DB101G THRU DB107G Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 1.0 Ampere DB Features a a a a a a a DBS UL Recognized File # E-96005 Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique High temperature soldering guaranteed: 250C / 10 seconds / 0.375" ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Small size, simple installation Leads solderable per MIL-STD-202, Method 208 High surge current capability Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number DB101G DB102G DB103G DB104G DB105G DB106G DB107G DBS DBS DBS DBS DBS DBS DBS 101G 102G 103G 104G 105G 106G 107G Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage 50 35 50 100 70 100 Maximum Average Forward Rectified Current @TA = 40C Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.0A Maximum DC Reverse Current @ TA=25C at Rated DC Blocking Voltage @ TA=125C Operating Temperature Range TJ Storage Temperature Range TSTG Note: DBS for Surface Mount Package. - 470 - 200 140 200 400 280 400 600 420 600 800 560 800 Units 1000 V 700 V 1000 V 1.0 A 50 A 1.1 V 10 500 -55 to +150 -55 to +150 uA uA C C RATINGS AND CHARACTERISTIC CURVES (DB101G THRU DB107G) FIG.1- MAXIMUM DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 60 .06" (1.5mm) PCB Copper Pauls .51" x .51" (13mm x 13mm) 0.5 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 140 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 1.0 FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT Tj=25 0C 50 Single Sine - Wave (JEDEC Method) 40 30 20 10 0 150 1 2 o AMBIENT TEMPERATURE. ( C) 4 6 10 20 40 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT FIG.3- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 10 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) Tj=125 0C 10 1.0 .10 Tj=25 0C 1 0.1 0 Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE .01 CAPACITANCE.(pF) 100 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 1.0 Tj=25 0C f=1.0MHz Vsig=50mVp-p 10 0.6 0.8 1.0 1.2 FORWARD VOLTAGE. (V) FIG.5- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 10 1 0.01 0.4 140 100 REVERSE VOLTAGE. (V) - 471- 1.4 1.6 60 100