90V
80V
85V
90V
7V
4A
2A
50W
0.200°C
–65 to 200°C
7/00
2N6261
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
VCBO Collector – Base Voltage
VCEO Collector – Emitter Voltage (with base open)
VCER(sus) External Base – Emitter (RBE) = 100
W
)
VCEV(sus) Collector – Emitter Voltage (with base reverse biased)
VEBO Emitter to Base Voltage
ICContinuous Collector Current
IBContinuous Base Current
PDTotal Power Dissipation at Tcase = 25°C
Derate above 25°C
Tj,Tstg, Operating and Storage Junction Temperature Range
24.33 (0.958)
24.43 (0.962)
14.48 (0.570)
14.99 (0.590)
3.68
(0.145) rad.
max. 3.61 (0.142)
3.86 (0.145)
rad.
0.71 (0.028)
0.86 (0.034)
1.27 (0.050)
1.91 (0.750)
9.14 (0.360)
min.
4.83 (0.190)
5.33 (0.210)
6.35 (0.250)
8.64 (0.340)
11.94 (0.470)
12.70 (0.500)
HOMETAXIAL-BASE
MEDIUM POWER SILICON
NPN TRANSISTOR
FEATURES
• fT = 800 kHz at 0.2A
• Maximum Safe-area of operation curves
for dc and pulse operation.
• VCEV(sus) = 90V min
• Low Saturation Voltage:
VCE(sat = 1.0V at IC = 0.5A)
ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated)
PIN 1 — Base PIN 2 — Emitter Case is Collector.
APPLICATIONS
• Power Switching Circuits
• Series and shunt-regulator driver and
output stages
• High-fidelity amplifers
• Solenoid Drivers
MECHANICAL DATA
Dimensions in mm(inches)
TO–66
THERMAL CHARACTERISTICS
R
q
JC Thermal Resistance, Junction to Case 3.5 °C/W
In accordance with JEDEC registration data format
Parameter Test Conditions Min. Typ. Max. Unit
mA
V
—
V
MHz
0.5
0.5
1.0
0.2
80
85
5
25 100
0.5
1.5
0.03
ICEO
ICEV
IEBO
VCEO(sus)
VCER(sus)
hFE
VCE(sat)
VBE
fhfe
Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612.
E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk
2N6261
7/00
VCE = 60V IB= 0
VCE = 80V VBE = -1.5V
Tc= 150°C
VBE = -7V IB= 0
IC= 0.1A IB= 0
VBE = 5V (RBE) = 100
W
VCE = 2V IC= 4A
VCE = 2V IC= 1.5A
IC= 1.5A IB= .0.15A
VCE = 2V IC= 1.5
VCE = 4V IC= 0.1
Collector Cut-off Current
with base open
Collector – Cut-off Current
Emitter Cut-off Current
Collector – Emitter Sustaining
Voltage with base open*
External Base to Emitter
Resistance
D.C Forward Current*
Collector to Emitter Saturation
Voltage*
Base – Emitter Voltage
Common Emitter Small Signal
Short Circuit, Forward Current
Transfer Ratio Cut off
Frequency
ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated)
*Pulse test tp =300
m
s
d £
1.8%
