SMD B 19-226/R6GHC-A03/2T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm). Description The 19-226 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. 1 Copyright (c) 2010, Everlight All Rights Reserved. Release Date :Oct .23 .2014 Issue No:DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Device Selection Guide Chip Code Emitted Color Materials R6 AlGaInP Brilliant Resin Color Red Water Clear GH InGaN Brilliant Green Absolute Maximum Ratings (Ta=25) Parameter Symbol Reverse Voltage VR Code R6 Forward Current eak Forward Current (Duty 1/10 @1KHz) Power Dissipation Electrostatic Discharge Rating Unit 5 V 25 IF mA GH 25 R6 60 IFP mA GH 100 R6 60 GH 95 R6 2000 Pd mW ESDHBM V GH 150 Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol 2 Reflow Soldering : 260 for 10 sec. Hand Soldering : 350 for 3 sec. Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Electro-Optical Characteristics (Ta=25) Parameter Symbol Luminous Intensity Code Min. Typ. Max. R6 72.0 ----- 140 21/2 R6 Peak Wavelength Dominant Spectrum 112 ----- 285 ----- 120 ----- ----- 632 ----- p Radiation Bandwidth Forward Voltage Reverse Current deg nm GH ----- 518 ----- R6 615 ----- 625 d Wavelength Condition mcd Iv GH Viewing Angle Unit IF=20mA nm GH 520 ----- 530 R6 ----- 20 ----- nm GH ----- 35 ----- R6 1.7 2.0 2.4 V VF GH 2.7 3.3 3.7 R6 ----- ----- 10 A IR GH ----- ----- VR=5V 50 Note: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength 1nm 3. Tolerance of Forward Voltage 0.1V 3 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T R6 Bin Range of Luminous Intensity Bin Code Min. Max. Q1 72 90 Q2 90 112 R1 112 140 Unit Condition mcd IF =20mA Unit Condition nm IF =20mA Unit Condition mcd IF =20mA Unit Condition nm IF =20mA Bin Range of Dom. Wavelength Bin Code Min. Max. 1 615 620 2 620 625 GH Bin Range of Luminous Intensity Bin Code Min. Max. R1 112 140 R2 140 180 S1 180 225 S2 225 285 Bin Range of Dom. Wavelength Bin Code Min. Max. 1 520 525 2 525 530 Note: 1. Tolerance of Luminous Intensity: 11% 2. Tolerance of Dominant Wavelength 1nm 4 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Typical Electro-Optical Characteristics Curves R6 5 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Typical Electro-Optical Characteristics Curves GH 6 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Package Dimension Note: Tolerances unless mentioned 0.1mm. Unit = mm 7 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Moisture Resistant Packing Materials Label Explanation Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX QTY : XXX CPN: Customer's Product Number P/N: Product Number QTY: Packing Quantity CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates & Dom. Wavelength Rank REF: Forward Voltage Rank LOT No: Lot Number HUE : XXX REF : XXX LO T NO : XXXXXXXXXX R e fe r e n c e : X X X X X X X X MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm 8 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging L abel 9 A lu m in u m m o is tu r e - p r o o f b a g D e s ic c a n t L abel Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 After opening the package: The LEDs should be kept at 30 or less and 60%RH or less. 2.3 The LEDs should be used within 168 hours (7days) after opening the package . If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. 10 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com DATASHEET SMD B 19-226/R6GHC-A03/2T Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 11 Copyright (c) 2010, Everlight All Rights Reserved. Release Date : Oct.23.2014 Issue No: DSE-0012219 Rev.2 www.everlight.com