommended pc board thickness is .093 [2.36] max. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 63 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 590 Mount Post Size--.026 [0.66] Dia. Plug .015 A [ 0.381] .010 B [ 0.254] See Table .494.015 [12.550.38] Typ. With Grounding Indents and Grounding Straps .026 [0.66] Dia. Contact Typ. Mating Face Grounding Indent Typ. D With Threaded Insert .315.010 [8.000.25] Typ. .590.015 [14.990.38] Typ. .015 E [ 0.381] See Table .125.015 [3.180.38] Typ. .590 [14.99] Board Mount Footprint With Fixed Female Screwlock Material and Finish: Technical Documents: Front Shell--Steel, tin plated Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlocks--Copper alloy, tin plated Pin Contacts (Posted)--Brass, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Product Specification--108-40025 Application Specification-- 114-40010 Contact Finish (Plating Code) Plug Part Numbers Without Boardlocks With Boardlocks With With With Fixed Threaded Threaded Female Inserts Inserts Screwlocks 5745990-4 5747832-4 5747832-6 5745990-3 5747832-3 -- Shell Size No. of Contact Positions A 1 9 1.213 30.81 .984 24.99 .235 5.97 .965 24.51 A B 2 15 5747833-6 A 5745994-4 5747834-4 5747834-6 37 .965 24.51 .970 24.64 .972 24.69 5747833-4 4 .235 5.97 .230 5.84 .230 5.84 -- 25 1.312 33.33 1.852 47.04 2.500 63.50 A 3 1.541 39.14 2.088 53.04 2.729 69.32 A -- 5747835-4 5747835-6 Dimensions B D E Notes: 1. All plug connectors are preloaded with size 20 DF posted pin contacts. 2. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093 [2.36] max. for all others. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 64 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 Front Metal-Shell Right-Angle Posted Connectors 590 Mount (Continued) Post Size--.026 [0.66] Dia. Receptacle .015 A [ 0.381] .010 B [ 0.254] .494.015 [12.550.38] See Table .026 [0.66] Dia. Typ. With Grounding Straps With Threaded Insert Mating Face .243 [6.17] .315.010 [8.000.25] .590.015 [14.990.38] .975.015 [24.770.38] With Fixed Female Screwlock See Table Material and Finish: .125.015 [3.180.38] Shell Size No. of Contact Positions 1 9 2 15 Dimensions A B Technical Documents: Product Specification--108-40025 Application Specification-- 114-40010 1.213 30.81 1.541 39.14 Contact Finish (Plating Code) A 5745988-4 A 3 25 2.088 53.04 1.852 47.04 4 37 2.729 69.32 2.500 63.50 A Notes: 1. 2. 2. 3. Receptacle Part Numbers Without Boardlocks With Boardlocks With With Fixed With With Fixed Threaded Female Threaded Female Inserts Screwlocks Inserts Screwlocks .984 24.99 1.312 33.33 A B .590 [14.99] Board Mount Footprint Front Shell--Steel, tin plated Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlocks--Copper alloy, tin plated Socket Contacts (Posted)-- Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated 5745988-6 5747836-4 5747836-6 5745984-4 -- 5747837-4 -- -- 5745992-3 5745992-6 -- 5747838-4 5747838-3 5747838-6 -- 5745996-4 -- 5747839-4 -- All receptacle connectors are preloaded with size 20 DF posted socket contacts. Recommended pc board thickness is .062 [1.58] for connectors with boardlocks and .093 [2.36] max. for all others. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 65 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 318 Mount Receptacle--With Boardlocks With Threaded Insert .500.015 [12.700.38] Typ. With Threaded Insert .243 [6.17] .015 A [0.381] .010 .473.015 [12.010.38] B [0.254] See Table .452.015 [11.480.38] .395.010 [10.030.25] With Fixed Female Screwlock Material and Finish: Mating Face Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlock--Copper alloy, tin plated Socket Contacts (Posted)-- Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated .318 [8.08] Board Mount Footprint .125.020 [3.180.51] Typ. Boardlock 2 Plc. .375.015 [9.520.381] Typ. Position 1 Technical Documents: Product Specification--108-1226 Application Specification-- 114-40027 See customer drawings for printed circuit board layouts. Shell Size No. of Contact Positions 1 9 3 25 Dimensions A B 1.222 31.04 2.090 53.09 .984 24.99 1.852 47.04 Contact Finish (Plating Code) Part Numbers With With Fixed Threaded Female Inserts Screwlocks A -- 5748979-1 A 5748901-1 5748981-1 Consult Tyco Electronics for availability. Notes: 1. All receptacle connectors are preloaded with size 20 DF posted socket contacts. 2. Recommended pc board thickness is .062 [1.58]. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 66 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 318 Mount (Continued) Plug .500.015 [12.700.38] Typ. .473.015 [12.010.38] .015 With Threaded Insert A [ 0.381] .010 B [ 0.254] #4-40 Threaded Insert, 2 Plc. .236 [5.99] Material and Finish: Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Boardlock--Copper alloy, tin plated Pin Contacts (Posted)--Copper alloy, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--.000010 [0.00025] min. gold on mating end, tin on termination end, with entire contact nickel underplated .452.015 [11.480.38] .395.010 [10.030.25] .125.020 [3.180.51] Boardlock 2 Plc. See Table Mating Face .375.015 [9.5210.38] Typ. Position 1 Technical Documents: Product Specification--108-1226 Application Specification-- 114-40027 See customer drawings for printed circuit board layouts. No. of Contact Positions 2 15 3 25 Dimensions A B 1.550 39.37 2.090 53.09 1.312 33.32 1.852 47.04 Contact Finish (Plating Code) .318 [8.08] Board Mount Footprint Shell Size Part Numbers With Threaded Inserts With Without Boardlocks Boardlocks A 5748904-1 -- B -- 5748865-3 Consult Tyco Electronics for availability. Notes: 1. All plug connectors are preloaded with size 20 DF posted pin contacts. 2. Recommended pc board thickness is .062 [1.58]. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 67 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 318 Mount (Continued) Post Size--.026 [0.66] Dia. Receptacle--Without Boardlocks .015 .010 A [0.381] B [0.254] #4-40 Threaded Insert 2 Plc. .452.015 [11.480.38] With Standard Mounting Holes .026 [0.66] Dia. Post Typ. With Threaded Insert Mating Face .243 [6.17] .375 [9.530.381] Typ. 0.15 With Fixed Female Screwlock .062 [1.58] R Typ. .125 [ 3.18 Material and Finish: Housing--94V-0 rated thermoplastic, black Threaded Inserts--Zinc, chromate coated Female Screwlocks--Zinc, chromate coated Socket Contacts (Posted)-- Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated .318 [8.08] Board Mount Footprint .740.015 [18.800.38] .318.015 [8.070.38] Shell Size No. of Contact Positions 1 9 1.213 30.81 .984 24.99 Technical Documents: 2 15 Product Specification--108-40025 Application Specification-- 114-40015 1.541 39.14 1.312 33.32 3 25 2.088 53.04 1.852 47.04 See customer drawings for printed circuit board layouts. Dimensions A B +.020 -.015 +0.76 -0.51 ] Part Numbers Contact Finish (Plating Code) With Threaded Inserts With Fixed Female Screwlocks A B A B A B 5745394-2 -- -- -- 5745392-2 -- 5745395-2 -- 5745396-2 -- 5745397-2 -- With .125 [3.18] Mounting Holes -- 5745131-1 5745396-2 -- 5745132-2 -- Notes: 1. All receptacle connectors are preloaded with size 20 DF posted socket contacts. 2. Recommended pc board thickness is .093 [2.36]. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 68 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 590 Mount Receptacle--With Boardlocks .440.015 [11.180.38] Typ. .243 [6.17] .015 .010 A [0.381] B [0.254] See Table .745.015 [18.920.38] With Threaded Insert .452.015 [11.480.38] .395.010 [10.030.25] .125.020 [3.180.51] Typ. Boardlock 2 Plc. With Fixed Female Screwlock Material and Finish: Housing--94V-0 rated thermoplastic, black Eyelets--Brass, tin plated Threaded Inserts--Zinc Female Screwlock--Zinc Boardlock--Copper alloy, tin plated Socket Contacts (Posted)-- Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated Technical Documents: See customer drawings for printed circuit board layouts. .315.015 [8.000.381] Typ. Position 1 Shell Size No. of Contact Positions 1 9 3 25 Dimensions A B 1.213 30.81 2.088 53.04 .984 24.99 1.852 47.04 Contact Finish (Plating Code) Part Numbers With With Fixed Threaded Female Inserts Screwlocks B 5748907-2 -- A 5748909-1 5748989-1 .590 [14.99] Board Mount Footprint Product Specification--108-1226 Application Specification-- 114-40027 Mating Face Notes: 1. All receptacle connectors are preloaded with size 20 DF posted socket contacts. 2. Recommended pc board thickness is .062 [1.58]. 3. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Note: All part numbers are RoHS compliant. 69 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 590 Mount (Continued) Post Size--.026 [0.66] Dia. Receptacle--Without Boardlocks .015 A [0.381] .010 B [0.254] .452.015 [11.480.38] See Table .026 [0.66] Dia. Post Typ. With Threaded Insert Mating Face .243 [6.17] With Female Screwlock .530 [13.46] Typ. .125 [3.18] Dia. 2 Holes Material and Finish: Housing--94V-0 rated thermoplastic, black Threaded Inserts--Zinc, chromate coated Female Screwlocks--Zinc, chromate coated Socket Contacts (Posted)--Phosphor bronze, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated .590 [14.99] Board Mount Footprint ] Part Numbers 5747459-4 5747459-3 5747460-4 5747460-3 5747461-4 5747461-3 5747459-6 5747459-5 5748948-1 5747460-5 5747461-6 5747461-5 2.500 63.50 A 5747462-4 5747462-6 5747462-2 2.406 61.11 A B -- -- -- -- 5206973-1 5206973-2 1.213 30.81 .984 24.99 Product Specification--108-40025 Application Specification-- 114-40015 2 15 1.541 39.14 1.312 33.32 3 25 2.088 53.04 1.852 47.04 See customer drawings for printed circuit board layouts. 4 37 2.729 69.32 Notes: 1. 2. 3. 4. +0.76 -0.51 A B A B A B 9 Dimensions A B 2.635 66.93 [3.18 With Fixed Female Screwlocks 1 50 +.020 -.015 With Threaded Inserts No. of Contact Positions 5 .125 Contact Finish (Plating Code) Shell Size Technical Documents: .972.015 [24.690.38] See note 4 .590.015 [14.990.38] With .125 [3.18] Mounting Holes 5747459-2 5747459-1 5747460-2 5747460-1 5747461-2 5747461-1 All receptacle connectors are preloaded with size 20 DF posted socket contacts. Recommended pc board thickness is .093 [2.36] max. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Dimension is 1.120 [28.45] for size 5 d-subs. Note: All part numbers are RoHS compliant. 70 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors HD-20 All-Plastic Right-Angle Posted Connectors 590 Mount (Continued) Post Size--.026 [0.66] Dia. Plug--Without Boardlocks .015 .010 A [0.381] B [0.254] .452.015 [11.480.38] See Table .026 [0.66] Dia. Post Typ. With Threaded Insert Mating Face .230.006 [5.840.15] With Female Screwlocks .530.015 [13.460.381] .125 [3.18] Dia. 2 Holes Material and Finish: Housing--94V-0 rated thermoplastic, black Threaded Inserts--Zinc, chromate coated Female Screwlocks--Zinc, chromate coated Pin Contacts (Posted)--Brass, duplex plated as follows: A--.000030 [0.00076] gold on mating end, tin on termination end, with entire contact nickel underplated B--Gold flash on mating end, tin on termination end, with entire contact nickel underplated .968.015 [24.590.38] See note 4 .590.015 [14.990.38] .125 +.020 -.015 [3.18 +0.76 -0.51 ] Part Numbers With Threaded Inserts With Fixed Female Screwlocks .984 24.99 A B 5747467-4 -- -- -- With .125 [3.18] Mounting Holes 5747467-2 5747467-1 1.541 39.14 1.312 33.32 A 5748872-1 5748952-1 5747468-2 25 2.090 53.09 1.852 47.04 A B 5748873-1 -- 5748953-1 -- 5748826-1 5748826-2 4 37 2.729 69.32 2.500 63.50 A -- -- 5747470-2 5 50 2.635 66.93 2.406 61.11 A B -- -- -- -- 5206971-1 5206971-2 No. of Contact Positions Technical Documents: 1 9 Product Specification--108-40025 Application Specification-- 114-40015 1.213 30.81 2 15 3 See customer drawings for printed circuit board layouts. Notes: 1. 2. 3. 4. Dimensions A B .590 [14.99] Board Mount Footprint Contact Finish (Plating Code) Shell Size All plug connectors are preloaded with size 20 DF posted pin contacts. Recommended pc board thickness is .093 [2.36] max. Male screw retainers are used as mating hardware for connectors with 4-40 female screwlocks. Dimension is 1.115 [28.32] for size 5 d-subs, GPL244. Note: All part numbers are RoHS compliant. 71 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors Right-Angle Mounting Connectors -- European Standard Footprint See customer drawings for latest dimensional details Material and Finish: Plug with Boardlocks -- Solder Termination Front Shell--Steel, tin plated Housing--Black glass-filled polyester Flammability--UL 94V-0 Contact Material-- Pin--Phosphor bronze Socket--Phosphor bronze Contact Area Plating--0.76m Gold Current Rating--6A max. Insulation Resistance-- 5000 M min. Dielectric Strength--1000V AC min. Temperature Rating-- -55C to +105C No of Contact Positions 9 15 25 37 3mm Hole 4-40 Inserts 4-40 Screwlocks M3 Inserts M3 Screwlocks 338168-2 338169-2 338170-2 338171-2 1-338168-2 1-338169-2 1-338170-2 1-338171-2 3-338168-2 3-338169-2 3-338170-2 3-338171-2 2-338168-2 2-338169-2 2-338170-2 2-338171-2 4-338168-2 4-338169-2 4-338170-2 4-338171-2 Socket with Boardlocks -- Solder Termination No of Contact Positions 9 15 25 37 3mm Hole 4-40 Inserts 4-40 Screwlocks M3 Inserts M3 Screwlocks 106505-2 106506-2 106507-2 106508-2 1-106505-2 1-106506-2 1-106507-2 1-106508-2 3-106505-2 3-106506-2 3-106507-2 3-106508-2 2-106505-2 2-106506-2 2-106507-2 2-106508-2 4-106505-2 4-106506-2 4-106507-2 4-106508-2 Plug without Boardlocks -- Solder Termination No of Contact Positions 9 15 25 37 3mm Hole 4-40 Inserts 4-40 Screwlocks M3 Inserts M3 Screwlocks 5-338168-2 5-338169-2 5-338170-2 5-338171-2 6-338168-2 6-338169-2 6-338170-2 6-338171-2 8-338168-2 8-338169-2 8-338170-2 8-338171-2 7-338168-2 7-338169-2 7-338170-2 7-338171-2 9-338168-2 9-338169-2 9-338170-2 9-338171-2 Socket without Boardlocks -- Solder Termination 3mm Hole 4-40 Inserts 4-40 Screwlocks M3 Inserts M3 Screwlocks 5-106505-2 5-106506-2 5-106507-2 5-106508-2 6-106505-2 6-106506-2 6-106507-2 6-106508-2 8-106505-2 8-106506-2 8-106507-2 8-106508-2 7-106505-2 7-106506-2 7-106507-2 7-106508-2 9-106505-2 9-106506-2 9-106507-2 9-106508-2 Right-Angle Mounting Connectors No of Contact Positions 9 15 25 37 Note: All part numbers are RoHS compliant. 72 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors Right-Angle Mounting Connectors -- Eurostyle Footprint See customer drawings for latest dimensional details Material and Finish: Plug with Boardlocks -- Solder Termination Front Shell--Steel, tin plated Housing--Grey thermoplastic PBTP Flammability--UL 94V-0 Contact Material-- Pin--Copper alloy Socket--Copper alloy Contact Area Plating--Nickel/Gold (>250 mating cycles) Current Rating--2.2A Insulation Resistance-- 5000 M min. Dielectric Strength--1000V AC Temperature Rating-- -55C to +125C No of Contact Positions 9 15 25 37 3mm Hole 4-40 Inserts 4-40 Screwlocks M3 Inserts M3 Screwlocks 5-1393480-9 6-1393480-0 On Enquiry On Enquiry 8-1393480-5 8-1393480-6 8-1393480-7 8-1393480-8 1393481-5 3-1392010-3 1393481-6 3-1392010-4 7-1393480-4 7-1393480-5 7-1393480-6 7-1393480-7 9-1393480-4 9-1393480-5 9-1393480-6 On Enquiry Socket with Boardlocks -- Solder Termination No of Contact Positions 9 15 25 37 3mm Hole 4-40 Inserts 4-40 Screwlocks M3 Inserts M3 Screwlocks 5-1393480-5 5-1393480-6 5-1393480-7 On Enquiry 8-1393480-1 8-1393480-2 8-1393480-3 8-1393480-4 9-1393480-9 1393481-1 1393481-2 3-1392010-7 6-1393480-7 6-1393480-8 6-1393480-9 7-1393480-0 9-1393480-0 9-1393480-1 9-1393480-2 On Enquiry Plug without Boardlocks -- Solder Termination No of Contact Positions 9 15 25 37 3mm Hole 4-40 Inserts 4-40 Screwlocks M3 Inserts M3 Screwlocks 2-1393480-1 2-1393480-2 2-1393480-3 2-1393480-4 4-1393480-0 4-1393480-1 4-1393480-2 4-1393480-3 5-1393480-2 5-1393480-3 5-1393480-4 3-1392010-5 3-1393480-2 3-1393480-3 2-1392010-8 3-1392010-6 On Enquiry On Enquiry On Enquiry On Enquiry Socket without Boardlocks -- Solder Termination No of Contact Positions 9 15 25 37 3mm Hole 4-40 Inserts 4-40 Screwlocks M3 Inserts M3 Screwlocks 1-1393480-7 1-1393480-8 1-1393480-9 2-1393480-0 3-1393480-6 3-1393480-7 3-1393480-8 3-1393480-9 4-1393480-7 4-1393480-8 4-1393480-9 5-1393480-0 2-1393480-8 2-1393480-9 3-1393480-0 3-1392010-8 On Enquiry On Enquiry On Enquiry On Enquiry Right-Angle Mounting Connectors Note: All part numbers are RoHS compliant. 73 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 AMPLIMITE Subminiature D Connectors Standard Density Press Fit Termination, Right-Angle Mounting Press Fit Termination, Right-Angle Mounting -- European Standard Footprint Material and Finish: Plug with Boardlocks -- Press Fit Termination Front Shell--Steel, tin plated Housing--Black thermoplastic PBTP/PPS Flammability--UL 94V-0 Contact Material-- Pin--Copper alloy Socket--Copper alloy Contact Area Plating--Nickel/Gold (>250 mating cycles) Current Rating--2.2A Insulation Resistance-- 5000 M min. Dielectric Strength--1000V AC Temperature Rating-- -55C to +125C No of Ways 9 15 25 37 3mm Hole -- -- -- -- 4-40 Inserts 3-1393481-2 3-1393481-3 3-1393481-4 2-1392010-7 4-40 Screwlocks 3-1393481-8 3-1393481-9 2-1393497-7 4-1393481-0 M3 Inserts 2-1393481-5 2-1393481-6 2-1393481-7 2-1393481-8 M3 Screwlocks On Enquiry On Enquiry On Enquiry On Enquiry 4-40 Screwlocks 3-1393481-6 2-1393497-4 2-1393497-5 2-1393497-6 M3 Inserts 2-1393481-1 2-1393481-2 2-1393481-3 2-1393481-4 M3 Screwlocks On Enquiry On Enquiry On Enquiry On Enquiry 4-40 Screwlocks 3-1393482-0 3-1393482-2 3-1393482-4 3-1393482-5 M3 Inserts 1-1393482-4 3-1393497-0 1-1393482-5 3-1393497-1 M3 Screwlocks 2-1393482-1 4-1483489-2 On Enquiry On Enquiry 4-40 Screwlocks 2-1393482-2 2-1393482-4 2-1393482-6 2-1393482-8 M3 Inserts 1-1393482-2 1-1393482-3 9-1393487-2 2-1393497-9 M3 Screwlocks 2-1393482-0 On Enquiry On Enquiry On Enquiry Socket with Boardlocks -- Press Fit Termination No of Ways 9 15 25 37 3mm Hole -- -- -- -- 4-40 Inserts 2-1393481-9 3-1393481-0 3-1393481-1 2-1392010-6 Press Fit Termination, Right-Angle Mounting -- Eurostyle Footprint Material and Finish: Plug with Boardlocks -- Press Fit Termination Front Shell--Steel, tin plated Housing--Black thermoplastic PBTP/PPS Flammability--UL 94V-0 Contact Material-- Pin--Copper alloy Socket--Copper alloy Contact Area Plating--Nickel/Gold (>250 mating cycles) Current Rating--2.2A Insulation Resistance-- 5000 M min. Dielectric Strength--1000V AC Temperature Rating-- -55C to +125C No of Ways 9 15 25 37 3mm Hole -- -- -- -- 4-40 Inserts On Enquiry On Enquiry On Enquiry On Enquiry Socket with Boardlocks -- Press Fit Termination No of Ways 9 15 25 37 3mm Hole -- -- -- -- 4-40 Inserts 1-1393482-6 1-1393482-8 3-1392010-9 4-1392010-0 Note: All part numbers are RoHS compliant. 74 Catalog 82068 Revised 1-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208