09/2008
155
Ø d ±0.05 p 15 22.5 p 27.5 p = 37.5
0.6 or 0.8* 0.8 1.0
*See size table.
All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal layer deposited by evaporation under vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame retardant according to
UL94 V0.
Marking: Manufacturer’s logo, series, capacitance, tolerance,
rated voltage, capacitor class, dielectric code, climatic category,
passive ammability category, manufacturing date code, approvals,
manufacturing plant.
Climatic category: 40/110/56 IEC 60068-1
Operating temperature range: -40 to +110°C
Related documents: IEC 60384-14, EN 60384-14.
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 275Vac (50/60Hz) / 560 Vdc
Capacitance range: 0.022µF to 10µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±10% (K); ±20% (M).
tolerance ±5% (J) available upon request
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C: 15 (8)* at 1kHz
* Typical value
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100 Vdc
Performance
1x105 M (5x105 M )* for C0.33µF
30000 s (150000 s )* for C>0.33µF
* Typical value
Test voltage between terminations (on all pieces):
1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
R.46 SVERSION
X2 CLASS (IEC 60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Typical applications: This special R46 release is designed
for applications in series with the main .
PRODUCT CODE: R46
Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
10.0 All B +0.2 H +0.1 L +0.2
15.0 <7.5 B +0.2 H +0.1 L +0.3
15.0 ≥7.5 B +0.2 H +0.1 L +0.5
22.5 All B +0.2 H +0.1 L +0.3
27.5 All B +0.2 H +0.1 L +0.3
37.5 All B +0.3 H +0.1 L +0.3
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions 1st
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Test conditions 2nd
Temperature: +60°C ± 2°C
Relative humidity (RH): 95% ±2%
Test duration: 500 hours
Test conditions 3rd
Temperature: +40°C ± 2°C
Relative humidity (RH): 93% ±2%
Test duration: 500 hours
Voltage value: 230 Vac, 50 Hz
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 5%
Insulation resistance: 50% of initial limit.
Endurance:
Test conditions
Temperature: +110°C ± 2°C
Test duration: 1000 h
Voltage applied: 1.25 x VR +1000Vac 0.1 s/h
Performance
Dielectric strength: no dielectric breakdown or
ashover at 4.3 x VR (d.c.)/1 min
Capacitance change |C/C|: 10%
Insulation resistance: 50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C ± 5°C
Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |C/C|: 2%
Loose Taped
Fig.1 Fig.2
09/2008 156
Rated Cap.
(*)
275 Vac / 560 Vdc
Std dimensions
Ø d Max
dv/dt at
390Vdc
Part Number
B H L p (V/ µs)
0.010 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2100 - - S0 -
0.015 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2150 - - S0 -
0.022 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2220 - - S0 -
0.033 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2330 - - S0 -
0.047 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2470 - - S1 -
0.068 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 2680 - - S0 -
0.10 µF 5.0 11.0 18.0 15.0 0.6 400 R46 KI 3100 - - S1 M
0.10 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3100 - - S0 -
0.15 µF 6.0 12.0 18.0 15.0 0.6 400 R46 KI 3150 - - S1 M
0.15 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3150 - - S0 -
0.15 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3150 - - S3 -
0.22 µF 7.5 13.5 18.0 15.0 0.6 400 R46 KI 3220 - - S1 M
0.22 µF 8.5 14.5 18.0 15.0 0.6 400 R46 KI 3220 - - S0 -
0.22 µF 6.0 17.5 18.0 15.0 0.6 400 R46 KI 3220 - - S2 -
0.22 µF 9.0 12.5 18.0 15.0 0.6 400 R46 KI 3220 - - S3 -
0.33 µF 13.0 12.0 18.0 15.0 0.8 400 R46 KI 3330 - - S1 -
0.33 µF 8.5 14.5 18.0 15.0 0.8 400 R46 KI 3330 - - S3 M
0.33 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3330 - - S0 -
0.33 µF 7.5 18.5 18.0 15.0 0.8 400 R46 KI 3330 - - S2 -
0.47 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3470 - - S0 -
0.47 µF 10.0 16.0 18.0 15.0 0.8 400 R46 KI 3470 - - S1 M
0.56 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3560 - - S0 -
0.68 µF 11.0 19.0 18.0 15.0 0.8 400 R46 KI 3680 - - S0 M
0.22 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3220 - - S0 -
0.33 µF 6.0 15.0 26.5 22.5 0.8 200 R46 KN 3330 - - S1 M
0.33 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3330 - - S0 -
0.47 µF 7.0 16.0 26.5 22.5 0.8 200 R46 KN 3470 - - S1 M
0.47 µF 8.5 17.0 26.5 22.5 0.8 200 R46 KN 3470 - - S0 -
0.68 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 3680 - - S0 -
1.0 µF 10.0 18.5 26.5 22.5 0.8 200 R46 KN 4100 - - S2 M
1.0 µF 11.0 20.0 26.5 22.5 0.8 200 R46 KN 4100 - - S1 -
1.2 µF 13.0 22.0 26.5 22.5 0.8 200 R46 KN 4120 - - S0 -
0.47 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3470 - - S0 -
0.68 µF 9.0 17.0 32.0 27.5 0.8 150 R46 KR 3680 - - S1 -
1.0 µF 11.0 20.0 32.0 27.5 0.8 150 R46 KR 4100 - - S1 -
1.5 µF 13.0 22.0 32.0 27.5 0.8 150 R46 KR 4150 - - S1 -
2.2 µF 13.0 25.0 32.0 27.5 0.8 150 R46 KR 4220 - - S2 -
3.3 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4330 - - S2 -
4.7 µF 18.0 33.0 32.0 27.5 0.8 150 R46 KR 4470 - - S2 -
1.5 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4150 - - S1 -
2.2 µF 11.0 22.0 41.5 37.5 1.0 100 R46 KW 4220 - - S2 M
2.2 µF 13.0 24.0 41.5 37.5 1.0 100 R46 KW 4220 - - S1 -
3.3 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4330 - - S1 -
4.7 µF 16.0 28.5 41.5 37.5 1.0 100 R46 KW 4470 - - S2 M
4.7 µF 19.0 32.0 41.5 37.5 1.0 100 R46 KW 4470 - - S1 -
6.8 µF 20.0 40.0 41.5 37.5 1.0 100 R46 KW 4680 - - S2 -
10.0 µF 30.0 45.0 41.5 37.5 1.0 100 R46 KW 5100 - - S1 -
R.46 SVERSION
X2 CLASS (IEC60384-14) - MKP Series
METALLIZED POLYPROPYLENE FILM CAPACITOR
SELF-HEALING PROPERTIES
Table 1
Standard
packaging style
Lead
length
(mm)
Taping style Ordering
code
(Digit 10 to 11)
P2
(mm)
Fig.
(No.)
Pitch
(mm)
AMMO-PACK
AMMO-PACK
12.70
19.05
1
2
10.0/15.0
22.5
DQ
DQ
REEL Ø500mm
REEL Ø500mm
12.70
19.05
1
2
10.0/15.0
22.5/27.5
CK
CK
Loose, short leads
Loose, long leads
Loose, long leads
04 +2
25 -1/+2
30 +5
00
50
40
Loose, insulated
rigid leads
Loose, insulated
exible leads
30 +5
150 ±5
51
52
(**) ENEC mark has replaced all the following European
National marks:
APPROVALS
Rated voltage (K=275Vac)
Mechanical version and packaging (Table 1)
Tolerance: K (±10%); M (±20%)
300Vac Available upon request
E12 Series available upon request
All dimensions are in mm
(**)
ENEC
IEC 60384-14 Class X2 File No.V4413
UL 1414
(up to 1µF, 85°C;
250Vac)
Across-the-line File No.E97797
CSA - C22.2 No.1
(up to 1µF, 85°C;
250Vac)
Across-the-line
certied for
Canada
File No.E97797
UL 1283
(310 Vac)
Electromagnetic
Interference
Filters
File No.E85238
CSA - C22.2 No.8
(310 Vac)
Electromagnetic
Interference
Filters certied
for Canada
File No.E85238
GB/T 14472 Class X2 File CQC03001008199
CQC03001008842
Approved according to IEC 60384-14
According to IEC 60065
Note: Ammo-pack is the preferred packaging for taped version.