5555 N.E. Moore Ct. Hillsboro, Oregon 97124-6421 Phone (503) 268-8000 FAX (503) 268-8347
Internet: http://www.latticesemi.com
ispLSI® 1032 Device Datasheet
September 2010
All Devices Discontinued!
Product Change Notifications (PCNs) have been issued to discontinue all devices in this
data sheet.
The original datasheet pages have not been modified and do not reflect those changes.
Please refer to the table below for reference PCN and current product status.
Product Line
Ordering Part Number
Product Status
Reference PCN
ispLSI 1032
ispLSI 1032-60LT
Discontinued
PCN#13-10
ispLSI 1032-80LT
ispLSI 1032-90LT
ispLSI 1032-60LTI
ispLSI 1032-60LJ
ispLSI 1032-80LJ
ispLSI 1032-90LJ
ispLSI 1032-60LJI
ispLSI 1016-60LH/883
5962-9476201MXC
PCN#05A-10
1
ispLSI® 1032
In-System Programmable High Density PLD
Features
• HIGH-DENSITY PROGRAMMABLE LOGIC
— High Speed Global Interconnect
— 6000 PLD Gates
— 64 I/O Pins, Eight Dedicated Inputs
— 192 Registers
— Wide Input Gating for Fast Counters, State
Machines, Address Decoders, etc.
— Small Logic Block Size for Fast Random Logic
— Security Cell Prevents Unauthorized Copying
• HIGH PERFORMANCE E2CMOS® TECHNOLOGY
— fmax = 90 MHz Maximum Operating Frequency
— fmax = 60 MHz for Industrial and Military/883 Devices
— tpd = 12 ns Propagation Delay
— TTL Compatible Inputs and Outputs
— Electrically Erasable and Reprogrammable
— Non-Volatile E2CMOS Technology
— 100% Tested
• IN-SYSTEM PROGRAMMABLE
— In-System Programmable™ (ISP™) 5-Volt Only
— Increased Manufacturing Yields, Reduced Time-to-
Market, and Improved Product Quality
— Reprogram Soldered Devices for Faster Prototyping
• COMBINES EASE OF USE AND THE FAST SYSTEM
SPEED OF PLDs WITH THE DENSITY AND FLEX-
IBILITY OF FIELD PROGRAMMABLE GATE ARRAYS
— Complete Programmable Device Can Combine Glue
Logic and Structured Designs
— Four Dedicated Clock Input Pins
— Synchronous and Asynchronous Clocks
— Flexible Pin Placement
— Optimized Global Routing Pool Provides Global
Interconnectivity
1032_08
Functional Block Diagram
Output Routing Pool
Output Routing Pool
D7 D6 D5 D4 D3 D2 D1 D0
B0 B1 B2 B3 B4 B5 B6 B7
A0
A1
A2
A3
A4
A5
A6
A7
C7
C6
C5
C4
C3
C2
C1
C0
Output Routing Pool
CLK
Output Routing Pool
Global Routing Pool (GRP)
Logic
Array
DQ
DQ
DQ
DQ
GLB
Description
The ispLSI 1032 is a High-Density Programmable Logic
Device containing 192 Registers, 64 Universal I/O pins,
eight Dedicated Input pins, four Dedicated Clock Input
pins and a Global Routing Pool (GRP). The GRP pro-
vides complete interconnectivity between all of these
elements. The ispLSI 1032 features 5-Volt in-system
programming and in-system diagnostic capabilities. It is
the first device which offers non-volatile reprogrammability
of the logic, as well as the interconnect to provide truly
reconfigurable systems.
The basic unit of logic on the ispLSI 1032 device is the
Generic Logic Block (GLB). The GLBs are labeled A0, A1
.. D7 (see figure 1). There are a total of 32 GLBs in the
ispLSI 1032 device. Each GLB has 18 inputs, a program-
mable AND/OR/XOR array, and four outputs which can
be configured to be either combinatorial or registered.
Inputs to the GLB come from the GRP and dedicated
inputs. All of the GLB outputs are brought back into the
GRP so that they can be connected to the inputs of any
other GLB on the device.
Copyright © 2002 Lattice Semiconductor Corp. All brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject
to change without notice.
LATTICE SEMICONDUCTOR CORP., 5555 Northeast Moore Ct., Hillsboro, Oregon 97124, U.S.A. January 2002
Tel. (503) 268-8000; 1-800-LATTICE; FAX (503) 268-8556; http://www.latticesemi.com
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
2
Functional Block Diagram
Figure 1. ispLSI 1032 Functional Block Diagram
The device also has 64 I/O cells, each of which is directly
connected to an I/O pin. Each I/O cell can be individually
programmed to be a combinatorial input, registered in-
put, latched input, output or bi-directional I/O pin with
3-state control. Additionally, all outputs are polarity se-
lectable, active high or active low. The signal levels are
TTL compatible voltages and the output drivers can
source 4 mA or sink 8 mA.
Eight GLBs, 16 I/O cells, two dedicated inputs and one
ORP are connected together to make a Megablock (see
figure 1). The outputs of the eight GLBs are connected to
a set of 16 universal I/O cells by the ORP. The I/O cells
within the Megablock also share a common Output
Enable (OE) signal. The ispLSI 1032 device contains four
of these Megablocks.
The GRP has as its inputs the outputs from all of the GLBs
and all of the inputs from the bi-directional I/O cells. All of
these signals are made available to the inputs of the
GLBs. Delays through the GRP have been equalized to
minimize timing skew.
Clocks in the ispLSI 1032 device are selected using the
Clock Distribution Network. Four dedicated clock pins
(Y0, Y1, Y2 and Y3) are brought into the distribution
network, and five clock outputs (CLK 0, CLK 1, CLK 2,
IOCLK 0 and IOCLK 1) are provided to route clocks to the
GLBs and I/O cells. The Clock Distribution Network can
also be driven from a special clock GLB (C0 on the ispLSI
1032 device). The logic of this GLB allows the user to
create an internal clock from a combination of internal
signals within the device.
Y
0
Y
1
Y
2
Y
3
I/O 0
I/O 1
I/O 2
I/O 3
IN 5
IN 4
I/O 6
I/O 7
I/O 8
I/O 9
I/O 10
I/O 11
I/O 12
I/O 13
I/O 14
I/O 15
I/O 47
I/O 46
I/O 45
I/O 44
I/O 43
I/O 42
I/O 41
I/O 40
I/O 39
I/O 38
I/O 37
I/O 36
I/O 35
I/O 34
I/O 33
I/O 32
SDI/IN 0
MODE/IN 1
I/O
62
I/O
63
I/O
61
I/O
60
I/O
59
I/O
58
I/O
57
I/O
56
I/O
55
I/O
54
I/O
53
I/O
52
I/O
51
I/O
50
I/O
49
I/O
48
IN
7
IN
6
I/O
17
I/O
16
I/O
18
I/O
19
I/O
20
I/O
21
I/O
22
I/O
23
I/O
24
I/O
25
I/O
26
I/O
27
I/O
28
I/O
29
I/O
30
I/O
31
SDO/IN 2
SCLK/IN 3
I/O 4
I/O 5
RESET
Global
Routing
Pool
(GRP)
Output Routing Pool (ORP)
Output Routing Pool (ORP)
CLK 0
CLK 1
CLK 2
IOCLK 0
IOCLK 1
Clock
Distribution
Network
D7 D6 D5 D4 D3 D2 D1 D0
B0 B1 B2 B3 B4 B5 B6 B7
A0
A1
A2
A3
A4
A5
A6
A7
C7
C6
C5
C4
C3
C2
C1
C0
Output Routing Pool (ORP)
Generic
Logic Blocks
(GLBs)
Megablock
Output Routing Pool (ORP)
Input Bus
Input Bus
Input Bus
ispEN
lnput Bus
0139(1)-32-isp
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
3
Absolute Maximum Ratings 1
Supply Voltage Vcc .................................. -0.5 to +7.0V
Input Voltage Applied........................ -2.5 to VCC +1.0V
Off-State Output Voltage Applied ..... -2.5 to VCC +1.0V
Storage Temperature ................................ -65 to 150°C
Case Temp. with Power Applied .............. -55 to 125°C
Max. Junction Temp. (TJ) with Power Applied ... 150°C
1. Stresses above those listed under the “Absolute Maximum Ratings” may cause permanent damage to the device. Functional
operation of the device at these or at any other conditions above those indicated in the operational sections of this specification
is not implied (while programming, follow the programming specifications).
DC Recommended Operating Conditions
V
V
PARAMETERSYMBOL MIN. MAX. UNITS
5.25
5.5
5.5
0.8
Vcc + 1
Supply Voltage
V
CC
V
IL
V
IH
Table 2- 0005Aisp w/mil.eps
4.75
4.5
4.5
0
2.0
Commercial T
A
=
0°C to +70°C
Industrial T
A
= -40°C to +85°C
Military/883 T
C
= -55°C to +125°C
Input Low Voltage
Input High Voltage
V
Capacitance (TA=25oC, f=1.0 MHz)
SYMBOL PARAMETER MAXIMUM
1
UNITS TEST CONDITIONS
C
1
Commercial/Industrial 8 pf V
CC
=5.0V, V
IN
=2.0V
Military 10 pf V
CC
=5.0V, V
IN
=2.0V
C
2
I/O and Clock Capacitance 10 pf V
CC
=5.0V, V
I/O
, V
Y
=2.0V
1
.
Guaranteed but not 100% tested.
Table 2- 0006
Dedicated Input Capacitance
Data Retention Specifications
Table 2- 0008B
PARAMETER
Data Retention
MINIMUM MAXIMUM UNITS
Erase/Reprogram Cycles
20
10000
—
—
Years
Cycles
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
4
Switching Test Conditions
Input Pulse Levels GND to 3.0V
Input Rise and Fall Time ≤ 3ns 10% to 90%
Input Timing Reference Levels 1.5V
Output Timing Reference Levels 1.5V
Output Load See figure 2
3-state levels are measured 0.5V from steady-state
active level.
Table 2
-
0003
Output Load Conditions (see figure 2)
Test Condition R1 R2 CL
A 470Ω390Ω35pF
B Active High 390Ω35pF
Active Low 470Ω390Ω35pF
Active High to Z 390Ω5pF
Cat VOH - 0.5V
Active Low to Z 470Ω390Ω5pF
at VOL + 0.5V
∞
∞
Figure 2. Test Load
+ 5V
R1
R2CL
*
Device
Output
Test
Point
*
CL includes Test Fixture and Probe Capacitance.
DC Electrical Characteristics
Over Recommended Operating Conditions
0.4
–
-10
10
-150
-150
-200
190
220
V
V
μA
μA
μA
μA
mA
mA
mA
SYMBOL
V
OL
V
OH
I
IL
I
IH
I
IL-isp
I
IL-PU
I
OS
1
I
CC
2,4
Output Low Voltage
Output High Voltage
Input or I/O Low Leakage Current
Input or I/O High Leakage Current
isp Input Low Leakage Current
I/O Active Pull-Up Current
Output Short Circuit Current
Operating Power Supply Current
IOL =8 mA
IOH =-4 mA
0V ≤ VIN ≤ VIL (MAX.)
3.5V ≤ VIN ≤ VCC
0V ≤ VIN ≤ VIL (MAX.)
0V ≤ VIN ≤ VIL
VCC = 5V, VOUT = 0.5V
VIL = 0.5V, VIH = 3.0V Commercial
fTOGGLE = 1 MHz Industrial/Military
PARAMETER CONDITION MIN. UNITS
MAX.TYP.
3
–
–
–
–
–
–
–
130
135
–
2.4
–
–
–
–
–
–
–
1. One output at a time for a maximum duration of one second.
2. Measured using eight 16-bit counters.
3. Typical values are at VCC = 5V and TA = 25oC.
4. Maximum ICC varies widely with specific device configuration and operating frequency. Refer to the Power Consumption sec-
tion of this datasheet and Thermal Management section of the Lattice Semiconductor Data Book or CD-ROM to estimate maximum
ICC.
Table 2- 0007A-32-isp
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
5
1. Unless noted otherwise, all parameters use a GRP load of 4 GLBs, 20 PTXOR path, ORP and Y0 clock.
2. Refer to Timing Model in this data sheet for further details.
3. Standard 16-Bit counter using GRP feedback.
4. fmax (Toggle) may be less than 1/(twh + twl). This is to allow for a clock duty cycle of other than 50%.
5. Reference Switching Test Conditions section.
MIN. MAX.
Data Propagation Delay, 4PT bypass, ORP bypass
Data Propagation Delay, Worst Case Path
Clock Frequency with Internal Feedback
3
Clock Frequency with External Feedback
Clock Frequency, Max Toggle
4
GLB Reg. Setup Time before Clock, 4PT bypass
GLB Reg. Clock to Output Delay, ORP bypass
GLB Reg.
Hold Time after Clock, 4 PT bypass
GLB Reg. Setup Time before Clock
GLB Reg. Clock to Output Delay
GLB Reg. Hold Time after Clock
Ext. Reset Pin to Output Delay
Ext. Reset Pulse Duration
Input to Output Enable
Input to Output Disable
Ext. Sync. Clock Pulse Duration, High
Ext. Sync. Clock Pulse Duration, Low
I/O Reg. Setup Time before Ext. Sync. Clock (Y2, Y3)
I/O Reg. Hold Time after Ext. Sync. Clock (Y2, Y3)
ns
ns
MHz
MHz
MHz
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
t
pd1
t
pd2
f
max (Int.)
f
max (Ext.)
f
max (Tog.)
t
su1
t
co1
t
h1
t
su2
t
co2
t
h2
t
r1
t
rw1
t
en
t
dis
t
wh
t
wl
t
su5
t
h5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
A
A
A
–
–
–
A
–
–
–
–
A
–
B
C
–
–
–
–
DESCRIPTION
1
PARAMETER #
2
UNITS
TEST
5
COND.
1
tsu2 + tco1
( )
MIN. MAX.
–
–
80
50
100
7
–
0
10
–
0
–
10
–
–
5
5
2
6.5
15
20
–
–
–
–
10
–
–
12
–
17
–
18
18
–
–
–
–
–
–
60
38
83
9
–
0
13
–
0
–
13
–
–
6
6
2.5
8.5
20
25
–
–
–
–
13
–
–
16
–
22.5
–
24
24
–
–
–
–
-80 -60
MIN. MAX.
–
–
90.9
58.8
125
6
–
0
9
–
0
–
10
–
–
4
4
2
6.5
12
17
–
–
–
–
8
–
–
10
–
15
–
15
15
–
–
–
–
-90
Table 2-0030-32/90,80,60C
External Timing Parameters
Over Recommended Operating Conditions
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
6
1. Internal Timing Parameters are not tested and are for reference only.
2. Refer to Timing Model in this data sheet for further details.
3. The XOR adjacent path can only be used by hard macros.
Internal Timing Parameters1
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
–
–
7.3
1.3
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.3
6.0
–
–
–
–
4.6
–
–
2.7
4.0
–
–
4.0
3.3
5.3
2.0
2.7
4.0
5.0
6.0
10.6
8.6
9.3
10.6
12.7
1.3
–
–
2.7
3.3
13.3
12.0
9.9
3.3
0.7
MIN. MAX.
DESCRIPTIONPARAMETER UNITS
-60
Inputs
tiobp
tiolat
tiosu
tioh
tioco
tior
tdin
GRP
tgrp1
tgrp4
tgrp8
tgrp12
tgrp16
tgrp32
GLB
t4ptbp
t1ptxor
t20ptxor
txoradj
tgbp
tgsu
tgh
tgco
tgr
tptre
tptoe
tptck
ORP
torp
torpbp
#
2
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
I/O Register Bypass
I/O Latch Delay
I/O Register Setup Time before Clock
I/O Register Hold Time after Clock
I/O Register Clock to Out Delay
I/O Register Reset to Out Delay
Dedicated Input Delay
GRP Delay, 1 GLB Load
GRP Delay, 4 GLB Loads
GRP Delay, 8 GLB Loads
GRP Delay, 12 GLB Loads
GRP Delay, 16 GLB Loads
GRP Delay, 32 GLB Loads
4 Product Term Bypass Path Delay
1 Product Term/XOR Path Delay
20 Product Term/XOR Path Delay
XOR Adjacent Path Delay
3
GLB Register Bypass Delay
GLB Register Setup Time before Clock
GLB Register Hold Time after Clock
GLB Register Clock to Output Delay
GLB Register Reset to Output Delay
GLB Product Term Reset to Register Delay
GLB Product Term Output Enable to I/O Cell Delay
GLB Product Term Clock Delay
ORP Delay
ORP Bypass Delay
–
–
5.5
1.0
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.0
4.5
–
–
–
–
3.5
–
–
2.0
3.0
–
–
3.0
2.5
4.0
1.5
2.0
3.0
3.8
4.5
8.0
6.5
7.0
8.0
9.5
1.0
–
–
2.0
2.5
10.0
9.0
7.5
2.5
0.5
MIN. MAX.
-80
–
–
4.8
2.1
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1.2
3.6
–
–
–
–
2.8
–
–
1.6
2.4
–
–
2.4
2.8
3.2
1.2
1.6
2.4
3.0
3.6
6.4
5.2
5.7
7.0
8.2
0.8
–
–
1.6
2.0
8.0
7.8
6.0
2.4
0.4
MIN. MAX.
-90
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
7
Internal Timing Parameters1
ns
ns
ns
ns
ns
ns
ns
ns
ns
–
–
–
6.0
4.6
1.3
4.6
1.3
–
4.0
6.7
6.7
6.0
7.3
6.6
7.3
6.6
12.0
Outputs
t
ob
t
oen
t
odis
Clocks
t
gy0
t
gy1/2
t
gcp
t
ioy2/3
t
iocp
Global Reset
t
gr
47
48
49
50
51
52
53
54
55
Output Buffer Delay
I/O Cell OE to Output Enabled
I/O Cell OE to Output Disabled
Clock Delay, Y0 to Global GLB Clock Line (Ref. clock)
Clock Delay, Y1 or Y2 to Global GLB Clock Line
Clock Delay, Clock GLB to Global GLB Clock Line
Clock Delay, Y2 or Y3 to I/O Cell Global Clock Line
Clock Delay, Clock GLB to I/O Cell Global Clock Line
Global Reset to GLB and I/O Registers
MIN. MAX.
DESCRIPTIONPARAMETER UNITS
-60
#2
–
–
–
4.5
3.5
1.0
3.5
1.0
–
3.0
5.0
5.0
4.5
5.5
5.0
5.5
5.0
9.0
MIN. MAX.
-80
1. Internal Timing Parameters are not tested and are for reference only.
2. Refer to Timing Model in this data sheet for further details.
–
–
–
3.6
2.8
0.8
2.8
0.8
–
2.4
4.0
4.0
3.6
4.4
4.0
4.4
4.0
8.2
MIN. MAX.
-90
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
8
ispLSI 1032 Timing Model
GLB Reg
Delay
I/O Pin
(Output)
ORP
Delay
Feedback
4 PT Bypass
20 PT
XOR Delays
Control
PTs
GRP
Loading
Delay
Input
Register
Clock
Distribution
I/O Pin
(Input)
Y0
Y1,2,3
DQ
GRP 4 GLB Reg Bypass ORP Bypass
DQ
RST
RE
OE
CK
I/O Reg Bypass
I/O CellORPGLBGRPI/O Cell
#21 - 25 #27, 29,
30, 31, 32
#28 #33
#34, 35, 36
#51, 52,
53, 54 #42, 43,
44
#50
#45
#46
Reset
Ded. In #26
#20
RST
#55
#55
#37
#38, 39,
40, 41
#48, 49
#47
Derivations of tsu, th and tco from the Product Term Clock1
tsu = Logic + Reg su - Clock (min)
= (tiobp + tgrp4 + t20ptxor) + (tgsu) - (tiobp + tgrp4 + tptck(min))
= (#20 + #28 + #35) + (#38) - (#20 + #28 + #44)
5.5 ns = (2.0 + 2.0 + 8.0) + (1.0) - (2.0 + 2.0 + 3.5)
th = Clock (max) + Reg h - Logic
= (tiobp + tgrp4 + tptck(max)) + (tgh) - (tiobp + tgrp4 + t20ptxor)
= (#20 + #28 + #44) + (#39) - (#20 + #28 + #35)
4.0 ns = (2.0 + 2.0 + 7.5) + (4.5) - (2.0 + 2.0 + 8.0)
tco = Clock (max) + Reg co + Output
= (tiobp + tgrp4 + tptck(max)) + (tgco) + (torp + tob)
= (#20 + #28 + #44) + (#40) + (#45 + #47)
19.0 ns = (2.0+ 2.0 +7.5) + (2.0) + (2.5 + 3.0)
Derivations of tsu, th and tco from the Clock GLB1
tsu = Logic + Reg su - Clock (min)
= (tiobp + tgrp4 + t20ptxor) + (tgsu) - (tgy0(min) + tgco + tgcp(min))
= (#20 + #28 + #35) + (#38) - (#50 + #40 + #52)
5.5 ns = (2.0 + 2.0 + 8.0) + (1.0) - (4.5 + 2.0 + 1.0)
th = Clock (max) + Reg h - Logic
= (tgy0(max) + tgco + tgcp(max)) + (tgh) - (tiobp + tgrp4 + t20ptxor)
= (#50 + #40 + #52) + (#39) - (#20 + #28 + #35)
4.0 ns = (4.5 + 2.0 + 5.0) + (4.5) - (2.0 + 2.0 + 8.0)
tco = Clock (max) + Reg co + Output
= (tgy0(max) + tgco + tgcp(max)) + (tgco) + (torp + tob)
= (#50 + #40 + #52) + (#40) + (#45 + #47)
19.0 ns = (4.5 + 2.0 + 5.0) + (2.0) + (2.5 + 3.0)
1. Calculations are based upon timing specifications for the ispLSI 1032-80.
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
9
Maximum GRP Delay vs GLB Loads
ispLSI 1032-80
ispLSI 1032-60
ispLSI 1032-90
0126A-80-32-isp
1
2
3
4 8 12 16
GLB Loads
GRP Delay (ns)
4
5
6
0
Power Consumption
ure 3 shows the relationship between power and operat-
ing speed.
Power consumption in the ispLSI 1032 device depends
on two primary factors: the speed at which the device is
operating, and the number of Product Terms used. Fig-
Figure 3. Typical Device Power Consumption vs fmax
50
100
150
200
250
0 10203040506070
fmax (MHz)
ICC (mA)
80
Notes: Configuration of eight 16-bit Counters
Typical Current at 5V, 25ßC
ispLSI 1032
0127A-32-80-isp
ICC can be estimated for the ispLSI 1032 using the following equation:
ICC = 52 + (# of PTs * 0.30) + (# of nets * Max. freq * 0.009) where:
# of PTs = Number of Product Terms used in design
# of nets = Number of Signals used in device
Max. freq = Highest Clock Frequency to the device
The ICC estimate is based on typical conditions (VCC = 5.0V, room temperature) and an assumption of 2 GLB loads on
average exists. These values are for estimates only. Since the value of ICC is sensitive to operating conditions and the
program in the device, the actual ICC should be verified.
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
10
Pin Description
Input — Dedicated in-system programming enable input pin. This pin
is brought low to enable the programming mode. The MODE, SDI,
SDO and SCLK options become active.
Input — This pin performs two functions. It is a dedicated input pin when
ispEN is logic high. When ispEN is logic low, it functions as an input
pin to load programming data into the device. SDI/IN 0 also is used as
one of the two control pins for the isp state machine.
Input — This pin performs two functions. It is a dedicated input pin when
ispEN is logic high. When ispEN is logic low, it functions as a pin to
control the operation of the isp state machine.
Input/Output — This pin performs two functions. It is a dedicated input
pin when ispEN is logic high. When ispEN is logic low, it functions as
an output pin to read serial shift register data.
Input — This pin performs two functions. It is a dedicated input when
ispEN is logic high. When ispEN is logic low, it functions as a clock pin
for the Serial Shift Register.
Name PLCC Pin Numbers Description
Input/Output Pins - These are the general purpose I/O pins used by the
logic array.
I/O 0 - I/O 3 26, 27, 28, 29,
I/O 4 - I/O 7 30, 31, 32, 33,
I/O 8 - I/O 11 34, 35, 36, 37,
I/O 12 - I/O 15 38, 39, 40, 41,
I/O 16 - I/O 19 45, 46, 47, 48,
I/O 20 - I/O 23 49, 50, 51, 52,
I/O 24 - I/O 27 53, 54, 55, 56,
I/O 28 - I/O 31 57, 58, 59, 60,
I/O 32 - I/O 35 68, 69, 70, 71,
I/O 36 - I/O 39 72, 73, 74, 75,
I/O 40 - I/O 43 76, 77, 78, 79,
I/O 44 - I/O 47 80, 81, 82, 83,
I/O 48 - I/O 51 3, 4, 5, 6,
I/O 52 - I/O 55 7, 8, 9, 10,
I/O 56 - I/O 59 11, 12, 13, 14,
I/O 60 - I/O 63 15, 16, 17, 18
IN 4 - IN 7 67, 84, 2, 19 Dedicated input pins to the device.
Active Low (0) Reset pin which resets all of the GLB and I/O registers
in the device.
Dedicated Clock input. This clock input is connected to one of the
clock inputs of all of the GLBs on the device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any GLB on the
device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any GLB and/or
any I/O cell on the device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any I/O cell on the
device.
ispEN 23
SDI/IN 0
1
25
MODE/IN 1
1
42
SDO/IN 2
1
44
SCLK/IN 3
1
61
GND 1, 22, 43, 64
VCC 21, 65
Ground (GND)
V
CC
RESET 24
Y0 20
Y1 66
Y2 63
Y3 62
1. Pins have dual function capability
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
11
Pin Description
Input — Dedicated in-system programming enable input pin. This pin
is brought low to enable the programming mode. The MODE, SDI,
SDO and SCLK options become active.
Input — This pin performs two functions. It is a dedicated input pin when
ispEN is logic high. When ispEN is logic low, it functions as an input
pin to load programming data into the device. SDI/IN 0 also is used as
one of the two control pins for the isp state machine.
Input — This pin performs two functions. It is a dedicated input pin when
ispEN is logic high. When ispEN is logic low, it functions as a pin to
control the operation of the isp state machine.
Input/Output — This pin performs two functions. It is a dedicated input
pin when ispEN is logic high. When ispEN is logic low, it functions as
an output pin to read serial shift register data.
Input — This pin performs two functions. It is a dedicated input when
ispEN is logic high. When ispEN is logic low, it functions as a clock pin
for the Serial Shift Register.
No Connect
Description
TQFP Pin Numbers
Name
Input/Output Pins - These are the general purpose I/O pins used by the
logic array.
I/O 0 - I/O 3 17, 18, 19, 20,
I/O 4 - I/O 7 21, 22, 23, 28,
I/O 8 - I/O 11 29, 30, 31, 32,
I/O 12 - I/O 15 33, 34, 35, 36,
I/O 16 - I/O 19 40, 41, 42, 43,
I/O 20 - I/O 23 44, 45, 46, 47,
I/O 24 - I/O 27 48, 53, 54, 55,
I/O 28 - I/O 31 56, 57, 58, 59,
I/O 32 - I/O 35 67, 68, 69, 70,
I/O 36 - I/O 39 71, 72, 73, 78,
I/O 40 - I/O 43 79, 80, 81, 82,
I/O 44 - I/O 47 83, 84, 85, 86,
I/O 48 - I/O 51 90, 91, 92, 93,
I/O 52 - I/O 55 94, 95, 96, 97,
I/O 56 - I/O 59 98, 3, 4, 5,
I/O 60 - I/O 63 6, 7, 8, 9
IN 4 - IN 7 66, 87, 89, 10 Dedicated input pins to the device.
ispEN 14
SDI/IN 0
1
16
MODE/IN 1
1
37
SDO/IN 2
1
39
SCLK/IN 3
1
60
NC
2
1, 2, 24, 25,
26, 27, 49, 50,
51, 52, 74, 75
76, 77, 99, 100
Active Low (0) Reset pin which resets all of the GLB and I/O registers
in the device.
Dedicated Clock input. This clock input is connected to one of the
clock inputs of all of the GLBs on the device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any GLB on the
device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any GLB and/or
any I/O cell on the device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any I/O cell on the
device.
RESET 15
Y0 11
Y1 65
Y2 62
Y3 61
GND 13, 38, 63, 88
VCC 12, 64
Ground (GND)
VCC
1. Pins have dual function capability
2. NC pins are not to be connected to any active signals, Vcc or GND.
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
12
Pin Description
RESET G1
Y0 E1
Y1 E11
Y2 G9
Y3 G11
NC2G3
GND C6, F3, F9, J6
V
CC F2, F11
I/O 0 - I/O 3 F1, H1, H2, J1,
I/O 4 - I/O 7 K1, J2, L1, K2,
I/O 8 - I/O 11 K3, L2, L3, K4,
I/O 12 - I/O 15 L4, J5, K5, L5,
I/O 16 - I/O 19 L7, K7, L6, L8,
I/O 20 - I/O 23 K8, L9, L10, K9,
I/O 24 - I/O 27 L11, K10, J10, K11,
I/O 28 - I/O 31 J11, H10, H11, F10,
I/O 32 - I/O 35 E9, D11, D10, C11,
I/O 36 - I/O 39 B11, C10, A11, B10,
I/O 40 - I/O 43 B9, A10, A9, B8,
I/O 44 - I/O 47 A8, B6, B7, A7,
I/O 48 - I/O 51 A5, B5, C5, A4,
I/O 52 - I/O 55 B4, A3, A2, B3,
I/O 56 - I/O 59 A1, B2, C2, B1,
I/O 60 - I/O 63 C1, D2, D1, E3
IN 4 - IN 7 E10, C7, A6, E2 Dedicated input pins to the device.
Input/Output Pins - These are the general purpose I/O pins used by the
logic array.
Name CPGA Pin Numbers Description
Input – Dedicated in-system programming enable input pin. This pin
is brought low to enable the programming mode. The MODE, SDI,
SDO and SCLK options become active.
Input – This pin performs two functions. It is a dedicated input pin when
ispEN is logic high. When ispEN is logic low, it functions as an input
pin to load programming data into the device. SDI/IN 0 also is used as
one of the two control pins for the isp state machine.
Input – This pin performs two functions. It is a dedicated input pin when
ispEN is logic high. When ispEN is logic low, it functions as a pin to
control the operation of the isp state machine.
Input/Output – This pin performs two functions. It is a dedicated input
pin when ispEN is logic high. When ispEN is logic low, it functions as
an output pin to read serial shift register data.
Input – This pin performs two functions. It is a dedicated input when
ispEN is logic high. When ispEN is logic low, it functions as a clock pin
for the Serial Shift Register.
ispEN G3
SDI/IN 01G2
MODE/IN 11K6
SDO/IN 21J7
SCLK/IN 31G10
Active Low (0) Reset pin which resets all of the GLB and I/O registers
in the device.
Dedicated Clock input. This clock input is connected to one of the
clock inputs of all of the GLBs on the device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any GLB on the
device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any GLB and/or
any I/O cell on the device.
Dedicated Clock input. This clock input is brought into the clock
distribution network, and can optionally be routed to any I/O cell on the
device.
No Connect
Ground (GND)
VCC
Table 2-0002-32/883
1. Pins have dual function capability.
2. NC pins are not to be connected to any active signals, Vcc or GND.
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
13
Pin Configuration
ispLSI 1032 84-Pin PLCC Pinout Diagram
I/O 38
I/O 37
I/O 36
I/O 35
I/O 34
I/O 33
I/O 32
IN 4
Y1
VCC
GND
Y2
Y3
IN 3/SCLK*
I/O 31
I/O 30
I/O 29
I/O 28
I/O 27
I/O 26
I/O 25
I/O 57
I/O 58
I/O 59
I/O 60
I/O 61
I/O 62
I/O 63
IN 7
Y0
VCC
GND
ispEN
RESET
*SDI/IN 0
I/O 0
I/O 1
I/O 2
I/O 3
I/O 4
I/O 5
I/O 6
I/O 56
I/O 55
I/O 54
I/O 53
I/O 52
I/O 51
I/O 50
I/O 49
I/O 48
IN 6
GND
IN 5
I/O 47
I/O 46
I/O 45
I/O 44
I/O 43
I/O 42
I/O 41
I/O 40
I/O 39
I/O 7
I/O 8
I/O 9
I/O 10
I/O 11
I/O 12
I/O 13
I/O 14
I/O 15
*MODE/IN 1
GND
*SDO/IN 2
I/O 16
I/O 17
I/O 18
I/O 19
I/O 20
I/O 21
I/O 22
I/O 23
I/O 24
11 10
9 8 7 6 5 4 3 2 1
84 83 82 81 80 79 78 77 76 75
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53
ispLSI 1032
Top View
*Pins have dual function capability.
0123-32-isp
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
14
1NC
1NC
I/O 57
I/O 58
I/O 59
I/O 60
I/O 61
I/O 62
I/O 63
IN 7
Y0
VCC
GND
ispEN
RESET
2SDI/IN 0
I/O 0
I/O 1
I/O 2
I/O 3
I/O 4
I/O 5
I/O 6
1NC
1NC
NC1
NC1
I/O 38
I/O 37
I/O 36
I/O 35
I/O 34
I/O 33
I/O 32
IN 4
Y1
VCC
GND
Y2
Y3
IN 3/SCLK2
I/O 31
I/O 30
I/O 29
I/O 28
I/O 27
I/O 26
I/O 25
NC1
NC1
NC1
NC1
I/O 56
I/O 55
I/O 54
I/O 53
I/O 52
I/O 51
I/O 50
I/O 49
I/O 48
IN 6
GND
IN 5
I/O 47
I/O 46
I/O 45
I/O 44
I/O 43
I/O 42
I/O 41
I/O 40
I/O 39
NC1
NC1
1NC
1NC
I/O 7
I/O 8
I/O 9
I/O 10
I/O 11
I/O 12
I/O 13
I/O 14
I/O 15
2MODE/IN1
GND
2SDO/IN 2
I/O 16
I/O 17
I/O 18
I/O 19
I/O 20
I/O 21
I/O 22
I/O 23
I/O 24
1NC
1NC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
57
56
55
54
53
52
51
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
100
99
98
97
96
95
94
93
92
91
90
89
88
87
86
85
84
83
82
81
80
79
78
77
76
58
ispLSI 1032
Top View
1. NC pins are not to be connected to any active signal, Vcc or GND.
2. Pins have dual function capability.
0766A-32-isp
Pin Configuration
ispLSI 1032 100-pin TQFP Pinout Diagram
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
15
I/O38
I/O36
I/O35
I/O33
Y1
Vcc
Y3
I/O30
I/O28
I/O27
I/O24
I/O41
I/O39
I/O37
I/O34
IN4
I/O31
*SCLK/
IN3
I/O29
I/O26
I/O25
I/O22
I/O42
I/O40
I/O32
GND
Y2
I/O23
I/O21
I/O44
I/O43
I/O20
I/O19
I/O47
I/O46
IN5
*SDO/
IN2
I/O17
I/O16
IN6
I/O45
GND
GND
*MODE/
IN1
I/O18
I/O48
I/O49
I/O50
I/O13
I/O14
I/O15
I/O51
I/O52
I/O11
I/O12
I/O53
I/O55
INDEX
I/O63
GND
ispEN
I/O8
I/O10
I/O54
I/O57
I/O58
I/O61
IN7
Vcc
*SDI/
IN0
I/O2
I/O5
I/O7
I/O9
I/O56
I/O59
I/O60
I/O62
Y0
I/O0
RESET
I/O1
I/O3
I/O4
I/O6
ispLSI 1032/883
Bottom View
A
B
C
D
E
F
G
H
J
K
L
11 10 9 8 7 6 5 4 3 2 1
PIN A1
*Pins have dual function capability.
0488A-32-isp/883
Pin Configuration
ispLSI 1032/883 84-Pin CPGA Pinout Diagram
ALL DEVICES
DISCONTINUED
Specifications ispLSI 1032
16
tpd (ns)fmax (MHz) Ordering Number Package
90 12 ispLSI 1032-90LT 100-Pin TQFP
80 15 ispLSI 1032-80LJ 84-Pin PLCC
COMMERCIAL
90 12 ispLSI 1032-90LJ 84-Pin PLCC
80 15 ispLSI 1032-80LT 100-Pin TQFP
60 20 ispLSI 1032-60LJ 84-Pin PLCC
60 20 ispLSI 1032-60LT 100-Pin TQFP
INDUSTRIAL
tpd (ns)fmax (MHz) Ordering Number Package
60 20 ispLSI 1032-60LJI 84-Pin PLCC
Family
ispLSI
ispLSI
Family
Table 2- 0041A-32-isp
MILITARY/883
tpd (ns)fmax (MHz) Ordering Number Package
60 20 ispLSI 1032-60LG/883 84-Pin CPGA
ispLSI
Family SMD Number
5962-9308501MXC
Note: Lattice Semiconductor recognizes the trend in military device procurement towards
using SMD compliant devices, as such, ordering by this number is recommended.
60 20 ispLSI 1032-60LTI 100-Pin TQFP
Ordering Information
Part Number Description
Device Number
Grade
Blank = Commercial
I = Industrial
/883 = 883 Military Process
1032 XX X X X
Speed
90 = 90 MHz
f
max
80 = 80 MHz
f
max
60 = 60 MHz
f
max Power
L = Low
Package
J = PLCC
T = TQFP
G = CPGA
—
Device Family
0212-80B-isp1032
ispLSI
ALL DEVICES
DISCONTINUED
