THE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY TO BEL FUSE INC, AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. TURNS RATIO TP1 TP2 TP3 TP4 OCL @ 100kHz2/100mMVRMS 8mA DC BIAS INS, LOSS O.AMHz TO 1MHz IMHz TO 65MHz 695MHz TO 100MHz 1OOMHz TO 1235MHz RET, LOSS <MIND 0.SMHz-40MHZ2 40MHz-100MHz CM TO CM REJ 100kHz - 100MHz CM TO DM REJ 100kHz 100MHz HIPOT (Isolation Voltage: ELECTRICAL CHARACTERISTICS @ 25C SCHEMATIC TRDI- 1 1CT + 1CT ~ 1CT + 1CT 42% het L d 1CT + 1CT +2% .ae 1CT + 1CT 42% | 0 Aa, 3 g l 1CT + 1CT +2% TRDI+ 2 = tRDe- 3 ICT + ICT ~ 350uH MIN, TU ! TRD2+ 4 ey -1,1 dB MAX [ crit -0.5 dB MAX -L2 dB MAX = =p 01uF = > s l TRD3+ 6 = -18 oB | [ [ -12+20LOG<f/80MHz> dB TRp4- 7 heuu! 1 Oo _ a am | | O.luF D -30 dB MIN TRD4+ 8 re am, _ 4X 75 OHMS -~35 ofB MIN TRDCT1/2/3/4 9 1500 Vrms or 2250VDC GND 10 *+ sooder 2ev P = SHIELD = RoHS 2002/E5/EC, RJ45 1 TRP1+ TRP1- TRP2+ TRP2- TRP3+ TRP3- TRP4+ TRP4- ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE CHUNG 09-11-06 2X6 gigabit MagJack 08332X6R54-F TOL. IN INCH [uit ; INCH [mmj|nev.; | FOel DRAWN BY DATE (8 Cores) FILE NAME x SCALE: N/A SIZE : Ad | comowswrscc. DE 09-11-06 0833-2X6R-34-F 08332X6R54-FA.DWG x @)--=]_|pace: 2 aserly Dco02(2)0382305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY* TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC, 0.055+0,020 (1.4020,51] $I u Li Li u __ Te Le] up ~ ey 2130 [28.701 | a eTthec} _% AA MAX, 4020, ma ot { 3.430 [87.12] ay Os | PORT 12 7 a a mm oO o oZ NG of nM Zo RJ45 1 a6 8 a5 i 38 Ee oman Come Em or oF ou ou CN Oo aa { f q HI } f } RJ45 1 Peat Lone n ae no ao Wk PORT 11 0,425 (10.80) PORT 1 3,200 [81.28] NOTES: 0.185 [4.70] PLASTIC HOUSING: THERMOPLASTIC PBT FLAMMABILITY RATING UL 94V-0 CONTACT PLATING: 50 MICRO-INCH HARD GOLD PLATING OUTPUT PINS: TIN-COATED COPPER WIRE, DIA 0.018 INCH. METAL SHIELD: NICKEL PLATED ON COPPER ALLOY. CALL GROUND LEADS ARE SOLDER DIPPED) JACK CAVITY CONFORMS TO FCC RULES AND REGULATIONS, PART 68 SUBPART F. MARK PART WITH MFG LOGU, MFG NAME, PART NUMBER, AND DATE CODE. 0.550 [13.971 eWkbus UL RECOGNIZED - FILE #196366 AND 169987, TYPICAL 3. RoHS COMPLIANCE, PER EU DIRECTIVE 2002/95/EC, ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE QIN/BILL 09-11-06 2X6 gigabit MagJack 08332X6R54-F TOL. IN INCH lin; inch [mmjleev. | kOeT (8 Cores) Xx DRAWN BY DATE FILE NAME SCALE : N/A _|SIZE: Ad | comomursd, y1 0833-eX6R-54-F _ XX CONNECTED TING 09-11-06 08332X6R54-F A.DWG a soto @--==_ [pace : 3 wanes DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED *PROPRIETARY TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. PORT ASSIGNMENT CCOMPONENT SIDE VIEW) LOWER UPPER DECK DECK | Fil2eT3747sTel7?etsfioli{iel | oo 20 * oo 25 * 2% * % * of 2% of 20 10 ' 10 ofc | ele> | esieo | exc | cela | cleo oO 390 | 69 2% | ee | 2 | oe | 25 | 2 | 25 | 2 | 2 | 2 | 2 | ee 08'8o % 0 % a oy % % eo) oO 7 o6l607 @ cabs 04|40 30 1 ' 02| 20 | o Ol 3.190 [81.03] = ~- | Q O iy % 8 8 a oP 1 OP PD oP oo ey oy % % % oo oD PIN-OUT INFORMATION Sof 8 ak 8 | ae ke KSEE (COMPONENT SIDE VIEW) Oy YY T 10 | GND 9_|_TRCTI/273/4 = 8 | TRD 4+ x YY 8B 0145 [3.68] 7_[TRD 4- ~ 9 Ss 6 | TRD 3+ re SBD o 3 3.490 [88,65] 4_[TRD 2+ a oO + NOTES: 3 [TRD 2- a 6 S > TTRD Le THE SHADED AREA ON THE CUSTOMER BOARD ARE 1 [TRD 1- RECOMMENDED TO BE CLEAR OFF ANY VIA HOLE OR COMPONENT PAD, ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE QIN/BILL 09-11-06 2X6 gigabit MagJack 08332X6R54-F TOL IN INCH nit; INCH [mm]|REV.: A bel (8 Cores) x DRAWN BY DATE FILE NAME SCALE: N/A SIZE : A4 | comonewrs:2. 0833-2X6R-54-F XX CONNECTED TING 09-11-06 08332X6R54-FADWG sox Toone | O--==+- race: 4 | pc0e2(2)032305 This document is electronically generated. This is a controlled copy if used internallyPROPRIETARY TO BEL FUSE INC. AND SHALL NOT COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. THE INFORMATION CONTAINED HEREIN IS CONSIDERED BE 3.105 [78.87] 2.700 [68,58] 2595 [64.90] 2.150 [54.61] 2.005 [50.93] RoHS 2002/95/EC, 1.600 [40.64] 1.455 [36.96] 1.050 [26.67] 0.905 [22,99] 0.355 9.02] +4 0.500 [12.70] Boo 0.050 [Le7J aT 0.035 (0g9] % 90,062 [41.571 0.160 [4.06] my 120 PLACES OU 4 9 PLACES o 8 Don Ma Soo ret HO Sa SO SS Se eH , 8 | I[% ss fe fe oS SF i. t + < 5 of % 0 % oe % oe % of % + + 3 % % 3? % o % 0 % | | i Ly TX 7 | SSS SS SS SS ET eS } \ go.128 [93.25] | NK OR ep fw eo R0.030 [R0.76] 2 PLACES ~ S$ BAR B + |. 0290 (7.371 e| |e 0,110 [2,791 Go o ff | }~ 0.110 [2,791 8 2e8 8 8 |___ Sq 4S 8S 3.200 [81.28] Recommended PCB front edge oC Oo 888 cutout, The bottom shield ground tabs front> should not be seated SUGGESTED FOOTPRINT an the top of the PCB, COMPONENT SIDE VIEW) ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. [ ] METRIC DIM. AS REFERENCE QIN/BILL 09-11-06 2X6 gigabit MagJack 08332X6R54-F TOL. IN INCH |r; INCH [mmjlnev.: a | tOel 8 Cores) x DRAWN BY DATE FILE NAME . . TING 09-11-06 0833-2X6R-54-F xX SCALE ; N/A |SIZE :_A4 | comouumscss -t1- 08332X6R54-F A.DWG xx | 20004 | ~--e=-+ |[pacze: 5 | 7 DC002(2)032305 This document is electronically generated. This is a controlled copy if used internallyTHE INFORMATION CONTAINED HEREIN IS CONSIDERED PROPRIETARY* TO BEL FUSE INC. AND SHALL NOT BE COPIED, REPRODUCED OR DISCLOSED WITHOUT THE WRITTEN APPROVAL OF BEL FUSE INC. SUGGESTED PANEL OPENING b+ 3.465 [88.01] + 1.030 [26.16] COX Ss 0s NOTE: PACKING INFORMATION PACKING TRAY : 0200-9999-A9 <TOP) 0200-9999-A8 BOTTOM PACKING QUANTITY : 15 PCS FINISHED GOODS PER TRAY 7 TRAYS (05 PCS FINISHED GOODS) PER CARTON BOX CINCLUDE THE UPPERMOST AND LOWERMOST TRAY> METAL PANEL PCB NOTE + CARDBOARDS ARE PLACED BETWEEN LAYERS OF PACKING TRAY INSIDE CARTON BOX THE DISTANCE OF PANEL INSIDE SURFACE RELATIVE TO FRONT SURFACE OF PART IS ONLY A SUGGESTION. IN CASE THIS DISTANCE IS DIFFERENT, THE REQUIRED PANEL OPENING DIMENSIONS CHANGE ACCORDINGLY. RoHS 2002/95/EC, ORIGINATED BY DATE TITLE PART NO. / DRAWING NO. STANDARD DIM. { ] METRIC DIM. AS REFERENCE QIN/BILL 09-11-06 2X6 gigabit MagJack 08332X6R54-F TOL. IN INCH |i; INCH [mmjlnev.: a | kOel DRAWN BY DATE 68 Cores FILE NAME x SCALE: N/A |SIZE: A4 | comomund -11- 0833-2X6R-54-F _ XX : : CONNFETED TING 09-11-06 08332X6R54-F A.DWG Sox aoe] @--== + pace: 6 | RPE pDc002(2)032305 This document is electronically generated. This is a controlled copy if used internally