© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1
One WORLD One Brand One Strategy One Focus One Team One KEMET
Benets
Established reliability options
Taped and reeled per EIA 481–D
Symmetrical, compliant terminations
Laser-marked case
100% surge current test available on all case sizes
Qualied to MILPRF-55365/11, Style CWR19
Termination options B, C, H, K
Weibull failure options B, C, and D
Exponential failure rates M, P, R, S
Voltage rating of 4 – 50 VDC
Operating temperature range of -55˚C to +125˚C
Applications
Typical applications include decoupling and ltering in Military and
aerospace applications requiring CWR19 devices.
Overview
The KEMET T419 series is approved to MIL–PRF–55365/11
(CWR19), with Weibull failure rates of B level (0.1% failures per
1,000 hours), C level (0.01% failures per 1,000 hours), or D level
(0.001% failures per 1,000 hours). This CWR19 product is a
precision-molded device, with compliant terminations and indelible
laser marking. Tape and reeling per EIA 481–D is standard.
MILPRF (CWR Style) Established Reliability
T419 Series CWR19 Style MIL–PRF–55365/11
Environmental Compliance
RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn Solder.
SPICE
For a detailed analysis of specic part numbers, please visit kemet.com for a free download of KEMET’s SPICE software. The KEMET
SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency,
temperature, ripple, and DC bias conditions.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 22
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Ordering Information
T419 A225 K004 A H 4251
Capacitor
Class Series Case Size Capacitance
Code (pF)
Capacitance
Tolerance Voltage Failure Rate/Design Lead Material Surge
T =
Tantalum
CWR19
Established
Reliability
A = 1005
B = 1505
C = 2005
D = 1510
E = 2010
F = 2214
G = 2711
H = 2915
X = 2824
First two digits
represent
signicant gures.
Third digit species
number of zeros.
J = ±5%
K = ±10%
M = ±20%
004 = 4 V
006 = 6.3 V
010 = 10 V
015 = 15 V
020 = 20 V
025 = 25 V
035 = 35 V
050 = 50 V
Weibull
A = non-ER
B = (0.1%/1,000 hours)
C = (0.01%/1,000 hours)
D =(0.001%/1,000 hours)
Exponential
M = (1.0%/1,000 hours)
P = (0.1%/1,000 hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
C = Hot Solder
Dipped
H = Standard Solder
Coated (SnPb 5% Pb
minimum)
B = Gold Plated
K = Solder Fused
4250= 25ºC after Weibull
4251 = -5C and 85ºC
after Weibull
4252 = -5C and 8C
before Weibull
Defense MIL–PRF–55365/11 Ordering Information
CWR19 K H 225 KCD A
Capacitor Style Voltage Termination Finish Capacitance Code (pF) Capacitance
Tolerance Reliability Level Case Code Surge Current Option
Per MIL–PRF–
55365/11
C = 4 V
D = 6 V
F = 10 V
H = 15 V
J = 20 V
K = 25 V
M = 35 V
N = 50 V
B = Gold Plated
C = Hot solder
dipped
H = Solder Plated
K = Solder fused
First two digits
represent signicant
gures. Third digit
species number of
zeros.
J = ±5%
K = ±10%
M = ±20%
Weibull
A = non-ER
B = (0.1%/1,000 hours)
C = (0.01%/1,000 hours)
D =(0.001%/1,000 hours)
Exponential
M = (1.0%/1,000 hours)
P = (0.1%/1,000 hours)
R = (0.01%/1,000 hours)
S =(0.001%/1,000 hours)
A, B, C, D, E,
F, G, H, X
A = +25°C after
Weibull
B = -55°C +85°C after
Weibull
C = -55°C +85°C
before Weibull
Z = None
Performance Characteristics
Item Performance Characteristics
Operating Temperature -55°C to 125°C
Rated Capacitance Range 0.33 – 330 µF @ 120 Hz/25°C
Capacitance Tolerance J Tolerance (5%), K Tolerance (10%), M Tolerance (20%)
Rated Voltage Range 4 – 50 V
DF (120 Hz) Refer to Part Number Electrical Specication Table
ESR (100 kHz) Refer to Part Number Electrical Specication Table
Leakage Current ≤ 0.01 CV (µA) at Rated Voltage after 5 minutes
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 33
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Qualication
Test Condition Characteristics
Endurance 85°C @ rated voltage, 2,000 hours
125°C @ 2/3 rated voltage, 2,000 hours
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Storage Life 125°C @ 0 Volts, 2,000 hours
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Thermal Shock MIL–STD–202, Method 107, Condition B, mounted,
-55°C to 125°C, 1,000 cycles
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within 1.25 x initial limit
ESR Within initial limits
Temperature Stability
Extreme temperature exposure at a
succession of continuous steps at +25°C,
-55°C, +25°C, +85°C, +125°C, +25°C
+2C -55°C +85°C +125°C
Δ C/C IL* ±10% ±10% ±20%
DF IL IL 1.5 x IL 1.5 x IL
DCL IL n/a 10 x IL 12 x IL
Surge Voltage 25°C and 85°C, 1.32 x rated voltage 1,000 cycles
(125°C, 1.2 x rated voltage)
Δ C/C Within ±5% of initial value
DF Within initial limits
DCL Within initial limits
ESR Within initial limits
Mechanical Shock/Vibration
MILSTD–202, Method 213, Condition I, 100 G Peak
MILSTD–202, Method 204, Condition D, 10 Hz to 2,000 Hz,
20 G peak
Δ C/C Within ±10% of initial value
DF Within initial limits
DCL Within initial limits
Additional qualication tests
per MILPRF–55365/11 Please contact KEMET for more information.
*IL = Initial limit
Certication
MIL–PRF–55365/11
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 44
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Electrical Characteristics
0
1
10
100
1,000
100 1,000 10,000 100,000 1,000,000 10,000,000
Capacitance (µF)
Frequency (Hz)
T419D106/15
T419F336/15
T419H107/15
Capacitance vs. Frequency
0.1
1
10
100
1000
100 1,000 10,000 100,000 1,000,000 10,000,000
Impedance, ESR (Ohms)
Frequency (Hz)
T419D106/15_IMP
T419F336/15_IMP
T419H107/15_IMP
T419D106/15_ESR
T419F336/15_ESR
T419F107/15_ESR
ESR vs. Frequency
Dimensions – Millimeters (Inches)
Metric will govern
Case Size Component
KEMET L* +/- 0.38 (.015) W* +/- 0.38 (.015) H* +/- 0.38 (.015) P +.025(.010), -0.13(.005) W2
A 2.54 (.100) 1.27 (.050) 1.27 (.050) 0.76 (.030) 1.27 +/- 0.13 (.050 +/- .005)
B 3.81 (.150) 1.27 (.050) 1.27 (.050) 0.76 (.030) 1.27 +/- 0.13 (.050 +/- .005)
C5.08 (.200) 1.27 (.050) 1.27 (.050) 0.76 (.030) 1.27 +/- 0.13 (.050 +/- .005)
D 3.81 (.150) 2.54 (.100) 1.27 (.050) 0.76 (.030) 2.41 +.13, -.25 (.095 +.005, -.010)
E5.08 (.200) 2.54 (.100) 1.27 (.050) 0.76 (.030) 2.41 +.13, -.25 (.095 +.005, -.010)
F 5.59 (.220) 3.43 (.135) 1.78 (.070) 0.76 (.030) 3.30 +/- 0.13 (.130 +/- .005)
G 6.73 (.265) 2.79 (.110) 2.79 (.110) 1.27 (.050) 2.67 +/- 0.13 (.105 +/- .005)
H 7.24 (.285) 3.81 (.150) 2.79 (.110) 1.27 (.050) 3.68 +.013, -0.51 (.145 + .005, - .020)
X6.93 (.273) 5.41 (.213) 2.74 (.108) 1.19 (.047) 3.05 +/- 0.13 (.120 +/- .005)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 55
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours), D (0.001%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = -55°C +85°C after Weibull, or 4252 = -55°C +85°C before Weibull. Designates
Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = -55°C +85°C after Weibull, C = -55°C +85°C before Weibull or Z = None. Designates Surge
current option.
Refer to Ordering Information for additional detail.
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
MIL–C–55365/11
Part Number
DC
Leakage DF ESR Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
(See below for
part options)
µA @ +20
º
C
Max/5 Min
% @ 20ºC 120
Hz Max
Ω @ +20
º
C
100kHz Max
Reow Temperature
≤ 260ºC
43.3 A/1005 T419A335(1)004(2)(3)(4) CWR19C(3)335(1)(2)A(5) 1.0 6.0 12.0 1
44.7 A/1005 T419A475(1)004(2)(3)(4) CWR19C(3)475(1)(2)A(5) 1.0 6.0 12.0 1
46.8 A/1005 T419A685(1)004(2)(3)(4) CWR19C(3)685(1)(2)A(5) 1.0 6.0 12.0 1
410 B/1505 T419B106(1)004(2)(3)(4) CWR19C(3)106(1)(2)B(5) 1.0 8.0 8.0 1
415 B/1505 T419B156(1)004(2)(3)(4) CWR19C(3)156(1)(2)B(5) 1.0 8.0 8.0 1
422 B/1505 T419B226(1)004(2)(3)(4) CWR19C(3)226(1)(2)B(5) 1.0 8.0 8.0 1
422 D/1510 T419D226(1)004(2)(3)(4) CWR19C(3)226(1)(2)D(5) 1.0 8.0 4.0 1
433 D/1510 T419D336(1)004(2)(3)(4) CWR19C(3)336(1)(2)D(5) 2.0 8.0 4.0 1
433 E/2010 T419E336(1)004(2)(3)(4) CWR19C(3)336(1)(2)E(5) 2.0 8.0 3.0 1
447 E/2010 T419E476(1)004(2)(3)(4) CWR19C(3)476(1)(2)E(5) 2.0 8.0 3.0 1
468 E/2010 T419E686(1)004(2)(3)(4) CWR19C(3)686(1)(2)E(5) 3.0 8.0 3.0 1
4100 F/2214 T419F107(1)004(2)(3)(4) CWR19C(3)107(1)(2)F(5) 4.0 10.0 2.0 1
4150 G/2711 T419G157(1)004(2)(3)(4) CWR19C(3)157(1)(2)G(5) 6.0 10.0 1.0 1
4220 H/2915 T419H227(1)004(2)(3)(4) CWR19C(3)227(1)(2)H(5) 8.0 10.0 1.0 1
4330 H/2915 T419H337(1)004(2)(3)(4) CWR19C(3)337(1)(2)H(5) 10.0 10.0 0.9 1
63.3 A/1005 T419A335(1)006(2)(3)(4) CWR19D(3)335(1)(2)A(5) 1.0 6.0 12.0 1
64.7 A/1005 T419A475(1)006(2)(3)(4) CWR19D(3)475(1)(2)A(5) 1.0 6.0 12.0 1
66.8 B/1505 T419B685(1)006(2)(3)(4) CWR19D(3)685(1)(2)B(5) 1.0 6.0 8.0 1
610 B/1505 T419B106(1)006(2)(3)(4) CWR19D(3)106(1)(2)B(5) 1.0 6.0 8.0 1
615 B/1505 T419B156(1)006(2)(3)(4) CWR19D(3)156(1)(2)B(5) 1.0 8.0 8.0 1
615 D/1510 T419D156(1)006(2)(3)(4) CWR19D(3)156(1)(2)D(5) 1.0 8.0 5.0 1
615 E/2010 T419E156(1)006(2)(3)(4) CWR19D(3)156(1)(2)E(5) 1.0 8.0 3.0 1
622 D/1510 T419D226(1)006(2)(3)(4) CWR19D(3)226(1)(2)D(5) 1.0 6.0 5.0 1
622 E/2010 T419E226(1)006(2)(3)(4) CWR19D(3)226(1)(2)E(5) 2.0 8.0 3.5 1
633 E/2010 T419E336(1)006(2)(3)(4) CWR19D(3)336(1)(2)E(5) 2.0 6.0 3.5 1
647 F/2214 T419F476(1)006(2)(3)(4) CWR19D(3)476(1)(2)F(5) 2.8 8.0 3.5 1
668 F/2214 T419F686(1)006(2)(3)(4) CWR19D(3)686(1)(2)F(5) 4.0 10.0 1.5 1
668 G/2711 T419G686(1)006(2)(3)(4) CWR19D(3)686(1)(2)G(5) 4.0 10.0 1.0 1
6100 G/2711 T419G107(1)006(2)(3)(4) CWR19D(3)107(1)(2)G(5) 6.0 10.0 1.1 1
6150 G/2711 T419G157(1)006(2)(3)(4) CWR19D(3)157(1)(2)G(5) 10.0 10.0 1.1 1
6220 H/2915 T419H227(1)006(2)(3)(4) CWR19D(3)227(1)(2)H(5) 10.0 10.0 0.9 1
6330 H/2915 T419H337(1)006(2)(3)(4) CWR19D(3)337(1)(2)H(5) 20.0 10.0 0.9 1
10 2.2 A/1005 T419A225(1)010(2)(3)(4) CWR19F(3)225(1)(2)A(5) 1.0 6.0 12.0 1
10 3.3 A/1005 T419A335(1)010(2)(3)(4) CWR19F(3)335(1)(2)A(5) 1.0 6.0 12.0 1
10 4.7 B/1505 T419B475(1)010(2)(3)(4) CWR19F(3)475(1)(2)B(5) 1.0 6.0 8.0 1
10 4.7 C/2005 T419C475(1)010(2)(3)(4) CWR19F(3)475(1)(2)C(5) 1.0 6.0 5.5 1
10 6.8 B/1505 T419B685(1)010(2)(3)(4) CWR19F(3)685(1)(2)B(5) 1.0 6.0 8.0 1
10 6.8 C/2005 T419C685(1)010(2)(3)(4) CWR19F(3)685(1)(2)C(5) 1.0 6.0 5.5 1
10 6.8 D/1510 T419D685(1)010(2)(3)(4) CWR19F(3)685(1)(2)D(5) 1.0 6.0 5.0 1
10 10 B/1505 T419B106(1)010(2)(3)(4) CWR19F(3)106(1)(2)B(5) 1.0 8.0 8.0 1
10 10 C/2005 T419C106(1)010(2)(3)(4) CWR19F(3)106(1)(2)C(5) 1.0 6.0 5.5 1
10 10 D/1510 T419D106(1)010(2)(3)(4) CWR19F(3)106(1)(2)D(5) 1.0 6.0 4.0 1
10 10 E/2010 T419E106(1)010(2)(3)(4) CWR19F(3)106(1)(2)E(5) 1.0 6.0 3.5 1
10 15 D/1510 T419D156(1)010(2)(3)(4) CWR19F(3)156(1)(2)D(5) 2.0 6.0 5.0 1
10 15 E/2010 T419E156(1)010(2)(3)(4) CWR19F(3)156(1)(2)E(5) 2.0 8.0 3.0 1
10 22 E/2010 T419E226(1)010(2)(3)(4) CWR19F(3)226(1)(2)E(5) 3.0 8.0 2.0 1
10 33 F/2214 T419F336(1)010(2)(3)(4) CWR19F(3)336(1)(2)F(5) 3.0 8.0 1.5 1
10 47 F/2214 T419F476(1)010(2)(3)(4) CWR19F(3)476(1)(2)F(5) 4.0 10.0 1.5 1
10 47 G/2711 T419G476(1)010(2)(3)(4) CWR19F(3)476(1)(2)G(5) 4.0 10.0 1.0 1
VDC µF KEMET/EIA (See below for
part options)
(See below for
part options)
µA @ +20ºC
Max/5 Min
% @ 20ºC 120
Hz Max
Ω @ +20ºC
100kHz Max
Reow Temperature
≤ 260ºC
Rated
Voltage Rated Cap Case Code/
Case Size KEMET Part Number MIL–C–55365/11
Part Number
DC
Leakage DF ESR Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 66
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours), D (0.001%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = -55°C +85°C after Weibull, or 4252 = -55°C +85°C before Weibull. Designates
Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = -55°C +85°C after Weibull, C = -55°C +85°C before Weibull or Z = None. Designates Surge
current option.
Refer to Ordering Information for additional detail.
Table 1 – Ratings & Part Number Reference cont'd
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
MIL–C–55365/11
Part Number
DC
Leakage DF ESR Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
(See below for
part options)
µA @ +20
º
C
Max/5 Min
% @ 20ºC 120
Hz Max
Ω @ +20
º
C
100kHz Max
Reow Temperature
≤ 260ºC
10 68 G/2711 T419G686(1)010(2)(3)(4) CWR19F(3)686(1)(2)G(5) 6.0 10.0 1.1 1
10 100 G/2711 T419G107(1)010(2)(3)(4) CWR19F(3)107(1)(2)G(5) 10.0 10.0 1.1 1
10 100 H/2915 T419H107(1)010(2)(3)(4) CWR19F(3)107(1)(2)H(5) 10.0 10.0 0.9 1
10 150 H/2915 T419H157(1)010(2)(3)(4) CWR19F(3)157(1)(2)H(5) 15.0 10.0 0.9 1
10 150 X/2824 T419X157(1)010(2)(3)(4) CWR19F(3)157(1)(2)X(5) 15.0 10.0 0.9 1
10 220 H/2915 T419H227(1)010(2)(3)(4) CWR19F(3)227(1)(2)H(5) 20.0 10.0 0.9 1
15 1A/1005 T419A105(1)015(2)(3)(4) CWR19H(3)105(1)(2)A(5) 1.0 6.0 15.0 1
15 1.5 A/1005 T419A155(1)015(2)(3)(4) CWR19H(3)155(1)(2)A(5) 1.0 6.0 15.0 1
15 2.2 A/1005 T419A225(1)015(2)(3)(4) CWR19H(3)225(1)(2)A(5) 1.0 6.0 15.0 1
15 3.3 B/1505 T419B335(1)015(2)(3)(4) CWR19H(3)335(1)(2)B(5) 1.0 6.0 9.0 1
15 4.7 B/1505 T419B475(1)015(2)(3)(4) CWR19H(3)475(1)(2)B(5) 1.0 6.0 5.0 1
15 4.7 C/2005 T419C475(1)015(2)(3)(4) CWR19H(3)475(1)(2)C(5) 1.0 6.0 5.5 1
15 4.7 D/1510 T419D475(1)015(2)(3)(4) CWR19H(3)475(1)(2)D(5) 1.0 6.0 6.0 1
15 6.8 D/1510 T419D685(1)015(2)(3)(4) CWR19H(3)685(1)(2)D(5) 1.0 6.0 6.0 1
15 6.8 E/2010 T419E685(1)015(2)(3)(4) CWR19H(3)685(1)(2)E(5) 1.0 8.0 3.0 1
15 10 D/1510 T419D106(1)015(2)(3)(4) CWR19H(3)106(1)(2)D(5) 2.0 6.0 6.0 1
15 10 E/2010 T419E106(1)015(2)(3)(4) CWR19H(3)106(1)(2)E(5) 2.0 6.0 4.0 1
15 15 E/2010 T419E156(1)015(2)(3)(4) CWR19H(3)156(1)(2)E(5) 2.0 6.0 4.0 1
15 15 F/2214 T419F156(1)015(2)(3)(4) CWR19H(3)156(1)(2)F(5) 2.0 8.0 3.0 1
15 22 F/2214 T419F226(1)015(2)(3)(4) CWR19H(3)226(1)(2)F(5) 3.0 8.0 3.0 1
15 33 F/2214 T419F336(1)015(2)(3)(4) CWR19H(3)336(1)(2)F(5) 5.0 6.0 3.0 1
15 33 G/2711 T419G336(1)015(2)(3)(4) CWR19H(3)336(1)(2)G(5) 6.0 8.0 1.1 1
15 47 G/2711 T419G476(1)015(2)(3)(4) CWR19H(3)476(1)(2)G(5) 10.0 8.0 1.1 1
15 47 H/2915 T419H476(1)015(2)(3)(4) CWR19H(3)476(1)(2)H(5) 10.0 8.0 0.9 1
15 68 G/2711 T419G686(1)015(2)(3)(4) CWR19H(3)686(1)(2)G(5) 10.0 8.0 1.1 1
15 68 H/2915 T419H686(1)015(2)(3)(4) CWR19H(3)686(1)(2)H(5) 10.0 8.0 0.9 1
15 100 H/2915 T419H107(1)015(2)(3)(4) CWR19H(3)107(1)(2)H(5) 15.0 10.0 0.9 1
20 0.68 A/1005 T419A684(1)020(2)(3)(4) CWR19J(3)684(1)(2)A(5) 1.0 6.0 15.0 1
20 1A/1005 T419A105(1)020(2)(3)(4) CWR19J(3)105(1)(2)A(5) 1.0 6.0 15.0 1
20 1.5 B/1505 T419B155(1)020(2)(3)(4) CWR19J(3)155(1)(2)B(5) 1.0 6.0 9.0 1
20 2.2 B/1505 T419B225(1)020(2)(3)(4) CWR19J(3)225(1)(2)B(5) 1.0 6.0 9.0 1
20 3.3 D/1510 T419D335(1)020(2)(3)(4) CWR19J(3)335(1)(2)D(5) 1.0 6.0 6.0 1
20 4.7 E/2010 T419E475(1)020(2)(3)(4) CWR19J(3)475(1)(2)E(5) 1.0 6.0 6.0 1
20 6.8 E/2010 T419E685(1)020(2)(3)(4) CWR19J(3)685(1)(2)E(5) 2.0 6.0 5.0 1
20 10 E/2010 T419E106(1)020(2)(3)(4) CWR19J(3)106(1)(2)E(5) 2.0 6.0 5.0 1
20 10 F/2214 T419F106(1)020(2)(3)(4) CWR19J(3)106(1)(2)F(5) 2.0 6.0 3.0 1
20 15 F/2214 T419F156(1)020(2)(3)(4) CWR19J(3)156(1)(2)F(5) 3.0 6.0 3.0 1
20 22 G/2711 T419G226(1)020(2)(3)(4) CWR19J(3)226(1)(2)G(5) 4.0 6.0 2.5 1
20 33 H/2915 T419H336(1)020(2)(3)(4) CWR19J(3)336(1)(2)H(5) 6.0 8.0 0.9 1
20 47 H/2915 T419H476(1)020(2)(3)(4) CWR19J(3)476(1)(2)H(5) 10.0 8.0 0.9 1
20 47 X/2824 T419X476(1)020(2)(3)(4) CWR19J(3)476(1)(2)X(5) 10.0 8.0 0.9 1
25 0.47 A/1005 T419A474(1)025(2)(3)(4) CWR19K(3)474(1)(2)A(5) 1.0 6.0 15.0 1
25 1B/1505 T419B105(1)025(2)(3)(4) CWR19K(3)105(1)(2)B(5) 1.0 6.0 10.0 1
25 2.2 D/1510 T419D225(1)025(2)(3)(4) CWR19K(3)225(1)(2)D(5) 1.0 6.0 6.0 1
25 3.3 E/2010 T419E335(1)025(2)(3)(4) CWR19K(3)335(1)(2)E(5) 1.0 6.0 4.0 1
25 6.8 F/2214 T419F685(1)025(2)(3)(4) CWR19K(3)685(1)(2)F(5) 2.0 6.0 3.0 1
25 15 G/2711 T419G156(1)025(2)(3)(4) CWR19K(3)156(1)(2)G(5) 4.0 6.0 1.4 1
25 22 G/2711 T419G226(1)025(2)(3)(4) CWR19K(3)226(1)(2)G(5) 6.0 6.0 1.4 1
25 22 H/2915 T419H226(1)025(2)(3)(4) CWR19K(3)226(1)(2)H(5) 6.0 6.0 0.9 1
VDC µF KEMET/EIA (See below for
part options)
(See below for
part options)
µA @ +20
º
C
Max/5 Min
% @ 20ºC 120
Hz Max
Ω @ +20
º
C
100kHz Max
Reow Temperature
≤ 260ºC
Rated
Voltage Rated Cap Case Code/
Case Size KEMET Part Number MIL–C–55365/11
Part Number
DC
Leakage DF ESR Moisture
Sensitivity
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 77
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Rated
Voltage
Rated
Cap
Case Code/
Case Size
KEMET Part
Number
MIL–C–55365/11
Part Number
DC
Leakage DF ESR Moisture
Sensitivity
VDC µF KEMET/EIA (See below for
part options)
(See below for
part options)
µA @ +20
º
C
Max/5 Min
% @ 20ºC 120
Hz Max
Ω @ +20
º
C
100kHz Max
Reow Temperature
≤ 260ºC
25 22 X/2824 T419X226(1)025(2)(3)(4) CWR19K(3)226(1)(2)X(5) 6.0 6.0 0.9 1
25 33 H/2915 T419H336(1)025(2)(3)(4) CWR19K(3)336(1)(2)H(5) 10.0 8.0 0.9 1
25 33 X/2824 T419X336(1)025(2)(3)(4) CWR19K(3)336(1)(2)X(5) 10.0 8.0 0.9 1
35 0.33 A/1005 T419A334(1)035(2)(3)(4) CWR19M(3)334(1)(2)A(5) 1.0 6.0 22.0 1
35 6.8 G/2711 T419G685(1)035(2)(3)(4) CWR19M(3)685(1)(2)G(5) 3.0 6.0 1.5 1
35 10 H/2915 T419H106(1)035(2)(3)(4) CWR19M(3)106(1)(2)H(5) 4.0 8.0 0.9 1
35 15 X/2824 T419X156(1)035(2)(3)(4) CWR19M(3)156(1)(2)X(5) 6.0 6.0 0.9 1
VDC µF KEMET/EIA (See below for
part options)
(See below for
part options)
µA @ +20
º
C
Max/5 Min
% @ 20ºC 120
Hz Max
Ω @ +20
º
C
100kHz Max
Reow Temperature
≤ 260ºC
Rated
Voltage Rated Cap Case Code/
Case Size KEMET Part Number MIL–C–55365/11
Part Number
DC
Leakage DF ESR Moisture
Sensitivity
Table 1 – Ratings & Part Number Reference cont'd
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10%, or J for ±5%. Designates Capacitance tolerance.
(2) To complete KEMET/CWR part number, insert B (0.1%/1,000 Hours), C (0.01%/1,000 Hours), D (0.001%/1,000 Hours) or A = N/A. Designates Reliability Level.
(3) To complete KEMET/CWR part number, insert B = Gold Plated, C = Hot solder dipped, H = Solder plated or K = Solder Fused. Designates Termination Finish.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull, 4251 = -55°C +85°C after Weibull, or 4252 = -55°C +85°C before Weibull. Designates
Surge current option.
(5) To complete CWR part number, insert A = +25°C after Weibull, B = -55°C +85°C after Weibull, C = -55°C +85°C before Weibull or Z = None. Designates Surge
current option.
Refer to Ordering Information for additional detail.
Roll Over for
Order Info.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 88
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Recommended Voltage Derating Guidelines
0%
20%
40%
60%
80%
100%
120%
-55 25 85 125
% Working Voltage
% Change in Working DC Voltage
with Temperature
Temperature (ºC)
67%
33%
Recommended Maximum
Application Voltage (As %
of Rated Voltage)
Ripple Current/Ripple Voltage
T= Environmental Temperature
Using the P max of the device, the maximum allowable rms
ripple current or voltage may be determined.
I(max) = √P max/R
E(max) = √P max*R
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
Pmax = maximum power dissipation(watts)
R = ESR at specied frequency (ohms)
Case Code
Maximum Power Dissipation (P max)
mWatts @ 25°C with +20°C Rise
KEMET EIA
A1005 50
B1505 70
C2005 75
D1510 80
E2010 90
F2214 100
G2711 125
H2915 150
Temperature Compensation Multipliers
for Maximum Power Dissipation
≤ 25°C 85°C 12C
1.00 0.90 0.40
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 99
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Reverse Voltage
Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The
positive terminal is identied on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse
voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within
these limits.
Temperature Permissible Transient Reverse Voltage
25°C 15% of Rated Voltage
85°C 5% of Rated Voltage
12C 1% of Rated Voltage
Table 2 – Land Dimensions/Courtyard
KEMET Metric
Size
Code
Density Level A:
Maximum (Most)
Land Protrusion (mm)
Density Level B:
Median (Nominal)
Land Protrusion (mm)
Density Level C:
Minimum (Least)
Land Protrusion (mm)
Case EIA X Y CV1 V2 X Y CV1 V2 X Y CV1 V2
1005 1.45 2.15 1.20 5.60 2.70 1.35 1.85 1.05 4.50 2.20 1.25 1.55 0.90 3.60 1.90
B1505 1.45 2.30 1.75 6.80 2.70 1.35 1.90 1.65 5.70 2.20 1.25 1.55 1.55 4.90 1.92
C2005 1.45 2.30 2.40 8.10 2.70 1.35 1.90 2.30 7.0 0 2.20 1.25 1.55 2.15 6.10 1.90
D1510 2.60 2.30 1.75 6.80 4.00 2.45 1.90 1.65 5.70 3.50 2.35 1.55 1.55 4.90 3.20
E2010 2.60 2.30 2.40 8.10 4.00 2.45 1.90 2.30 7.00 3.50 2.35 1.55 2.15 6.10 3.20
F2214 3.50 2.30 2.65 8.60 4.90 3.35 1.90 2.55 7.50 4.40 3.25 1.55 2.45 6.70 4.10
G2711 2.85 2.80 2.95 9.70 4.20 2.75 2.40 2.85 8.60 3.70 2.65 2.05 2.75 7.80 3.40
H2915 3.85 2.80 3.20 10.20 5.20 3.75 2.40 3.10 9.10 4.70 3.65 2.05 3.00 8.30 4.40
X2824 3.25 2.75 3.10 10.00 6.80 3.10 2.35 3.00 8.90 6.30 3.00 1.95 2.90 8.00 6.00
Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reow solder processes.
Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reow solder processes.
Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualication
testing based on the conditions outlined in IPC Standard 7351 (IPC–7351).
1 Land pattern geometry is too small for silkscreen outline.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1010
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
MNO2 /Ta2O5/Ta Silver Adhesive
Carbon
Silver Paint Washer
Tantalum Wire Weld
Leadframe
(-Cathode) Leadframe
(+Anode)
Time
Temperature
T
smin
25° C to Peak
t
L
t
S
25
t
P
T
smax
T
L
T
P
Max Ramp Up Rate = 3° C/sec
Max Ramp Down Rate = 6° C/sec
Soldering Process
KEMET’s families of surface mount capacitors are compatible
with wave (single or dual), convection, IR or vapor phase reow
techniques. Preheating of these components is recommended
to avoid extreme thermal stress. KEMET’s recommended
prole conditions for convection and IR reow reect the prole
conditions of the IPC/J–STD–020D standard for moisture
sensitivity testing. The devices can safely withstand a maximum
of three reow passes at these conditions.
Note that although the X/7343–43 case size can withstand wave
soldering, the tall prole (4.3 mm maximum) dictates care in wave
process development.
Hand soldering should be performed with care due to the difculty
in process control. If performed, care should be taken to avoid
contact of the soldering iron to the molded case. The iron should
be used to heat the solder pad, applying solder between the pad
and the termination, until reow occurs. Once reow occurred, the
iron should be removed immediately. “Wiping” the edges of a chip
and heating the top surface is not recommended.
During typical reow operations, a slight darkening of the gold-
colored epoxy may be observed. This slight darkening is normal
and is not harmful to the product. Marking permanency is not
affected by this change.
Prole Feature SnPb Assembly Pb-Free Assembly
Preheat/Soak
Temperature Minimum (TSmin)10C 150°C
Temperature Maximum (TSmax)150°C 200°C
Time (ts) from Tsmin to Tsmax)60–120 seconds 60–120 seconds
Ramp-up Rate (TL to TP)3°C/seconds maximum 3°C/seconds maximum
Liquidous Temperature (TL)18C 217°C
Time Above Liquidous (tL)60–150 seconds 60–150 seconds
Peak Temperature (TP)
220°C*
235°C**
Time within 5°C of Maximum
Peak Temperature (t
P
)20 seconds maximum 30 seconds maximum
Ramp-down Rate (TP to TL)6°C/seconds maximum C/seconds maximum
Time 25°C to Peak Temperature 6 minutes maximum 8 minutes maximum
Note: All temperatures refer to the center of the package, measured on the
package body surface that is facing up during assembly reow.
*Case Size G, H and X
**Case Size A, B, C, D, E and F
Construction
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1111
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Capacitor Marking
KEMET
CWR 19
Style
Rated
Voltage
336
25 K
030
JPolarity
Indicator (+)
Picofarad Code
KEMET ID
PWC*
* 030 = 30th week of 2010
Storage
Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other
environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term
storage. In addition, packaging materials will be degraded by high temperature-reels may soften or warp, and tape peel force may
increase. KEMET recommends that maximum storage temperature not exceed 40ºC, and maximum storage humidity not exceed 60%
relative humidity. Temperature uctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of
chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years
of receipt.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1212
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Tape & Reel Packaging Information
KEMET’s molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in
accordance with EIA Standard 481–1: Embossed carrier taping of Surface Mount Components for Automatic Handling. This packaging
system is compatible with all tape fed automatic pick-and-place systems.
Table 3 – Packaging Quantity
Case Code Tape Width
(mm) 7" Reel* 13" Reel*
KEMET
EIA
R
2012-12
8
2,500
10,000
I
3216-10
8
3,000
12,000
S
3216-12
8
2,500
10,000
T
3528-12
8
2,500
10,000
M3528-15 82,000 8,000
U
6032-15
12
1,000
5,000
L
6032-19
12
1,000
5,000
W
7343-15
12
1,000
3,000
Z
7343-17
12
1,000
3,000
V
7343-20
12
1,000
3,000
A
3216-18
8
2,000
9,000
B
3528-21
8
2,000
8,000
C6032-28 12 500 3,000
D7343-31 12 500 2,500
Y
7343-40
12
500
2,000
X
7343-43
12
500
2,000
E/428P
7260-38
12
500
2,000
* No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1313
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Figure 1 – Embossed (Plastic) Carrier Tape Dimensions
Po
T
F
W
Center Lines of Cavity
Ao
Bo
User Direction of Unreeling
Cover Tape
Ko
B
1
is for tape feeder reference only,
including draft concentric about B
o
.
T
2
ØD
1
ØDo
B
1
S
1
T
1
E
1
E
2
P
1
P
2
Embossment
For cavity size,
see Note 1 Table 5
[10 pitches cumulative
tolerance on tape ± 0.2 mm]
Table 4 – Embossed (Plastic) Carrier Tape Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size D0
D
1
Minimum
Note 1
E1P0 P2
R Ref.
Note 2
S
1
Minimum
Note 3
T Maximum T1 Maximum
8 mm
1.5 +0.10/-0.0
(0.059 +0.004/-0.0)
1.0
(0.039)
1.75 ±0.10
(0.069 ±0.004)
4.0 ±0.10
(0.157 ±0.004)
2.0 ±0.05
(0.079 ±0.002)
25.0
(0.984)
0.600
(0.024)
0.600
(0.024)
0.100
(0.004)
12 mm 1.5
(0.059)
30
(1.181)
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size Pitch
B
1
Maximum
Note 4
E2 Minimum F P1 T2 Maximum W Maximum A0,B0 & K0
8 mm Single (4 mm)
4.35
(0.171)
6.25
(0.246)
3.5 ±0.05
(0.138 ±0.002)
4.0 ±0.10
(0.157 ±0.004)
2.5
(0.098)
8.3
(0.327)
Note 512 mm
Single (4 mm) &
Double (8 mm)
8.2
(0.323)
10.25
(0.404)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
12.3
(0.484)
16 mm Triple (12 mm)
12.1
(0.476)
14.25
(0.561)
5.5 ±0.05
(0.217 ±0.002)
8.0 ±0.10
(0.315 ±0.004)
4.6
(0.181)
16.3
(0.642)
1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and
hole location shall be applied independent of each other.
2. The tape with or without components shall pass around R without damage (see Figure 5).
3. If S1< 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481–D, paragraph 4.3, section b).
4. B1 dimension is a reference dimension for tape feeder clearance only.
5. The cavity de ned by A0, B0 and K0 shall surround the component with suf cient clearance that:
(a) the component does not protrude above the top surface of the carrier tape.
(b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed.
(c) rotation of the component is limited to 20° maximum for 8 and 12 mm tapes and 10° maximum for 16 mm tapes (see Figure 3).
(d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4).
See Addendum in EIA Standard 481–D for standards relating to more precise taping requirements.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1414
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Packaging Information Performance Notes
1. Cover Tape Break Force: 1.0 Kg minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width Peel Strength
8 mm 0.1 to 1.0 Newton (10 to 100 gf)
12 and 16 mm 0.1 to 1.3 Newton (10 to 130 gf)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180°
from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute.
3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA
Standards 556 and 624.
Figure 2 – Maximum Component Rotation
Ao
Bo
°
T
°
s
Maximum Component Rotation
Top View Maximum Component Rotation
Side View
Tape Maximum
Width (mm) Rotation (°
T)
8,12 20
16-200 10 Tape Maximum
Width (mm) Rotation ( °
S)
8,12 20
16-56 10
72-200 5
Typical Pocket Centerline
Typical Component Centerline
Figure 3 – Maximum Lateral Movement
0.5 mm maximum
0.5 mm maximum
8 mm & 12 mm Tape
1.0 mm maximum
1.0 mm maximum
16 mm Tape
Figure 4 – Bending Radius
RR
Bending
Radius
Embossed
Carrier Punched
Carrier
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1515
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Figure 5 – Reel Dimensions
AD(See Note)
Full Radius,
See Note
B(see Note)
Access Hole at
Slot Location
(Ø 40 mm min.)
If present,
tape slot in core
for tape start:
2.5 mm min. width x
10.0 mm min. depth
W3(Includes
flange distortion
at outer edge)
W2(Measured at hub)
W1(Measured at hub)
C
(Arbor hole
diameter)
Note: Drive spokes optional; if used, dimensions B and D shall apply.
N
Table 5 – Reel Dimensions
Metric will govern
Constant Dimensions — Millimeters (Inches)
Tape Size A B Minimum C D Minimum
8 mm
178 ±0.20
(7.008 ±0.008)
or
330 ±0.20
(13.000 ±0.008)
1.5
(0.059)
13.0 +0.5/-0.2
(0.521 +0.02/-0.008)
20.2
(0.795)
12 mm
16 mm
Variable Dimensions — Millimeters (Inches)
Tape Size N Minimum W1 W2 Maximum W3
8 mm
50
(1.969)
8.4 +1.5/-0.0
(0.331 +0.059/-0.0)
14.4
(0.567)
Shall accommodate tape width
without interference
12 mm
12.4 +2.0/-0.0
(0.488 +0.078/-0.0)
18.4
(0.724)
16 mm
16.4 +2.0/-0.0
(0.646 +0.078/-0.0)
22.4
(0.882)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1616
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Figure 6 – Tape Leader & Trailer Dimensions
Trailer
160 mm minimum,
Carrier Tape
END START
Round Sprocket Holes
Elongated Sprocket Holes
(32 mm tape and wider)
Top Cover Tape
Top Cover Tape
Punched Carrier
8 mm & 12 mm only
Embossed Carrier
Components
100 mm Min.
Leader
400 mm Minimum,
Figure 7 – Maximum Camber
Carrier Tape Round Sprocket Holes
1 mm maximum, either direction
Straight Edge
250 mm
Elongated sprocket holes
(32 mm & wider tapes)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1717
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
KEMET Corporation
World Headquarters
2835 KEMET Way
Simpsonville, SC 29681
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Corporate Of ces
Fort Lauderdale, FL
Tel: 954-766-2800
North America
Southeast
Lake Mary, FL
Tel: 407-855-8886
Northeast
Wilmington, MA
Tel: 978-658-1663
West Chester, PA
Tel: 610-692-4642
Central
Novi, MI
Tel: 248-994-1030
Carmel, IN
Tel: 317-706-6742
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Zapopan, Jalisco
Tel: 52-33-3123-2141
Europe
Southern Europe
Geneva, Switzerland
Tel: 41-22-715-0100
Paris, France
Tel: 33-1-4646-1009
Sasso Marconi, Italy
Tel: 39-051-939111
Milan, Italy
Tel: 39-02-57518176
Rome, Italy
Tel: 39-06-23231718
Madrid, Spain
Tel: 34-91-804-4303
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Dortmund, Germany
Tel: 49-2307-3619672
Kwidzyn, Poland
Tel: 48-55-279-7025
Northern Europe
Bishop’s Stortford, United Kingdom
Tel: 44-1279-757201
Weymouth, United Kingdom
Tel: 44-1305-830747
Coatbridge, Scotland
Tel: 44-1236-434455
Färjestaden, Sweden
Tel: 46-485-563934
Espoo, Finland
Tel: 358-9-5406-5000
Asia
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Shenzhen, China
Tel: 86-755-2518-1306
Beijing, China
Tel: 86-10-5829-1711
Shanghai, China
Tel: 86-21-6447-0707
Taipei, Taiwan
Tel: 886-2-27528585
Southeast Asia
Singapore
Tel: 65-6586-1900
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1818
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Other KEMET Resources
Tools
Resource Location
Con gure A Part: CapEdge http://capacitoredge.kemet.com
SPICE & FIT Software http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask
Product Information
Resource Location
Products http://www.kemet.com/products
Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers
RoHS Statement http://www.kemet.com/rohs
Quality Documents http://www.kemet.com/qualitydocuments
Product Request
Resource Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Contact
Resource Location
Website www.kemet.com
Contact Us http://www.kemet.com/contact
Investor Relations http://www.kemet.com/ir
Call Us 1-877-MyKEMET
Twitter http://twitter.com/kemetcapacitors
Disclaimer
All product speci cations, statements, information and data (collectively, the “Information”) are subject to change without notice.
All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we
speci cally disclaim – any warranty concerning suitability for a speci c customer application or use. This Information is intended for use only by customers who have the requisite
experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the
use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur.
Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or
redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2002_T419 • 5/8/2012 1919
MILPRF (CWR Style) Established Reliability – T419 Series CWR19 Style MIL–PRF–55365/11
Digitally signed by omjbfl1
DN: dc=com, dc=KEMET, ou=Sales, ou=USA, ou=FTLAUD, cn=omjbfl1
Date: 2012.05.31 11:11:59 -04'00'