DC/DC CONVERTERS POLA Non-isolated 1
NEW Product
File Name: pth03030.pdf Rev (03): 5 Apr 2004
International Safety Standard Approvals (pending)
UL/cUL CAN/CSA 22.2 No. (TBD)
UL 60950 File No. (TBD)
TÜV TÜV Product Service (EN60950)
Certificate No. (TBD). CB report and certificate to IEC60950
2 YEAR WARRANTY
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
Cin = 100µF, Cout = 0µF SPECIFICATIONS
TÜV
The
PTH03050
is a next generation series of non-isolated DC/DC converters offering
some of the most advanced POL features available in the industry. The primary new
feature provides for sequencing between multiple modules, a function, which is becoming
a necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring
controlled power-up and power-down. Other industry leading features include margin
up/down controls, pre-bias start-up capability and efficiencies up to 94%. The
PTH03050
has an input voltage of
2.95V - 3.65V
and offers a wide
0.8V to 2.5V
output voltage range
with up to 6A output current, which allows for maximum design flexibility and a pathway
for future upgrades.
•6A output current
•3.3V input voltage
•Wide-output voltage adjust (0.8V to 2.5V)
•Auto-track™ sequencing*
•Margin up/down controls
•Pre-bias start-up capability
•Efficiencies up to 94%
•Output ON/OFF inhibit
•Output voltage sense
•Point-of-Load-Alliance (POLA) compatible
*Auto-track™ is a trade mark of
Texas Instruments
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency (See Efficiency Table) 94% max.
Insulation voltage Non-isolated
Switching frequency 600kHz typ. ±50kHz
Approvals and EN60950
standards (pending) UL/cUL60950
Material flammability UL94V-0
Dimensions (L x W x H) 22.10 x 12.57 x 8.50mm
0.870 x 0.495 x 0.335in
Weight 2.9g (0.10oz)
MTBF Telcordia SR-332 7,092,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40ºC to +85ºC
(See Note 2) temperature
Non-operating -40ºC to +125ºC
PROTECTION
Short-circuit protection Auto reset 12A typ.
PTH03050
3.3Vin single output
OUTPUT SPECIFICATIONS
Voltage adjustability (See Note 4) 0.8V to 2.5V
Setpoint accuracy ±2.0% Vo
Line regulation ±10mV typ.
Load regulation ±12mV typ.
Total regulation ±3.0% Vo
Minimum load 0A
Ripple and noise 20MHz bandwidth 20mV pk-pk
Temperature co-efficient -40ºC to +85ºC ±0.5% Vo
Transient response 70µs recovery time
(See Note 5) Overshoot/undershoot 100mV
INPUT SPECIFICATIONS
Input voltage range (See Note 3) 2.95V to 3.65V
Input current No load 10mA typ.
Remote ON/OFF (See Note 1) Active high
Start-up time 1V/ms
Undervoltage lockout 3.7V to 4.3V typ.
Track input voltage Pin 2 (See Note 6, 7) ±0.3Vin