H Optocoupler Option for 5000 V rms/1 Minute Requirement Technical Data OPTION 020 Features * Special Construction and Testing * UL Recognition for 5000 V rms/1 Minute Requirement (File No. E55361) Description Option 020 consists of special construction on a wide range of Hewlett-Packard plastic optocouplers. After assembly, each unit is subjected to an equivalent electrical performance test to ensure its capability to withstand 5000 V rms input to output for one minute. This test is recognized by Underwriters Laboratory as proof that these components may be used in many high voltage applications. Applications Dielectric withstand voltage ratings are required by Underwriters Laboratory when components are used in certain types of electronic equipment. The voltage rating depends on the 1-478 type of electronic equipment and the specific application within the equipment. The 5000 V rms/1 Minute dielectric withstand voltage rating provided by Option 020 offers excellent high voltage input to output protection. Some applicable UL documents are listed below. UL Spec Number 114 347 508 544 773 916 1012 1244 1410 1950 DEVICE MARKING TYPE NUMBER HP XXXX L YYWW PIN ONE OPTION CODE LETTER FOR OPTION 020 DATE CODE Specification Title Appliance and Business Equipment High Voltage Industrial Control Equipment Industrial Control Equipment Medical and Dental Equipment Plug-in, Locking Type Photocontrols Standard for Energy Management Equipment Power Supplies Electrical and Electronic Measuring and Testing Equipment Television and Video Products Information Technology Equipment Including Electrical Business Equipment 5965-2746E Specifications Ordering Information All specifications for optocouplers remain unchanged when this option is ordered. The 5000 V rms/1 Minute capability is validated by a factory 6200 VAC/1 Second dielectric voltage withstand test. To obtain this high voltage capability on plastic optocouplers order the standard part number and Option 020. Examples: 6N135#020 HCPL-2001#020 This option may also be combined with option #300 (gullwing surface mount) or #500 (gullwing in tape & reel). To obtain these combinations order option #320 or #520 respectively. Examples: 6N135#320 (gullwing surface mount and 5000 VAC/1 min) HCPL-2601#520 (gullwing surface mount and 5000 VAC/ 1 min) in tape & reel This option is currently available on the following plastic optocouplers. 6N135/6 6N137 6N138/9 HCPL-2502/3 HCPL-2601/11 HCPL-261A/N HCPL-4562 HCPL-4502/3/4 HCPL-4504/6 HCPL-2530/1/3, -4534 HCPL-2630/1, -4661 HCPL-263A/N HCPL-2730/1 Contact your local HP Sales Representative concerning availability of this option for optocouplers not listed. 1-479