Document 124-1 Surface Mount LC Filters These space saving low and high pass filters are pretuned, tight tolerance modules which serve a wide variety of filtering requirements. They feature 3rd order Butterworth alignment, less than 0.3 dB insertion loss and a compact, 1812-size construction ideally suited for auto insertion and reflow soldering. * 3rd order Butterworth alignment * 50 Ohm characteristic impedance * Less than 0.3 dB insertion loss Coilcraft Designer's Kit D102 contains samples of all low pass filters. To order, contact Coilcraft or visit http://order.coilcraft.com. Low Pass Filters Part number 0.205 max 5,21 -3 dB Cutoff Irms (mA) S3LP156 S3LP306 S3LP606 S3LP157 S3LP307 15 30 60 150 300 MHz MHz MHz MHz MHz 200 300 300 400 400 S3LP507 S3LP707 S3LP807 S3LP907 S3LP108 500 MHz 700 MHz 800 MHz 900 MHz 1.0 GHz 500 500 500 500 500 S3LP128 S3LP158 S3LP188 S3LP218 1.2 1.5 1.8 2.1 GHz GHz GHz GHz 0.085 max 2,16 0.180 4,57 0.120 3,05 0.020 0,51 Irms (mA)1 S3HP156 S3HP306 S3HP606 S3HP157 S3HP307 15 MHz 30 MHz 60 MHz 150 MHz 300 MHz 300 300 300 300 300 S3HP507 S3HP807 500 MHz 800 MHz 500 500 1. Average current for a 15C rise above 25C ambient. 2. Operating temperature range -40C to +85C. 3. Electrical specifications at 25C. 0.070 1,78 0.055 1,40 P3 P1 0.040 1,02 P2 In Low pass P1 Out P3 0.045 1,14 P2 High pass In Out P1 P3 0.050 1,27 P2 Weight: 64.7 - 69.0 mg Tape and reel: 600/7 reel; 2200/13 reel 12 mm tape width See Tape and Reel Specifications section for packaging data. See Color Coding section for part marking data. Specifications subject to change without notice. (c) Coilcraft, Inc. 2006 1st digit (over P3) Multiplier (x10) (over P2) 0.160 max 4,06 Recommended Land Pattern -3 dB Cutoff 2nd digit (over P1) 0.040 1,02 0.125 3,18 500 500 500 500 High Pass Filters Part number Part marking 1 Document 124-1 Revised 11/11/03 Document 124-2 Surface Mount LC Filters Frequency Response--Low Pass Filters* 0 dB Attenuation (re: 50) dB Attenuation (re: 50) 0 S3LP-156 S3LP-306 20 S3LP-606 40 60 80 S3LP-157 S3LP-307 S3LP-807 20 30 40 10 100 1000 100 Frequency (MHz) 1000 10000 Frequency (MHz) 0 0 dB Attenuation (re: 50) dB Attenuation (re: 50) S3LP-507 10 S3LP-707 10 S3LP-907 S3LP-128 20 30 40 S3LP-188 10 S3LP-218 20 S3LP-158 30 40 100 1000 10000 100 Frequency (MHz) 1000 10000 Frequency (MHz) Frequency Response--High Pass Filters* 0 dB Attenuation (re: 50) dB Attenuation (re: 50) 0 S3HP-606 S3HP-306 20 S3HP-156 40 60 S3HP-307 S3HP-807 10 S3HP-157 S3HP-507 20 30 40 80 1 10 Frequency (MHz) 100 10 100 1000 Frequency (MHz) *Measured on Agilent/HP 8753D network analyzer Specifications subject to change without notice. (c) Coilcraft, Inc. 2006 Document 124-2 Revised 6/3/02