D../CRCW....-HR e3 Vishay Lead (Pb)-free Thick Film, Rectangular, High Value Chip Resistors FEATURES * * * * * * High resistance values (up to 470M) Suitable for voltage dividers and hybrids Metal glaze on high quality ceramic Protective overglaze Lead (Pb)-free solder contacts on Ni barrier layer Pure tin plating provides compatibility with lead (Pb)-free and lead containing soldering processes * Compatible with "Restriction of the use of Hazardous Substances" (RoHS) directive 2002/95/EC (issue 2004) STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL INCH METRIC POWER RATING P70 C W LIMITING ELEMENT VOLTAGE MAX. V RESISTANCE TEMPERATURE TOLERANCE RANGE E-SERIES COEFFICIENT % ppm/K D11/CRCW0603-HR 0603 1608 0.1 75 500 5 11M - 470M 24 D12/CRCW0805-HR 0805 2012 0.125 150 500 5 11M - 470M 24 D25/CRCW1206-HR 1206 3216 0.25 200 500 5 11M - 470M 24 Notes * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. * Marking and packaging: See appropriate catalog or web pages * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material TECHNICAL SPECIFICATIONS PARAMETER UNIT D11/CRCW0603-HR D12/CRCW0805-HR D25/CRCW1206-HR Rated Dissipation at 70 C (2) W 0.1 0.125 0.25 Limiting Element Voltage V 75 150 200 Voltage Coefficient Insulation Voltage (1 min) %/V < 100M: < 0.1/> 100M: < 0.3 Vdc/ac peak > 100 > 200 > 300 Thermal Resistance (1) K/W 550 440 220 Insulation Resistance > 10 9 Category Temperature Range C - 55 to + 155 Weight/1000 pieces g 2 5.5 10 Notes (1) (2) Measuring conditions in acc. to EN 140401-802 The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded. www.vishay.com 156 For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20022 Revision: 13-Oct-08 D../CRCW....-HR e3 Lead (Pb)-free Thick Film, Rectangular, High Value Chip Resistors Vishay PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRCW060316M0JPEAHR (1) C R C W 0 6 0 3 1 6 M 0 J P E A H R MODEL/SIZE VALUE TOLERANCE TCR PACKAGING (2) SPECIAL CRCW0603 CRCW0805 CRCW1206 M = Million J=5% P = 500 ppm/K EA EB EC EI EL Up to 2 digits HR = High Value Product Description: D11/CRCW0603-HR 500 16M 5 % ET1 e3 D11/CRCW0603-HR 500 16M 5% ET1 e3 MODEL TCR RESISTANCE VALUE TOLERANCE PACKAGING (2) LEAD (Pb)-FREE D11/CRCW0603-HR D12/CRCW0805-HR D25/CRCW1206-HR 500 ppm/K 68M = 68 M 227M = 227 M 5% ET1 ET5 ET6 EG1 E20 e3 = Pure tin Termination finish Notes (1) Preferred way for ordering products is by use of the PART NUMBER (2) Please refer to table PACKAGING, see next page PACKAGING REEL BULK PACKAGING CODE MODEL TAPE WIDTH DIAMETER PITCH PIECES/ REEL PART NUMBER PACKAGING CODE PRODUCT DESC. PIECES PAPER BLISTER PAPER BLISTER 180 mm/7" D11/CRCW0603-HR 8 mm D12/CRCW0805-HR 8 mm D25/CRCW1206-HR 8 mm 4 mm 285 mm/11.25" 4 mm 330 mm/13" 4 mm 180 mm/7" 4 mm 285 mm/11.25" 4 mm 5000 EA 10 000 EB 20 000 EC EL EI 5000 EA EB 20 000 EC EL EI 4 mm 180 mm/7" 4 mm 5 000 EA 285 mm/11.25" 4 mm 10 000 EB 20 000 EC 4 mm ET1 EG1 ET5 10 000 330 mm/13" 330 mm/13" EI PART PRODUCT NUMBER DESC. ET6 E20 ET1 EG1 ET5 ET6 E20 ET1 EG1 25 000 EY E27 10 000 EY E27 ET5 EL ET6 E20 DIMENSIONS SIZE INCH METRIC DIMENSIONS [in millimeters] L W H T1 T2 0.45 0.05 0.3 0.2 0.3 0.2 1.25 0.15 0.45 0.05 0.3 + 0.20 0603 1608 1.55 + 0.10 0.85 0.1 - 0.05 0805 2012 2.0 + 0.20 3216 3.2 + 0.10 1206 - 0.10 - 0.20 SIZE 1.6 0.15 Document Number: 20022 Revision: 13-Oct-08 - 0.10 0.55 0.05 0.45 0.2 SOLDER PAD DIMENSIONS [in millimeters] REFLOW SOLDERING WAVE SOLDERING INCH METRIC a b l a b l 0603 1608 0.5 0.9 1.0 0.9 0.9 1.0 0.3 0.2 0805 2012 0.7 1.3 1.2 0.9 1.3 1.3 0.4 0.2 1206 3216 0.9 1.7 2.0 1.1 1.7 2.3 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com 157 D../CRCW....-HR e3 Lead (Pb)-free Thick Film, Rectangular, High Value Chip Resistors 90 80 0402 0603 0805 1206 1210 70 60 50 120 Rated Power in % Temperature Rise in C Vishay 100 80 2010 60 40 2512 30 40 1218 20 20 10 0 0 0.1 0.2 0.3 0.4 Power in W Temperature Rise 0 - 55 0.5 - 25 0 25 Derating 50 75 70 100 125 155 175 Ambient Temperature in C TEST PROCEDURES AND REQUIREMENTS EN 60115-1 TEST (clause) CONDITIONS OF TEST REQUIREMENTS PERMISSIBLE CHANGE (R/R) STABILITY CLASS 2 OR BETTER Stability for product types: D../CRCW...-HR e3 Resistance (4.5) 11 M to 470 M - 5% 20/- 55/20 C and 20/125/20 C 500 ppm/K U = 2.5 x (P70 x R)1/2 2 x Umax.; Duration: according the style (0.5 % R + 0.05 ) Aging 4 h at 155 C, dryheat solder bath method; 235 C; 2 s visual examination Good tinning ( 95 % covered) no visible damage Resistance to soldering heat (4.18.2) Solder bath method; (260 5) C; (10 1) s (0.5 % R + 0.05 ) Rapid change of temperature (4.19) 30 min at LCT = - 55 C; 30 min at UCT = 125 C; 5 cycles (0.5 % R + 0.05 ) (40 2) C; 56 days; (93 3) % RH (2 % R + 0.1 ) 16 h at UCT = 125 C; 1 cycle at 55 C; 2 h at LCT = - 55 C; 1 h/1 kPa at 15 C to 35 C; 5 cycles at 55 C U = (P70 x R)1/2 U = Umax.; whichever is less severe (2 % R + 0.1 ) U = (P70 x R)1/2 U = Umax.; whichever is less severe 1.5 h ON; 0.5 h OFF; 70 C; 1000 h (2 % R + 0.1 ) Duration extended to 8000 h (4 % R + 0.1 ) UCT = 125 C; 1000 h (2 % R + 0.1 ) Temperature coefficient (4.8.4.2) Overload (4.13) Solderability (4.17.5) Damp heat, steady state (4.24) Climatic sequence (4.23) Endurance at 70 C (4.25.1) Extended endurance (4.25.1.8) Endurance at upper category temperature (4.25.3) www.vishay.com 158 For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20022 Revision: 13-Oct-08 D../CRCW....-HR e3 Lead (Pb)-free Thick Film, Rectangular, High Value Chip Resistors Vishay APPLICABLE SPECIFICATIONS * EN 60115-1 Generic Specification * EN 140400 Sectional Specification * EN 140401-802 Detail Specification * IEC 60068-2-X Variety of environmental test procedures * IEC 60286-3 Packaging of SMD components Document Number: 20022 Revision: 13-Oct-08 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com 159 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1