66
11.12
D
WIMA FKP 1
Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil
Electrodes, Schoopage Contacts, Double-Sided Metallization and Self-Healing
Internal Series Connection for Highest Current Carrying Capability
PCM 15 mm to 37.5 mm
Special Features Electrical Data
˜ Extremely high pulse duty
˜ Self-healing
˜ Internal series connection
˜ Very low dissipation factor
˜ Negative capacitance change
versus temperature
˜ According to RoHS 2011/65/EC
Typical Applications
For high pulse and high frequency
applications e.g.
˜ Switch mode power supplies
˜ Converters in drives and power
electronics
˜ Deflection systems in monitors
and TV-sets
˜ Electronic ballasts
Construction
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Aluminium foil and double-sided metallized
plastic film
Internal construction:
Plastic film
Metal foil electrode
Metal contact layer
(schoopage)
Terminating wire
Electrode carrier
plastic film metallized
on both sides
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Black.
Epoxy resin seal: Yellow
Dissipation factors at +20+ C: tan d
at f C0.1 mF 0.1 mF P C 0.22 mF
1 kHz 3 x 10-4 3 x 10-4
10 kHz 4 x 10-4 6 x 10-4
100 kHz 10 x 10-4 –
Dielectric absorption:
0.05 %
Voltage derating:
A voltage derating factor of 1.35 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages
Reliability:
Operational life 300 000 hours
Failure rate P 1 fit (0.5 x Ur and 40+ C)
Capacitance range:
100 pF to 0.22 mF (E12-values on request)
Rated voltages:
400 VDC, 630 VDC, 1000 VDC, 1250 VDC,
1600 VDC, 2000 VDC, 4000 VDC, 6000 VDC
Capacitance tolerances:
±20%, ±10%, ±5% (other tolerances are
available subject to special enquiry)
Operating temperature range:
–55+ C to +100+ C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20+ C:
C 0.1 mF: 1 x 105 M¸
(mean value: 5 x 105 M¸)
C 0.1 mF: 30 000 sec (M¸ x mF)
(mean value: 100 000 sec)
Measuring voltage: 100 V/1 min.
Test voltage:
2 Ur, 2 sec / 6 kV: 1.6 Ur, 2 sec.
Maximum pulse rise time:
Capacitance max. pulse rise time V/msec at TA < 40) C
pF/mF
400 VDC 630 VDC 1000 VDC 1250 VDC 1600 VDC 2000 VDC 4000 VDC 6000 VDC
100 ... 220 – – – – 56000 56000 – –
330 ... 680 – – – – 51000 56000 56000 56000
1000 ... 2200 29000 29000 29000 29000 46000 51000 51000 51000
3300 ... 6800 9000 14000 27000 29000 29000 29000 29000 29000
0.01 ... 0.022 9000 11000 11000 11000 11000 13000 13000 13000
0.033 ... 0.068 9000 11000 11000 11000 11000 11000 – –
0.1 ... 0.22 7000 11000 11000 11000 11000 – – –
for pulses equal to the rated voltage
Mechanical Tests
Pull test on pins:
d 0.8 l: 10 N in direction of pins
d > 0.8 l: 20 N in direction of pins
according to IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2
in accordance with IEC 60068-2-29
Packing
Available taped and reeled up to and
including case size 15 x 26 x 31.5 /
PCM 27.5 mm.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
67
11.12
Continuation
General Data
D
Capacitance 400 VDC/250 VAC* 630 VDC/400 VAC*
W H L PCM** Part number W H L PCM** Part number
1000 pF 5 11 18 15 FKP1G011004B00_ _ _ _ 5 11 18 15 FKP1J011004B00_ _ _ _
1500 „ 5 11 18 15 FKP1G011504B00_ _ _ _ 5 11 18 15 FKP1J011504B00_ _ _ _
2200 „ 5 11 18 15 FKP1G012204B00_ _ _ _ 5 11 18 15 FKP1J012204B00_ _ _ _
3300 „ 5 11 18 15 FKP1G013304B00_ _ _ _ 5 11 18 15 FKP1J013304B00_ _ _ _
4700 „ 5 11 18 15 FKP1G014704B00_ _ _ _ 5 11 18 15 FKP1J014704B00_ _ _ _
6800 „ 5 11 18 15 FKP1G016804B00_ _ _ _ 6 12.5 18 15 FKP1J016804C00_ _ _ _
0.01 mF 5 11 18 15 FKP1G021004B00_ _ _ _ 7 14 18 15 FKP1J021004D00_ _ _ _
5 14 26.5 22.5 FKP1J021005A00_ _ _ _
0.015 „ 6 12.5 18 15 FKP1G021504C00_ _ _ _ 8 15 18 15 FKP1J021504F00_ _ _ _
6 15 26.5 22.5 FKP1J021505B00_ _ _ _
0.022 „ 7 14 18 15 FKP1G022204D00_ _ _ _ 7 16.5 26.5 22.5 FKP1J022205D00_ _ _ _
5 14 26.5 22.5 FKP1G022205A00_ _ _ _
0.033 „ 8 15 18 15 FKP1G023304F00_ _ _ _ 8.5 18.5 26.5 22.5 FKP1J023305F00_ _ _ _
6 15 26.5 22.5 FKP1G023305B00_ _ _ _
0.047 „ 7 16.5 26.5 22.5 FKP1G024705D00_ _ _ _ 10.5 20.5 26.5 22.5 FKP1J024705H00_ _ _ _
9 19 31.5 27.5 FKP1J024706A00_ _ _ _
0.068 „ 8.5 18.5 26.5 22.5 FKP1G026805F00_ _ _ _ 11 21 31.5 27.5 FKP1J026806B00_ _ _ _
9 19 41.5 37.5 FKP1J026807A00_ _ _ _
0.1 mF 10.5 20.5 26.5 22.5 FKP1G031005H00_ _ _ _ 13 24 31.5 27.5 FKP1J031006D00_ _ _ _
9 19 31.5 27.5 FKP1G031006A00_ _ _ _ 11 22 41.5 37.5 FKP1J031007B00_ _ _ _
0.15 „ 11 21 31.5 27.5 FKP1G031506B00_ _ _ _ 13 24 41.5 37.5 FKP1J031507C00_ _ _ _
0.22 „ 13 24 31.5 27.5 FKP1G032206D00_ _ _ _ 15 26 41.5 37.5 FKP1J032207D00_ _ _ _
Capacitance 1000 VDC/600 VAC* 1250 VDC/600 VAC*
W H L PCM** Part number W H L PCM** Part number
1000 pF 5 11 18 15 FKP1O111004B00_ _ _ _ 5 11 18 15 FKP1R011004B00_ _ _ _
1500 „ 5 11 18 15 FKP1O111504B00_ _ _ _ 5 11 18 15 FKP1R011504B00_ _ _ _
2200 „ 5 11 18 15 FKP1O112204B00_ _ _ _ 5 11 18 15 FKP1R012204B00_ _ _ _
3300 „ 5 11 18 15 FKP1O113304B00_ _ _ _ 6 12.5 18 15 FKP1R013304C00_ _ _ _
4700 „ 6 12.5 18 15 FKP1O114704C00_ _ _ _ 7 14 18 15 FKP1R014704D00_ _ _ _
6800 „ 7 14 18 15 FKP1O116804D00_ _ _ _ 8 15 18 15 FKP1R016804F00_ _ _ _
5 14 26.5 22.5 FKP1R016805A00_ _ _ _
0.01 mF 8 15 18 15 FKP1O121004F00_ _ _ _ 7 16.5 26.5 22.5 FKP1R021005D00_ _ _ _
6 15 26.5 22.5 FKP1O121005B00_ _ _ _
0.015 „ 6 15 26.5 22.5 FKP1O121505B00_ _ _ _ 8.5 18.5 26.5 22.5 FKP1R021505F00_ _ _ _
0.022 „ 8.5 18.5 26.5 22.5 FKP1O122205F00_ _ _ _ 10.5 20.5 26.5 22.5 FKP1R022205H00_ _ _ _
0.033 „ 10.5 20.5 26.5 22.5 FKP1O123305H00_ _ _ _ 11 21 31.5 27.5 FKP1R023306B00_ _ _ _
9 19 31.5 27.5 FKP1O123306A00_ _ _ _ 9 19 41.5 37.5 FKP1R023307A00_ _ _ _
0.047 „ 11 21 31.5 27.5 FKP1O124706B00_ _ _ _ 13 24 31.5 27.5 FKP1R024706D00_ _ _ _
11 22 41.5 37.5 FKP1R024707B00_ _ _ _
0.068 „ 13 24 31.5 27.5 FKP1O126806D00_ _ _ _ 11 22 41.5 37.5 FKP1R026807B00_ _ _ _
11 22 41.5 37.5 FKP1O126807B00_ _ _ _
0.1 mF 13 24 41.5 37.5 FKP1O131007C00_ _ _ _ 15 26 41.5 37.5 FKP1R031007D00_ _ _ _
0.15 „ 15 26 41.5 37.5 FKP1O131507D00_ _ _ _ 17 29 41.5 37.5 FKP1R031507E00_ _ _ _
0.22 „ 19 32 41.5 37.5 FKP1O132207F00_ _ _ _ 19 32 41.5 37.5 FKP1R032207F00_ _ _ _
* AC voltage: f 1000 Hz; 1.4 x Urms + UDC Ur
** PCM = Printed circuit module = pin spacing
Dims. in mm.
Ionisation inception level in isolated cases may
be lower than admissible rated AC voltage.
Rights reserved to amend design data without prior notification.
WIMA FKP 1
Continuation page 68
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 148.
68
11.12
WIMA FKP 4
Continuation
General Data
D
Capacitance 1600 VDC/650 VAC* 2000 VDC/700 VAC*
W H L PCM** Part number W H L PCM** Part number
100 pF 5 11 18 15 FKP1T001004B00_ _ _ _ 5 11 18 15 FKP1U001004B00_ _ _ _
150 „ 5 11 18 15 FKP1T001504B00_ _ _ _ 5 11 18 15 FKP1U001504B00_ _ _ _
220 „ 5 11 18 15 FKP1T002204B00_ _ _ _ 5 11 18 15 FKP1U002204B00_ _ _ _
330 „ 5 11 18 15 FKP1T003304B00_ _ _ _ 6 12.5 18 15 FKP1U003304C00_ _ _ _
470 „ 5 11 18 15 FKP1T004704B00_ _ _ _ 6 12.5 18 15 FKP1U004704C00_ _ _ _
680 „ 5 11 18 15 FKP1T006804B00_ _ _ _ 6 12.5 18 15 FKP1U006804C00_ _ _ _
1000 pF 6 12.5 18 15 FKP1T011004C00_ _ _ _ 7 14 18 15 FKP1U011004D00_ _ _ _
5 14 26.5 22.5 FKP1T011005A00_ _ _ _ 5 14 26.5 22.5 FKP1U011005A00_ _ _ _
1500 „ 7 14 18 15 FKP1T011504D00_ _ _ _ 6 15 26.5 22.5 FKP1U011505B00_ _ _ _
5 14 26.5 22.5 FKP1T011505A00_ _ _ _
2200 „ 8 15 18 15 FKP1T012204F00_ _ _ _ 7 16.5 26.5 22.5 FKP1U012205D00_ _ _ _
5 14 26.5 22.5 FKP1T012205A00_ _ _ _
3300 „ 6 15 26.5 22.5 FKP1T013305B00_ _ _ _ 7 16.5 26.5 22.5 FKP1U013305D00_ _ _ _
4700 „ 7 16.5 26.5 22.5 FKP1T014705D00_ _ _ _ 8.5 18.5 26.5 22.5 FKP1U014705F00_ _ _ _
6800 „ 8.5 18.5 26.5 22.5 FKP1T016805F00_ _ _ _ 10.5 20.5 26.5 22.5 FKP1U016805H00_ _ _ _
0.01 mF 10.5 20.5 26.5 22.5 FKP1T021005H00_ _ _ _ 11 21 31.5 27.5 FKP1U021006B00_ _ _ _
0.015 „ 11 21 31.5 27.5 FKP1T021506B00_ _ _ _ 13 24 31.5 27.5 FKP1U021506D00_ _ _ _
0.022 „ 11 21 31.5 27.5 FKP1T022206B00_ _ _ _ 15 26 31.5 27.5 FKP1U022206F00_ _ _ _
13 24 41.5 37.5 FKP1U022207C00_ _ _ _
0.033 „ 13 24 31.5 27.5 FKP1T023306D00_ _ _ _ 13 24 41.5 37.5 FKP1U023307C00_ _ _ _
13 24 41.5 37.5 FKP1T023307C00_ _ _ _
0.047 „ 13 24 41.5 37.5 FKP1T024707C00_ _ _ _ 17 29 41.5 37.5 FKP1U024707E00_ _ _ _
0.068 „ 15 26 41.5 37.5 FKP1T026807D00_ _ _ _ 19 32 41.5 37.5 FKP1U026807F00_ _ _ _
0.1 mF 17 29 41.5 37.5 FKP1T031007E00_ _ _ _
* AC voltage: f 1000 Hz; 1.4 x Urms + UDC Ur
** PCM = Printed circuit module = pin spacing
Dims. in mm.
Ionisation inception level in isolated cases may
be lower than admissible rated AC voltage.
Rights reserved to amend design data without prior notification.
WIMA FKP 1
Continuation page 69
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 148.
l d PCM
0.8 15 - 27.5
1.0 37.5
pin
69
11.12
Continuation
General Data
D
Capacitance 4000 VDC/700 VAC* 6000 VDC/700 VAC*
W H L PCM** Part number W H L PCM** Part number
470 pF 5 14 26.5 22.5 FKP1X004705A00_ _ _ _ 5 14 26.5 22.5 FKP1Y004705A00_ _ _ _
680 „ 5 14 26.5 22.5 FKP1X006805A00_ _ _ _ 5 14 26.5 22.5 FKP1Y006805A00_ _ _ _
1000 pF 5 14 26.5 22.5 FKP1X011005A00_ _ _ _ 5 14 26.5 22.5 FKP1Y011005A00_ _ _ _
1500 „ 7 16.5 26.5 22.5 FKP1X011505D00_ _ _ _ 7 16.5 26.5 22.5 FKP1Y011505D00_ _ _ _
2200 „ 8.5 18.5 26.5 22.5 FKP1X012205F00_ _ _ _ 10.5 20.5 26.5 22.5 FKP1Y012205H00_ _ _ _
3300 „ 10.5 20.5 26.5 22.5 FKP1X013305H00_ _ _ _ 10.5 20.5 26.5 22.5 FKP1Y013305H00_ _ _ _
4700 „ 11 21 31.5 27.5 FKP1X014706B00_ _ _ _ 11 21 31.5 27.5 FKP1Y014706B00_ _ _ _
6800 „ 13 24 31.5 27.5 FKP1X016806D00_ _ _ _ 13 24 31.5 27.5 FKP1Y016806D00_ _ _ _
0.01 mF 15 26 31.5 27.5 FKP1X021006F00_ _ _ _ 15 26 31.5 27.5 FKP1Y021006F00_ _ _ _
0.015 „ 13 24 41.5 37.5 FKP1X021507C00_ _ _ _ 13 24 41.5 37.5 FKP1Y021507C00_ _ _ _
0.022 „ 17 29 41.5 37.5 FKP1X022207E00_ _ _ _ 17 29 41.5 37.5 FKP1Y022207E00_ _ _ _
* AC voltage: f 1000 Hz; 1.4 x Urms + UDC Ur
** PCM = Printed circuit module = pin spacing
Dims. in mm.
Ionisation inception level in isolated cases may
be lower than admissible rated AC voltage.
Rights reserved to amend design data without prior notification.
WIMA FKP 1
Permissible AC voltage
in relation to frequency
at 10) C internal temperature rise
(general guide).
400 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
2
10
5
2
10
250
2
1
U
V
rms
0.022 µF
0.01 µF
4700 pF
2200 pF
1000 pF
0.22 µF
0.047 µF
0.1 µF
630 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
2
10
5
2
10
400
2
1
U
V
rms
4700 pF 2200 pF
1000 pF
0.047 µF
0.1 µF
0.22 µF
0.022 µF
0.01 µF
1000 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
2
10
5
2
10
600
2
1
U
V
rms
2200 pF
1000 pF
0.022 µF
0.01 µF
0.047 µF
0.1 µF
0.22 µF
4700 pF
1250 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
10
5
2
10
600
2
1
U
V
rms
2200 pF
0.047 µF
0.022 µF
0.01 µF
0.1 µF
0.22 µF
4700 pF
1000 pF
1600 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
2
10
5
2
10
650
2
1
U
V
rms
1000 pF
0.047 µF
0.022 µF
0.1 µF
100 -470 pF
2200 pF
4700 pF
0.01µF
4000 VDC
6000 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
2
10
5
2
10
700
2
1
U
V
rms
0.022 µF
4700 pF
2200 pF
1000 pF
470 pF
0.01 µF
Part number completion:
Tolerance: 20 % = M
10 % = K
5 % = J
Packing: bulk = S
Pin length: 6-2 = SD
Taped version see page 148.
2000 VDC
f
Hz
10 2 5 10 2 5 10 2 5 10
3 4 5 6
5
2
10
5
2
10
700
2
1
U
V
rms
0.068 µF
0.022 µF
100 pF
4700 pF
1500 pF
220 pF
0.01 µF
14
11.12
D
Recommendation for Processing
and Application of
Through-Hole Capacitors
Soldering Process
A preheating of through-hole WIMA
capacitors is allowed for temperatures
Tmax P 100 ° C.
In practice a preheating duration of
t P 5 min. has been proven to be best.
Single wave soldering
Soldering bath temperature: T P 260 ° C
Immersion time: t P 5 sec
Double wave soldering
Soldering bath temperature: T P 260 ° C
Immersion time: 2 x t P 3 sec
Due to different soldering processes and
heat requirements the graphs are to be
regarded as a recommendation only.
WIMA Quality and Environmental Philosophy
ISO 9001:2008 Certification
ISO 9001:2008 is an international basic
standard of quality assurance systems for
all branches of industry. The approval
according to ISO 9001:2008 of our
factories by the VDE inspectorate certifies
that organisation, equipment and moni-
toring of quality assurance in our factories
correspond to internationally recognized
standards.
WIMA WPCS
The WIMA Process Control System (WPCS)
is a quality surveillance and optimization
system developed by WIMA. WPCS is a
major part of the quality-oriented WIMA
production. Points of application of WPCS
during production process:
” incoming material inspection
” metallization
” film inspection
” schoopage
” pre-healing
” pin attachment
” cast resin preparation/
encapsulation
” 100% final inspection
” AQL check
WIMA Environmental Policy
All WIMA capacitors, irrespective of
whether through-hole devices or SMD,
are made of environmentally friendly
materials. Neither during manufacture
nor in the product itself any toxic
substances are used, e.g.
– Lead – PBB/PBDE
– PCB – Arsenic
– CFC – Cadmium
– Hydrocarbon chloride – Mercury
– Chromium 6+ – etc.
We merely use pure, recyclable materials
for packing our components, such as:
” carton
” cardboard
” adhesive tape made of paper
” polystyrene
We almost completely refrain from using
packing materials such as:
” foamed polystyrene (Styropor®)
” adhesive tapes made of plastic
” metal clips
RoHS Compliance
According to the RoHS Directive 2011/65/EC
certain hazardous substances like e.g. lead,
cadmium, mercury must not be used any
longer in electronic equipment as of July 1st,
2006. For the sake of the environment WIMA
has refraind from using such substances since
years already.
WIMA capacitors are lead free
in accordance with RoHS 2011/65/EC
WIMA Kondensatoren sind bleifrei
konform RoHS 2011/65/EC
Tape for lead-free WIMA capacitors
DIN EN ISO 14001:2004
WIMA’s environmental management has
been established in accordance with the
guidelines of DIN EN ISO 14001:2004 to
optimize the production processes with
regard to energy and resources.
148
11.12
D
P
P1
P0
P2
F
d
P
P1
H1
H
P0
d
P2
F
t
D0
W2
Vh
W0
P1
P2
P0
P
H1
H
W
1
W
d
F
Diagram 1:
PCM 2.5/5/7.5mm
Diagram 3: PCM 22.5 and 27.5*mm
*PCM 27.5 taping possible with two feed holes between components
Diagram 2: PCM 10/15 mm
Dimensions for Radial Taping
Designation Symbol PCM 2.5 taping PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping
Carrier tape width W 18.0
p0.5
18.0
p0.5
18.0
p0.5
18.0
p0.5
18.0
p0.5
18.0
p0.5
18.0
p0.5
Hold-down tape width W
0
6.0 for hot-sealing 6.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing 12.0 for hot-sealing
adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape
Hole position W
1
9.0
p0.5
9.0
p0.5
9.0
p0.5
9.0
p0.5
9.0
p0.5
9.0
p0.5
9.0
p0.5
Hold-down tape position W
2
0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max.
Feed hole diameter D
0
4.0
p0.2
4.0
p0.2
4.0
p0.2
4.0
p0.2
4.0
p0.2
4.0
p0.2
4.0
p0.2
Pitch of component P 12.7
p1.0
12.7
p1.0
12.7
p1.0
25.4
p1.0
25.4
p1.0
38.1
p1.5
3
*8.1
p1.5
or 50.8
p1.5
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
cumulative pitch
Feed hole pitch P
0
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
12.7
p0.3 error max.
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
1.0 mm/20 pitch
Feed hole centre P
1
5.1
p0.5
3.85
p0.7
2.6
p0.7
7.7
p0.7
5.2
p0.7
7.8
p0.7
5.3
p0.7
to pin
Hole centre to P
2
6.35
p1.3
6.35
p1.3
6.35
p1.3
12.7
p1.3
12.7
p1.3
19.05
p1.3
19.05
p1.3
component centre
Feed hole centre to bottom H 16.5
p0.3
16.5
p0.3
16.5
p0.5
16.5
p0.5
16.5
p0.5
16.5
p0.5
16.5
p0.5
edge of the component 18.5
p0.5
18.5
p0.5
18.5
p0.5
18.5
p0.5
18.5
p0.5
18.5
p0.5
18.5
p0.5
Feed hole centre to top H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
H+H
component
< H
1
edge of the component 32.25 max. 32.25 max. 24.5 to 31.5 25.0 to 31.5 26.0 to 37.0 30.0 to 43.0 35.0 to 45.0
Pin spacing at F 2.5
p0.5
5.0
+0.8
7.5
p0.8
10.0
p0.8
15
p0.8
22.5
p0.8
27.5
p0.8
upper edge of carrier tape
–0.2
Pin diameter d 0.4
p0.05
0.5
p0.05
„
0.5
p0.05
or
0.6
–0.05
„
0.5
p0.05
or
0.6
–0.05
0.8
–0.05
0.8
–0.05
0.8
–0.05
Component alignment Dh p 2.0 max. p 2.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max.
Total tape thickness t 0.7
p0.2
0.7
p0.2
0.7
p0.2
0.7
p0.2
0.7
p0.2
0.7
p0.2
0.7
p0.2
ROLL/AMMO AMMO
Package
(see also page 149)
Unit see details page 150.
Dims in mm.
„ Diameter of pins see General Data. Please clarify customer-specific deviations with the manufacturer.
* PCM 10 and PCM 15 can be crimped to PCM 7.5.
Position of components according to PCM 7.5 (sketch 1). P0 = 12.7 or 15.0 is possible
REEL
P 360 max.
B
52 p2 depending on
P 30 p1 58 p2 comp. dimensions
52 p2 54 p2 depending
REEL
P 360 max. B 58 p2
or
REEL
P 500 max. B 60 p2 on PCM and
P 30 p1 66 p2 P 25 p1 68 p2 component dimensions
+0.06 +0,06 +0,08 +0,08 +0.08
Typical Dimensions for
Taping Configuration
149
11.12
D
˜ ROLL Packaging ˜ AMMO Packaging ˜ REEL Packaging
Labelling of package units in
plain text and with
alphanumerical Bar Code
Scanner decoding of
„ WIMA supplier number
„ Customer‘s P/O number
„ Customer‘s part number
„ WIMA confirmation number
„ WIMA part number
„ Lot number
„ Date code
„ Quantity
In addition part description of
– article
– capacitance value
– rated voltage
– dimensions
– capacitance tolerance
– packing
as well as gross weight and customer‘s
name are indicated in plain text.
BARCODE „Code 39”
BAR CODE (Labelling)
50 max.
70 max.
340 max.
490 max.
340 max.
370 max.
�
30 1±
25 1±
360 max.
500 max.
B
340 max.
340 max.
50 max.
Types of Tape Packaging of
Capacitors for Automatic
Radial Insertion
150
11.12
D
Packing Quantities for Capacitors with
Radial Pins in PCM 2.5 mm to 22.5 mm
* TPS (Tray-Packing-System). Plate versions may have different packing units. Moulded versions. Rights reserved to amend design data without prior notification.
Samples and pre-production needs on request.
PCM Size
pcs. per packing unit
bulk
ROLL REEL AMMO
P 360 P 500 340 x 340 490 x 370
H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5
W H L Codes S N O F I H J A C B D
2.5 mm
2.5 7 4.6 0B 5000 2200 2500 – 2800 –
3 7.5 4.6 0C 5000 2000 2300 – 2300 –
3.8 8.5 4.6 0D 5000 1500 1800 – 1800 –
4.6 9 4.6 0E 5000 1200 1500 – 1500 –
5.5 10 4.6 0F 5000 900 1200 – 1200 –
5 mm
2.5 6.5 7.2 1A 5000 2200 2500 – 2800 –
3 7.5 7.2 1B 5000 2000 2300 – 2300 –
3.5 8.5 7.2 1C 5000 1600 2000 – 2000 –
4.5 6 7.2 1D 6000 1300 1500 – 1500 –
4.5 9.5 7.2 1E 4000 1300 1500 – 1500 –
5 10 7.2 1F 3500 1100 1400 – 1400 –
5.5 7 7.2 1G 4000 1000 1200 – 1200 –
5.5 11.5 7.2 1H 2500 1000 1200 – 1200 –
6.5 8 7.2 1I 2500 800 1000 – 1000 –
7.2 8.5 7.2 1J 2500 700 1000 – 1000 –
7.2 13 7.2 1K 2000 700 950 – 1000 –
8.5 10 7.2 1L 2000 600 800 – 800 –
8.5 14 7.2 1M 1500 600 800 – 800 –
11 16 7.2 1N 1000 500 600 – 400 –
7.5 mm
2.5 7 10 2A 5000 – 2500 4400 2500 –
3 8.5 10 2B 5000 – 2200 4300 2300 4150
4 9 10 2C 4000 – 1700 3200 1700 3100
4.5 9.5 10.3 2D 3500 – 1500 2900 1400 2800
5 10.5 10.3 2E 3000 – 1300 2500 1300 –
5.7 12.5 10.3 2F 2000 – 1000 2200 1100 –
7.2 12.5 10.3 2G 1500 – 900 1800 1000 –
10 mm
3 9 13 3A 3000 – 1100 2200 – 1900
4 8.5 13.5 FA 3000 – 900 1600 – 1450
4 9 13 3C 3000 – 900 1600 – 1450
4 9.5 13 3D 3000 – 900 1600 – 1400
5 10 13.5 FB 2000 – 700 1300 – 1200
5 11 13 3F 3000 – 700 1300 – 1200
6 12 13 3G 2400 – 550 1100 – 1000
6 12.5 13 3H 2400 – 550 1100 – 1000
8 12 13 3I 2000 – 400 800 – 740
15 mm
5 11 18 4B 2400 – 600 1200 – 1150
5 13 19 FC 1000 – 600 1200 – 1200
6 12.5 18 4C 2000 – 500 1000 – 1000
6 14 19 FD 1000 – 500 1000 – 1000
7 14 18 4D 1600 – 450 900 – 850
7 15 19 FE 1000 – 450 900 – 850
8 15 18 4F 1200 – 400 800 – 740
8 17 19 FF 500 – 400 800 – 740
9 14 18 4H 1200 – 350 700 – 650
9 16 18 4J 900 – 350 700 – 650
10 18 19 FG 500 – 300 650 – 590
11 14 18 4M 1000 – 300 600 – 540
22.5 mm
5 14 26.5 5A 1200 – – 800 – 770
6 15 26.5 5B 1000 – – 700 – 640
7 16.5 26.5 5D 760 – – 600 – 550
8 20 28 FH 500 – – 500 – 480
8.5 18.5 26.5 5F 500 – – 480 – 450
10 22 28 FI 540*– – 420 – 380
10.5 19 26.5 5G 680*– – 400 – 360
10.5 20.5 26.5 5H 680*– – 400 – 360
11 21 26.5 5I 680*– – 380 – 350
12 24 28 FJ 450*– – 350 – 310
151
11.12
D
* for 2-inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification.
* TPS (Tray-Packing-System). Plate versions may have different packing units.
Samples and pre-production needs on request.
Packing Quantities for Capacitors with
Radial Pins in PCM 27.5 mm to 52.5 mm
PCM Size
pcs. per packing unit
bulk
ROLL REEL AMMO
P 360 P 500 340 x 340 490 x 370
H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5
W H L Codes S N O F I H J A C B D
27.5 mm
9 19 31.5 6A 640*– – 460/340* – 420
11 21 31.5 6B 544*– – 380/280* – 350
13 24 31.5 6D 448*– – 300 – 290
13 25 33 FK 336*–––––
15 26 31.5 6F 384*– – 270 – 250
15 26 33 FL 288*–––––
17 29 31.5 6G 176*–––––
17 34.5 31.5 6I 176*–––––
19 30 31.5 6L 50*–––––
20 32 33 FM 216*–––––
20 39.5 31.5 6J 144*–––––
37.5 mm
9 19 41.5 7A 480*–––––
11 22 41.5 7B 408*–––––
13 24 41.5 7C 252*–––––
15 26 41.5 7D 144*–––––
17 29 41.5 7E 132*–––––
19 32 41.5 7F 108*–––––
20 39.5 41.5 7G 108*–––––
24 45.5 41.5 7H 84*–––––
31 46 41.5 7I 72*–––––
35 50 41.5 7J 35*–––––
40 55 41.5 7K 28*–––––
48.5 mm
19 31 56 8D 50*–––––
23 34 56 8E 72*–––––
27 37.5 56 8H 60*–––––
33 48 56 8J 48*–––––
37 54 56 8L 25*–––––
52.5 mm 35 50 57 9F 25*–––––
45 55 57 9H 20*–––––
45 65 57 9J 20*–––––
146
11.12
D
A WIMA part number consists of 18 digits and is composed as follows:
Field 1 - 4: Type description
Field 5 - 6: Rated voltage
Field 7 - 10: Capacitance
Field 11 - 12: Size and PCM
Field 13 - 14: Version code (e.g. Snubber versions)
Field 15: Capacitance tolerance
Field 16: Packing
Field 17 - 18: Lead length (untaped)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D
MKS 2 63 VDC 0.01 mF 2.5 x 6.5 x 7.2 -20 %bulk 6 -2
WIMA Part Number System
The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the
pages of the respective WIMA range.
Type description: Rated voltage: Capacitance: Size: Tolerance:
SMD-PET = SMDT 2.5 VDC = A1 22 pF = 0022 4.8 x 3.3 x 3 Size 1812 = KA 20 % = M
SMD-PPS = SMDI 4 VDC = A2 47 pF = 0047 4.8 x 3.3 x 4 Size 1812 = KB 10 % = K
FKP 02 = FKP0 14 VDC = A3 100 pF = 0100 5.7 x 5.1 x 3.5 Size 2220 = QA 5 % = J
MKS 02 = MKS0 28 VDC = A4 150 pF = 0150 5.7 x 5.1 x 4.5 Size 2220 = QB 2.5 % = H
FKS 2 = FKS2 40 VDC = A5 220 pF = 0220 7.2 x 6.1 x 3 Size 2824 = TA 1 % = E
FKP 2 = FKP2 5 VDC = A6 330 pF = 0330 7.2 x 6.1 x 5 Size 2824 = TB ...
MKS 2 = MKS2 50 VDC = B0 470 pF = 0470 10.2 x 7.6 x 5 Size 4030 = VA
MKP 2 = MKP2 63 VDC = C0 680 pF = 0680 12.7 x 10.2 x 6 Size 5040 = XA
FKS 3 = FKS3 100 VDC = D0 1000 pF = 1100 15.3 x 13.7 x 7 Size 6054 = YA Packing:
FKP 3 = FKP3 160 VDC = E0 1500 pF = 1150 2.5 x 7 x 4.6 PCM 2.5 = 0B AMMO H16.5 340 x 340 = A
MKS 4 = MKS4 250 VDC = F0 2200 pF = 1220 3 x 7.5 x 4.6 PCM 2.5 = 0C AMMO H16.5 490 x 370 = B
MKP 4 = MKP4 400 VDC = G0 3300 pF = 1330 2.5 x 6.5 x 7.2 PCM 5 = 1A AMMO H18.5 340 x 340 = C
MKP 10 = MKP1 450 VDC = H0 4700 pF = 1470 3 x 7.5 x 7.2 PCM 5 = 1B AMMO H18.5 490 x 370 = D
FKP 4 = FKP4 600 VDC = I0 6800 pF = 1680 2.5 x 7 x 10 PCM 7.5 = 2A REEL H16.5 360 = F
FKP 1 = FKP1 630 VDC = J0 0.01 mF= 2100 3 x 8.5 x 10 PCM 7.5 = 2B REEL H16.5 500 = H
MKP-X2 = MKX2 700 VDC = K0 0.022 mF= 2220 3 x 9 x 13 PCM 10 = 3A REEL H18.5 360 = I
MKP-X2 R = MKXR 800 VDC = L0 0.047 mF= 2470 4 x 9 x 13 PCM 10 = 3C REEL H18.5 500 = J
MKP-Y2 = MKY2 850 VDC = M0 0.1 mF= 3100 5 x 11 x 18 PCM 15 = 4B ROLL H16.5 = N
MP 3-X2 = MPX2 900 VDC = N0 0.22 mF= 3220 6 x 12.5 x 18 PCM 15 = 4C ROLL H18.5 = O
MP 3-X1 = MPX1 1000 VDC = O1 0.47 mF= 3470 5 x 14 x 26.5 PCM 22.5 = 5A BLISTER W12 180 = P
MP 3-Y2 = MPY2 1100 VDC = P0 1 mF= 4100 6 x 15 x 26.5 PCM 22.5 = 5B BLISTER W12 330 = Q
MP 3R-Y2 = MPRY 1200 VDC = Q0 2.2 mF= 4220 9 x 19 x 31.5 PCM 27.5 = 6A BLISTER W16 330 = R
Snubber MKP = SNMP 1250 VDC = R0 4.7 mF= 4470 11 x21 x 31.5 PCM 27.5 = 6B BLISTER W24 330 = T
Snubber FKP = SNFP 1500 VDC = S0 10 mF= 5100 9 x 19 x 41.5 PCM 37.5 = 7A Bulk/TPS Standard = S
GTO MKP = GTOM 1600 VDC = T0 22 mF= 5220 11 x 22 x 41.5 PCM 37.5 = 7B ...
DC-LINK MKP 3 = DCP3 2000 VDC = U0 47 mF= 5470 94 x 49 x 182 DCH_ = H0
DC-LINK MKP 4 = DCP4 2500 VDC = V0 100 mF= 6100 94 x 77 x 182 DCH_ = H1
DC-LINK MKP 4S = DCPS 3000 VDC = W0 220 mF= 6220 ...
DC-LINK MKP 5 = DCP5 4000 VDC = X0 1 F = A010
DC-LINK MKP 6 = DCP6 6000 VDC = Y0 2.5 F = A025
DC-LINK HC = DCH_ 250 VAC = 0W 50 F = A500 Version code:
DC-LINK HY = DCHY 275 VAC = 1W 100 F = B100 Standard = 00 Lead length (untaped)
SuperCap C = SCSC 300 VAC = 2W 110 F = B110 Version A1 = 1A 3.5 ±0.5 = C9
SuperCap MC = MC_ _ 400 VAC = 3W 600 F = B600 Version A1.1.1 = 1B 6 -2 = SD
SuperCap C60 = SCSC 440 VAC = 4W 1200 F = C120 Version A2 = 2A 16 ±1 = P1
SuperCap R = SCSR 500 VAC = 5W ... ... ...
SuperCap MR = MRPP ...