Bulletin PD-20406 rev. A 05/05 30BQ015PbF 3 Amp SCHOTTKY RECTIFIER IF(AV) = 3.0Amp VR = 15V Description/ Features Major Ratings and Characteristics The 30BQ015PbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. The proprietary barrier technology allows for reliable operation up to 125C junction temperature. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery Characteristics Value Units IF(AV) Rectangular waveform 3.0 A VRRM 15 V IFSM @ t p= 5 s sine 650 A VF @ 1.0Apk, TJ = 75C 0.30 V Ultra low forward voltage drop High frequency operation TJ range - 55 to 125 C Guard ring for enhanced ruggedness and long term reliability charging, and reverse battery protection. 125C TJ operation (VR < 5V) Optimized for OR-ing applications High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Lead-Free ("PbF" suffix) Case Styles 30BQ015PbF SMC www.irf.com 1 30BQ015PbF Bulletin PD-20406 rev. A 05/05 Voltage Ratings Part number VR 30BQ015PbF Max. DC Reverse Voltage (V) 15 VRWM Max. Working Peak Reverse Voltage (V) 25 Absolute Maximum Ratings Parameters 30BQ IF(AV) Max. Average Forward Current 3.0 Units Conditions A 4.0 IFSM Max. Peak One Cycle Non-Repetitive 650 50% duty cycle @ TL = 83 C, rectangular wave form 50% duty cycle @ TL = 78 C, rectangular wave form A Surge Current 75 EAS Non Repetitive Avalanche Energy 1.5 mJ IAR Repetitive Avalanche Current 0.5 A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied TJ = 25 C, IAS = 0.5A, L = 12mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. Va = 1.5 x Vr typical Electrical Specifications Parameters VFM IRM Max. Forward Voltage Drop 30BQ (1) 0.35 V @ 3A 0.40 V @ 6A 0.30 V @ 3A 0.35 V @ 6A Max. Reverse Leakage Current (1) CT Max. Junction Capacitance LS Typical Series Inductance dv/dt Max. Voltage Rate of Change Units Conditions TJ = 25 C TJ = 75 C 4 mA TJ = 50 mA TJ = 100 C 1120 pF VR = 5VDC (test signal range 100KHz to 1Mhz) 25C 3.0 nH 10000 V/s 25 C VR = rated VR Measured lead to lead 5mm from package body (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters 30BQ Units TJ Max. Junction Temperature Range (*) - 55 to 125 C Tstg Max. Storage Temperature Range C RthJL Max. Thermal Resistance Junction to Lead RthJA Max. Thermal Resistance Junction to Ambient wt Approximate Weight - 55 to 150 12 C/W DC operation 46 C/W DC operation (**) 0.24 (0.008) g (oz.) Case Style SMC Device Marking IR3C (*) dPtot dTj < Conditions Similar to DO-214AB 1 thermal runaway condition for a diode on its own heatsink Rth( j-a) (**) Mounted 1 inch square PCB 2 www.irf.com 30BQ015PbF Bulletin PD-20406 rev. A 05/05 10 100 10 75C 50C 1 25C 0.1 0.01 T = 100C J 0 3 6 9 12 Reverse Voltage - VR (V) T = 75C J 1 15 Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 T = 25C J Junction Capacitance - C T (p F) Instantaneous Forward Current - I F (A) Reverse Current - I R (mA) T J = 100C 0.1 T = 25C J 100 0 0.1 0.2 0.3 0.4 Forward Voltage Drop - VFM (V) 0.5 0 4 8 12 Reverse Voltage - VR (V) 16 Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Thermal Impedance Z thJC (C/W) 100 10 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 1 t2 Notes: Single Pulse (Thermal Resistance) 1. Duty factor D = t1/ t 2 2. Peak Tj = Pdm x ZthJC + Tc 0.1 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics (Per Leg) www.irf.com 3 30BQ015PbF Bulletin PD-20406 rev. A 05/05 100 1.5 D=0.20 D=0.25 D=0.33 D=0.50 D=0.75 DC 90 Average Power Loss (Watts) Allowable Lead Temperature (C) 110 80 70 Square wave (D=0.50) 80% Rated Vr applied 60 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 1 RMS Limit DC 0.5 see note (2) 0 50 0 1 2 3 4 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Average Forward Current - I F(AV) (A) Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Average Forward Dissipation Vs. Average Forward Current 1000 Non-Repetitive Surge Current - I FSM (A) Fig. 4 - Maximum Average Forward Current Vs. Allowable Lead Temperature 100 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 10 10 100 1000 10000 Square Wave Pulse Duration - Tp (Microsec) Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 30BQ015PbF Bulletin PD-20406 rev. A 05/05 Outline Table Device Marking: IR3C 2.75 (.108) 3.15 (.124) 5.59 (.220) 6.22 (.245) CATHODE 6.60 (.260) 1 7.11 (.280) ANODE 2 .152 (.006) .305 (.012) 1 POLARITY 2.00 (.079) 2.62 (.103) .102 (.004) 0.76 (.030) 1.52 (.060) 2 PART NUMBER .203 (.008) 7.75 (.305) 8.13 (.320) Outline SMC Dimensions in millimeters and (inches) For recommended footprint and soldering techniques refer to application note #AN-994 Marking & Identification Each device has 2 rows for identification. The first row designates the device as manufactured by International Rectifier, indicated by the letters "IR", and the Part Number (indicates the current, the voltage rating and Schottky Generation). The second row indicates the year, the week of manufacturing and the Site ID. IR3C VOLTAGE CURRENT IR LOGO PYWWX SITE ID WEEK 2nd digit of the YEAR "Y" = 1st digit of the YEAR "standard product" "P" = "Lead-Free" www.irf.com 5 30BQ015PbF Bulletin PD-20406 rev. A 05/05 Tape & Reel Information Dimensions in millimetres and (inches) Ordering Information Table Device Code 30 B Q 015 TR PbF 1 2 3 4 5 6 1 - 2 - Current Rating B = Single Lead Diode 3 - Q = Schottky Q Series 4 - Voltage Rating (015 = 15V) 5 - y none = Box (1000 pieces) 6 - y TR = Tape & Reel (3000 pieces) y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 05/05 6 www.irf.com