1
www.apem.com
Q SERIES Ø12mm (.472") Panel Mount LED Indicators
Distinctive features and specification
Features
• 12mm panel mounting LED indicator
• 8mm colored diffused epoxy lens or 8mm water clear super bright LEDs
•
•
Prominent recessed and flush bezel style
•
2VDC – 220VAC
•
(2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations
•
IP67 sealing option (EN60529)
•
Supplied with fixing nut and spring washer
NB: UL Recognized Component
Ø 12.00 +0.15/-0.0
PANEL CUTOUT
Standard LED Intensity Prominent and Recessed Flush Forward Voltage
HE Red 350mcd 2.0V
Green 60mcd 2.2V
Yellow 50mcd 2.1V
Blue 800mcd 3.3V
White
1,200mcd
3.3V
Orange
100mcd
2.0V
Bi-color (Typical) (Red/Green)
20/10mcd
2.0V/2.2V
Tri-color (Typical) (Red/Green/Yellow)
80/15/13mcd
2.0V/2.2V/2.1V
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright LED Prominent and Recessed Forward Voltage
HE Red
2.2V
Green
8,000mcd
3,000mcd
3.3V
Yellow
1,100mcd 2.3V
Blue
1,500mcd 3.3V
White
1,200mcd 3.3V
Orange
2,000mcd 2.2V
Hyper Bright LED Prominent and Recessed Forward Voltage
HE Red
1,120mcd
1,120mcd
1,120mcd
1,560mcd
2.0V
Green
3.3V
Yellow
White 3.1V
2,180mcd
Blue 3.1V
330mcd
2.0V
Orange 2.2V
Luminous intensity will be reduced with lower operating current.
Max Reverse Voltage: 5V
Viewing Angle: 30–100° (dependant on model)
Life Expectancy: 100,000 hours
Temperature Range: –40 to +85°C
TECHNICAL SPECIFICATIONS
Voltage Operating Voltage Operating Current
(Min to Max) (Typical All Types)
02 (No Resistor) 1.8 to 3.3VDC 20mA max*
6VDC 5.4 to 6.6VDC 20mA
12VDC 10.8 to 13.2VDC 20mA
24VDC 21.6 to 26.4VDC 20mA
28VDC 25.2 to 30.8VDC 20mA
110VAC 99 to 121VAC 6mA
220VAC 207 to 253VAC 3mA
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
Luminous intensities and color shades of white LEDs may vary within a batch.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
APEM
Torque: 75cNm
Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
(operating & storage)
Flush
Flush
Q12_VOY1704R3US
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15,00 0,591 AF 2,00 0,079
M12 x 0,75 THREAD
2www.apem.com APEM
Q SERIES Ø12mm (.472") Panel Mount LED Indicators
Technical Drawings
PROMINENT BEZEL
REAR EPOXY PINS
PINS
SHORT BODY WIRESSHORT BODY PINSREAR EPOXY WIRES
WIRES
SOLDER LUG/FASTONS
Drawing
4,50 0,177
31,75 1,250
9,35 0,368
10,00 0,394
13,50
0,531
M12x0,75 2,8x0,8[0.11x0,031]
8,75 0,344
13,50
0,531
4,50 0,177
8,75 0,344
27,50 1,083
4,50 0,177
6,00 0,236
0,50 0,020
2,00 [0,078]
2,00 [0,078]
M12x0,75
13,50
0,531
4,50 0,177
8,75 0,344
27,50 1,083
M12x0,75
200,0+/-10
[7,874+/-0,393]
13,50
0,531
4,50 0,177
8,75 0,344
13,50 0,531
18,50 0,728
20,00 0,787
0,50 0,020
1,25 0,049
1,25 0,049
M12x0,75
13,50
0,531
4,50 0,177
8,75 0,344
200,0+/-10
[7,874+/-0,393]
M12x0,75
13,50 0,531
4,50 0,177
16,00 0,630
16,00 0,630
17,50 0,689
0,50 0,020
1,25 0,001
1,25 0,049
M12x0,75
13,50
0,531
8,75 0,344
13,50
0,531
4,50 0,177
16,00 [0,629]
200,0+/-10
[7,874+/-0,393]
M12x0,75
8,75 0,344
REAR EPOXY PINS
PINS
SHORT BODY WIRESSHORT BODY PINSREAR EPOXY WIRES
WIRES
SOLDER LUG/FASTONS
RECESSED BEZEL
13,50
0,531
5,00 ,197
8,75 0,344
31,75 1,250
9,35 0,368
10,00 0,394
2,8x0,8[0,11x0,031]
M12x0,75
13,50
0,531
5,00 0,197
8,75 0,344
27,50 1,083
4,50 0,177
6,00 0,236
0,50
0,020 SQ
2,50 0,098
1,25 0,049
M12x0,75
5,00 0,197
8,75 0,344
13,50 0,531
18,50 0,728
20,00 0,787
M12x0,75
13,50
0,531
0,50
0,020 SQ
1,25 0,049
2,50 0,098
13,50
0,531
5,00 0,197
8,75 0,344
13,50 0,531
200,00+/-10
[7,874+/-0,393]
M12x0,75
13,50
0,531
M12x0,75
0,50 0,020
2,50 0,098
1,25 0,049
5,00 0,197
8,75 0,344
16,00 0,630
16,00 0,630
17,50 0,689
13,50
0,531
5,00 0,197
8,75 0,344
16,00 0,630
200,00+/-10
[7,874+/-0,393]
M12x0,75
200,00+/-10
[7.874x0.393]
5,00 0,197
8,75 0,344
27,50 1,083
13,50
0,531
M12x0,75
www.apem.com
4APEM
Q SERIES Ø12mm (.472") Panel Mount LED Indicators
Flush Bezel Overview
STANDARD OPTIONS
Q 12 F 5 B XX G 12 E
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternative voltage consult APEM
•
•
Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec)
•
Max voltage for pins and wires is 28V
•
Maximum panel thickness 7mm
110VAC and 220VAC only available with solder lug/Faston terminals
Q
Example Q12F5GXXR12E
Ø12mm, flush bezel, epoxy wires,
bright chrome finish, fixed light,
red, 12VDC LED, IP67 panel sealed
1 = Solder Lug/
Fastons
(2.8 x 0.8)
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
C = Bright Chrome
B = Black Chrome
G = Satin Grey
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
B = Blue
W = White
HO = Hyper Bright Orange
02 = no resistor*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
SERIES MOUNTING
HOLE
12 = Ø12mm F = Flush
BEZEL
STYLE TERMINALS BEZEL FINISH TYPE OF
ILLUMINATION LED COLOR VOLTAGE SEALING
The Q12 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
* = For resistorless versions (02) please refer to the forward voltage on page 1
www.apem.com
Technical Drawings
3
www.apem.com
APEM
Q SERIES Ø12mm (.472") Panel Mount LED Indicators
FLUSH BEZELREAR EPOXY PINS
REAR EPOXY WIRES
SOLDER LUG/FASTONS
M12x0,75
13,50
0,531
1,25 0,049
9,00 0,354
32,65 1,285
9,35 0,368
10,00 0,394
2,8x0,8 TAB
[0.110x0.031]
M12x0,75
0,50 0,020 SQ
2,54 0,100
1,27 0,050
13,50
0,531
1,25 0,049
9,00 0,354
14,40 0,567
17,50 0,689
19,00 0,748
M12x0,75
13,50
0,531
1,25 0,049
9,00 0,354
14,40 0,567
200,00+/-10
[7.874+/-0.393]
www.apem.com 5
APEM
Q SERIES Ø12mm (.472") Panel Mount LED Indicators
Prominent & Recessed Bezel Overview
STANDARD OPTIONS
Q 12 P 1 B XX G 12 E
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 24AWG UL1061, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
•
•
Bi-color LEDs, by connecting the gold Faston (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC
•
Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec)
•
Max voltage for pins and wires is 28V
•
Maximum panel thickness 7mm
Tri-color are not available with terminal option 1
• Tri-colors are only available behind panel epoxy sealed with wires (option 5) or pins (option 4)
• 110VAC and 220VAC, short body terminal options, 5, 6 and 7 please consult the factory
• We recommend using Hyperbright or Superbright LEDs for use at 110VAC and 220VAC
Q
Example Q12P7GXXG12E
Ø12mm, prominent bezel, short body wires,
satin chrome finish, fixed light,
green, 12VDC LED, IP67 panel sealed
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
6 = Short body
Pins
7 = Short body
Wires
C = Bright Chrome
B = Black Chrome
G = Satin Grey
R = Red
G = Green
Y = Yellow
B = Blue
W = White
O = Orange
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
SO = Super Bright Orange
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
02 = no resistor*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
(Blank) = Unsealed
E = IP67
XX = Fixed Light
KK = Flashing Light
(12 - 28VDC)
YY = Bi-color
ZZ = Tri-color
SERIES MOUNTING
HOLE
12 = Ø12mm P = Prominent
R = Recessed
BEZEL
STYLE TERMINALS BEZEL FINISH TYPE OF
ILLUMINATION LED COLOR VOLTAGE SEALING
The Q12 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
* = For resistorless versions (02) please refer to the forward voltage on page 1
•The Tri-color LED has red and green LEDs when both are connected yellow is produced
•Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-)
Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode
•Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red
•
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
Q12P1BXXB110E Q12P1BXXB12E Q12P1BXXB24E Q12P1BXXG110E Q12P1BXXG12E Q12P1BXXG24E
Q12P1BXXR110E Q12P1BXXR12E Q12P1BXXR24E Q12P1BXXW110E Q12P1BXXW12E Q12P1BXXW24E
Q12P1BXXY110E Q12P1BXXY12E Q12P1BXXY24E Q12P1CXXB110E Q12P1CXXB12E Q12P1CXXB24E
Q12P1CXXG110E Q12P1CXXG12E Q12P1CXXG24E Q12P1CXXR110E Q12P1CXXR12E Q12P1CXXR24E
Q12P1CXXW110E Q12P1CXXW12E Q12P1CXXW24E Q12P1CXXY110E Q12P1CXXY12E Q12P1CXXY24E
Q12P1BXXY02E Q12P1GXXSG24E Q12P1GXXSY24E Q12P3BKKR24E Q12P1BXXG02E Q12P1BXXSG220E
Q12P7CXXR12E Q12P1BXXSG28E Q12P1CXXHR24E Q12P3BXXB24E Q12P3BXXG24E Q12P3CXXG28E
Q12P3CXXHR24E Q12P5CXXW24E Q12P5CXXY02E Q12P7BXXSB12E Q12P7BYYRG06E Q12R5BXXSG02E
Q12P3BXXHY12E Q12P3BXXR12E Q12P3BYYRG24E Q12P3CXXR12E Q12P3GYYRG06E Q12P5CXXG02E
Q12P1BXXSW110E Q12P1BXXSW24E Q12P1BXXY36E Q12P1CXXG220E Q12P1CXXHR12E Q12P3BKKG24
Q12P1BXXHG12E Q12P1BXXHR12E Q12P1BXXHY12E Q12P1BXXR220E Q12P1BXXSB110E
Q12P1BXXSR110E Q12P7BXXSG12E Q12P7BXXSR12E Q12P7BXXSY12E Q12P1BXXG06E Q12P1BXXG220E
Q12P1BXXG28EX0284 Q12P1CXXG24AE
