Q SERIES O12mm (.472") Panel Mount LED Indicators Distinctive features and specification Q12_VOY1704R3US Features * 12mm panel mounting LED indicator * 8mm colored diffused epoxy lens or 8mm water clear super bright LEDs * Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body * * * * * Prominent recessed and flush bezel style 2VDC - 220VAC (2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VDC 28VDC 110VAC 220VAC Operating Voltage (Min to Max) 1.8 to 3.3VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC 99 to 121VAC 207 to 253VAC Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA 6mA 3mA Max Reverse Voltage: 5V Viewing Angle: 30-100 (dependant on model) Life Expectancy: 100,000 hours Temperature Range: -40 to +85C (operating & storage) Torque: 75cNm O 12.00 +0.15/-0.0 PANEL CUTOUT 15,00 0,591 AF 2,00 0,079 M12 x 0,75 THREAD Flush Standard LED Intensity Prominent and Recessed Forward Voltage N/A HE Red 350mcd 2.0V N/A Green 60mcd 2.2V N/A Yellow 50mcd 2.1V N/A Blue 800mcd 3.3V 330mcd N/A Blue 3.1V White 1,200mcd 3.3V N/A 2,180mcd White 3.1V N/A N/A Orange 100mcd 2.0V N/A Bi-color (Typical) (Red/Green) 20/10mcd 2.0V/2.2V N/A Tri-color (Typical) (Red/Green/Yellow) 80/15/13mcd 2.0V/2.2V/2.1V Bi-color - The color is changed by reversing the polarity of the supply voltage. Tri-color - The indicator has red and green LEDs, when both connected yellow is produced. Super Bright LED HE Red Green Yellow Blue White Orange Hyper Bright LED HE Red Green Yellow Orange Prominent and Recessed 3,000mcd 8,000mcd 1,100mcd 1,500mcd 1,200mcd 2,000mcd Flush N/A N/A N/A N/A N/A N/A Flush Prominent and Recessed N/A 1,120mcd N/A 1,560mcd 1,120mcd N/A 1,120mcd N/A Luminous intensity will be reduced with lower operating current. Forward Voltage 2.2V 3.3V 2.3V 3.3V 3.3V 2.2V Forward Voltage 2.0V 3.3V 2.0V 2.2V Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current. Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal. APEM www.apem.com 1 Q SERIES O12mm (.472") Panel Mount LED Indicators Technical Drawings 0,50 0,020 2,00 [0,078] 2,00 [0,078] 2,8x0,8[0.11x0,031] M12x0,75 4,50 0,177 8,75 0,344 10,00 0,394 9,35 0,368 31,75 1,250 4,50 0,177 8,75 0,344 27,50 1,083 WIRES 13,50 0,531 REAR EPOXY PINS M12x0,75 13,50 0,531 M12x0,75 6,00 0,236 4,50 0,177 200,0+/-10 [7,874+/-0,393] 4,50 0,177 8,75 0,344 4,50 0,177 8,75 0,344 16,00 0,630 31,75 1,250 13,50 0,531 0,50 0,020 SQ 2,50 0,098 1,25 0,049 6,00 0,236 4,50 0,177 27,50 1,083 WIRES REAR EPOXY PINS M12x0,75 M12x0,75 13,50 0,531 13,50 0,531 2 5,00 0,197 8,75 0,344 27,50 1,083 200,00+/-10 [7.874x0.393] 5,00 0,197 8,75 0,344 16,00 0,630 20,00 0,787 18,50 0,728 5,00 0,197 8,75 0,344 13,50 0,531 17,50 0,689 16,00 0,630 www.apem.com SHORT BODY WIRES 13,50 0,531 0,50 0,020 2,50 0,098 1,25 0,049 M12x0,75 0,50 0,020 SQ 2,50 0,098 1,25 0,049 10,00 0,394 9,35 0,368 SHORT BODY PINS 13,50 0,531 13,50 0,531 13,50 0,531 M12x0,75 Drawing REAR EPOXY WIRES 200,00+/-10 [7,874+/-0,393] PINS 13,50 0,531 13,50 0,531 M12x0,75 5,00 0,197 8,75 0,344 5,00 0,197 8,75 0,344 200,0+/-10 [7,874+/-0,393] SOLDER LUG/FASTONS 2,8x0,8[0,11x0,031] 5,00 ,197 8,75 0,344 M12x0,75 M12x0,75 4,50 0,177 8,75 0,344 16,00 [0,629] 17,50 0,689 16,00 0,630 RECESSED BEZEL SHORT BODY WIRES 0,50 0,020 1,25 0,001 1,25 0,049 M12x0,75 200,0+/-10 [7,874+/-0,393] 4,50 0,177 8,75 0,344 13,50 0,531 20,00 0,787 18,50 0,728 SHORT BODY PINS 13,50 0,531 13,50 0,531 REAR EPOXY WIRES M12x0,75 4,50 0,177 8,75 0,344 13,50 0,531 27,50 1,083 0,50 0,020 1,25 0,049 1,25 0,049 M12x0,75 PINS 13,50 0,531 13,50 0,531 SOLDER LUG/FASTONS PROMINENT BEZEL 5,00 0,197 8,75 0,344 16,00 0,630 M12x0,75 200,00+/-10 [7,874+/-0,393] APEM Q SERIES O12mm (.472") Panel Mount LED Indicators Flush Bezel Overview STANDARD OPTIONS The Q12 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 12 F 5 B XX G 12 E SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING 1 = Solder Lug/ Fastons (2.8 x 0.8) C = Bright Chrome XX = Fixed Light HR = Hyper Bright Red 02 = no resistor* (Blank) = Unsealed B = Black Chrome HG = Hyper Bright Green 06 = 6VDC E = IP67 4 = Rear epoxy Pins G = Satin Grey HY = Hyper Bright Yellow 12 = 12VDC B = Blue 12A = 12VAC/DC W = White 24 = 24VDC HO = Hyper Bright Orange 24A = 24VAC/DC Q 12 = O12mm F = Flush 5 = Rear epoxy Wires 28 = 28VDC 28A = 28VAC/DC 110 = 110VAC 220 = 220VAC Example Q12F5GXXR12E O12mm, flush bezel, epoxy wires, bright chrome finish, fixed light, red, 12VDC LED, IP67 panel sealed * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternative voltage consult APEM * Take care when soldering to the Faston terminals (recommended solder temperature 300C - 3 sec) * Max voltage for pins and wires is 28V * Maximum panel thickness 7mm * 110VAC and 220VAC only available with solder lug/Faston terminals * = For resistorless versions (02) please refer to the forward voltage on page 1 4 www.apem.com APEM Q SERIES O12mm (.472") Panel Mount LED Indicators Technical Drawings 1,25 0,049 9,00 0,354 14,40 0,567 0,50 0,020 2,54 0,100 1,27 0,050 10,00 0,394 9,35 0,368 32,65 1,285 M12x0,75 REAR EPOXY PINS 19,00 0,748 17,50 0,689 13,50 0,531 REAR EPOXY WIRES M12x0,75 1,25 0,049 9,00 0,354 14,40 0,567 APEM 13,50 0,531 13,50 0,531 2,8x0,8 TAB [0.110x0.031] 1,25 0,049 9,00 0,354 SQ SOLDER LUG/FASTONS M12x0,75 FLUSH BEZEL 200,00+/-10 [7.874+/-0.393] www.apem.com 3 Q SERIES O12mm (.472") Panel Mount LED Indicators Prominent & Recessed Bezel Overview STANDARD OPTIONS The Q12 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 12 P 1 B XX G 12 E SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING 1 = Solder Lug/ Fastons (2.8 x 0.8) C = Bright Chrome XX = Fixed Light R = Red 02 = no resistor* (Blank) = Unsealed B = Black Chrome G = Green 06 = 6VDC E = IP67 2 = Pins G = Satin Grey KK = Flashing Light (12 - 28VDC) Y = Yellow 12 = 12VDC B = Blue 12A = 12VAC/DC W = White 24 = 24VDC O = Orange 24A = 24VAC/DC Q 12 = O12mm P = Prominent R = Recessed 3 = Wires 4 = Rear epoxy Pins YY = Bi-color ZZ = Tri-color 5 = Rear epoxy Wires 28 = 28VDC 6 = Short body Pins 7 = Short body Wires HR = Hyper Bright Red 28A = 28VAC/DC HG = Hyper Bright Green 110 = 110VAC HY = Hyper Bright Yellow 220 = 220VAC HO = Hyper Bright Orange SR = Super Bright Red SG = Super Bright Green SY = Super Bright Yellow SB = Super Bright Blue Example Q12P7GXXG12E O12mm, prominent bezel, short body wires, satin chrome finish, fixed light, green, 12VDC LED, IP67 panel sealed SW = Super Bright White SO = Super Bright Orange RG = Red/Green RY = Red/Yellow GY = Green/Yellow RYG = Red/Yellow/Green * Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * Bi-color LEDs, by connecting the gold Faston (+) one color is produced, by reversing the supply voltage another color is produced - Bi-colors are available up to 28VDC * Take care when soldering to the Faston terminals (recommended solder temperature 300C - 3 sec) * Max voltage for pins and wires is 28V * Maximum panel thickness 7mm * Tri-color are not available with terminal option 1 * Tri-colors are only available behind panel epoxy sealed with wires (option 5) or pins (option 4) * 110VAC and 220VAC, short body terminal options, 5, 6 and 7 please consult the factory * We recommend using Hyperbright or Superbright LEDs for use at 110VAC and 220VAC * The Tri-color LED has red and green LEDs when both are connected yellow is produced * Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-) * Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode * Tri-color pins are center (-) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red * = For resistorless versions (02) please refer to the forward voltage on page 1 APEM www.apem.com 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: Q12P1BXXB110E Q12P1BXXB12E Q12P1BXXB24E Q12P1BXXG110E Q12P1BXXG12E Q12P1BXXG24E Q12P1BXXR110E Q12P1BXXR12E Q12P1BXXR24E Q12P1BXXW110E Q12P1BXXW12E Q12P1BXXW24E Q12P1BXXY110E Q12P1BXXY12E Q12P1BXXY24E Q12P1CXXB110E Q12P1CXXB12E Q12P1CXXB24E Q12P1CXXG110E Q12P1CXXG12E Q12P1CXXG24E Q12P1CXXR110E Q12P1CXXR12E Q12P1CXXR24E Q12P1CXXW110E Q12P1CXXW12E Q12P1CXXW24E Q12P1CXXY110E Q12P1CXXY12E Q12P1CXXY24E Q12P1BXXY02E Q12P1GXXSG24E Q12P1GXXSY24E Q12P3BKKR24E Q12P1BXXG02E Q12P1BXXSG220E Q12P7CXXR12E Q12P1BXXSG28E Q12P1CXXHR24E Q12P3BXXB24E Q12P3BXXG24E Q12P3CXXG28E Q12P3CXXHR24E Q12P5CXXW24E Q12P5CXXY02E Q12P7BXXSB12E Q12P7BYYRG06E Q12R5BXXSG02E Q12P3BXXHY12E Q12P3BXXR12E Q12P3BYYRG24E Q12P3CXXR12E Q12P3GYYRG06E Q12P5CXXG02E Q12P1BXXSW110E Q12P1BXXSW24E Q12P1BXXY36E Q12P1CXXG220E Q12P1CXXHR12E Q12P3BKKG24 Q12P1BXXHG12E Q12P1BXXHR12E Q12P1BXXHY12E Q12P1BXXR220E Q12P1BXXSB110E Q12P1BXXSR110E Q12P7BXXSG12E Q12P7BXXSR12E Q12P7BXXSY12E Q12P1BXXG06E Q12P1BXXG220E Q12P1BXXG28EX0284 Q12P1CXXG24AE