The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Stripline Mounting Fixed Attenuators (DC to 8 GHz) AT-900 Series Features 1.Frequency Range from DC to 8 GHz Although these attenuators are of the surface mount type, they offer superior high frequency characteristics from DC to 8 GHz. 2.Abundant Variations of Attenuators Attenuation amounts are available in 11 types from 0 to 10 dB in 1 dB steps. AT-900(40) Type Product Specifications Ratings DC to 8.0 GHz 50 ohms 1W Frequency Range (Note) Characteristic impedance Maximum Input Power (Note) Operating temperature range Operating relative humidity -10c to +65c 95% Max. Note: The frequency range and the maximum input power will differ depending on the products. Item Standard Conditions Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions 1.Vibration No electrical discontinuity of 1 s or more 2.Shock No damage, cracks, or parts dislocation Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55c +15c to +35c +85c +15c to +35c Time: 30 15 max. 30 15 max. (Minutes) 5 cycles 3.Temperature cycle No damage, cracks, or parts dislocation The test method conforms to MIL-STD-202. Materials Part Material Finish Connector Body Brass Nickel plating Attenuation element Metal film ---------- Tabs Copper Solder plating Ordering Information AT --- 9 01 (40) 1 1 AT: Indicates a fixed attenuator 2 Indicates the Series Name: AT-900 Series 3 2 4 3 Attenuation 01 : 1dB 06 : 6dB 00-(0) : 0dB (Through) 00-(1.5) : 1.5dB 4 (40): RoHS Compliant 89 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products SeriesStripline have been discontinued, or will be discontinued Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. AT-900 Mounting Fixedsoon. Attenuators (DC to 8 GHz) Specifications Attenuation (dB) Model No. DC~4GHz AT-900-(0)(40) 0 +0.5 0 4~8GHz 0 V.S.W.R. (Max) DC~8GHz Power (W) Surface Temperature at Maximum Load (c Max) Weight (g) 1.35 1 +85 1 +0.7 0 AT-901(40) 10.5 10.7 1.35 1 +85 1 AT-902(40) 20.5 20.7 1.35 1 +85 1 AT-903(40) 30.5 30.7 1.35 1 +85 1 AT-904(40) 40.5 40.7 1.35 1 +85 1 AT-905(40) 50.5 50.7 1.35 1 +85 1 AT-906(40) 60.5 60.7 1.35 1 +85 1 AT-907(40) 70.5 70.7 1.35 1 +85 1 AT-908(40) 80.5 80.7 1.35 1 +85 1 AT-909(40) 90.5 90.7 1.35 1 +85 1 AT-910(40) 100.5 100.7 1.35 1 +85 1 RoHS YES External Dimensions 15 2.5 2.5 0.4 5.2 1.4 1.6 3 (11.2) 3 2-O2.6 10 AT-900 Type 90 04/2009 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, contact your Hirose AT-900 SeriesStripline Mounting Fixed or Attenuators (DCsales to 8representative. GHz) Typical Data V.S.W.R. AT-901(40) V.S.W.R. AT-903(40) V.S.W.R. AT-906(40) V.S.W.R. AT-910(40) Mounting Method AT-900(40) Type Make the AT-900(40) tab height from the housing and the thickness of the microstrip board the same amount. The tabs are attached with high temperature solder (having a melting point of 280c). The soldering temperature to the microstrip board must be less than this. 91 04/2009