NL8060BC26-17 - NEC Electronics

2000

DATA SHEET

DESCRIPTION

The NL8060BC26-17 is a TFT (thin film transistor) active-matrix color liquid crystal display (LCD) module

comprising an amorphous silicon TFT attached to each signal electrode, a driving circuit, and a backlight.

The NL8060BC26-17 has a built-in backlight. The backlight includes long-life lamps, which are replaceable, and

a holder.

The 26 cm diagonal display area contains 800 × 600 pixels and can display 262,144 colors simultaneously.

The NL8060BC26-17 is suitable for industrial application use because the viewing angle is wide and the luminance

is high. The viewing direction is selectable for either the upper or the lower side by changing the scan direction.

FEATURES

• High luminance (280 cd/m2, typ.)

• Wide viewing angle (with retardation film)

• Low reflection

• Reversible scan direction

• 6-bit digital RGB signals

• Data enable (DE) function

• Edge-type backlight with two long-filetime lamps (one lamp holder)

• Replaceable lamp holder

• Recommendation inverter for a backlight: Part No. 104PWBR1

APPLICATIONS

• Display terminals for control systems

• Monitors for process controllers

Document No. EN0493EJ1V1DS00 (1st edition)

Date Published January 2001 P CP(N)

Printed in Japan

The information in this document is subject to change without notice.

Please confirm the delivery specification before starting to design your system.

TFT COLOR LCD MODULE

NL8060BC26-17

26 cm (10.4 inches), 800 × 600 pixels, 262,144 colors

high luminance, wide viewing angle

NL8060BC26-17

2Data Sheet EN0493EJ1V1DS00

STRUCTURE AND FUNCTION

A color TFT (thin film transistor) LCD module is comprised of a TFT liquid crystal panel structure, LSIs for

driving the TFT array, and a backlight assembly. The TFT panel structure is created by sandwiching liquid crystal

material in the narrow gap between a TFT array glass substrate and a color filter glass substrate. After the driver

LSIs are connected to the panel, the backlight assembly is attached to the back side of the panel.

RGB (red, green, blue) data signals from a source system are modulated into a form suitable for active-matrix

addressing by the onboard signal processor and sent to the driver LSIs, which in turn address the individual TFT

cells.

Acting as an electro-optical switch, each TFT cell regulates light transmission from the backlight assembly

when activated by the data source. By regulating the amount of light passing through the array of red, green,

and blue dots, color images are created with clarity.

CHARACTERISTICS (at room temperature)

Display area 211.2 (H) × 158.4 (V) mm

Drive system a-Si TFT active matrix

Display colors 262,144 colors

Number of pixels 800 × 600 pixels

Pixel arrangement RGB vertical stripe

Pixel pitch 0.264 (H) × 0.264 (V) mm

Module size 243.0 (H) × 185.1 (V) × 11.5 max. (D) mm

Weight 520 (typ.)

Contrast ratio 300:1 (typ.)

Viewing angle (more than the contrast ratio of 10:1)

Horizontal: 50° (typ. left side, right side)

Vertical: 35° (typ. up side), 45° (typ. down side)

Designed viewing direction • Wider viewing angle with contrast ratio: down side

(6 o’clock, normal scan)

up side

(12 o’clock, reverse scan)

• Wider viewing angle without image reversal: up side

(12 o’clock, normal scan)

down side

(6 o’clock, reverse scan)

• Optimum gray-scale (γ = 2.2): perpendicular

Color gamut 43% (typ. center, to NTSC)

Response time 15 ms (max.), “white 100%” to “black 10%”

Luminance 280 cd/m2 (typ.) (lamp current: IL = 5 mA rms per lamp)

Signal system 6-bit digital signals for each of the RGB primary colors, synchronous signals

(Hsync, Vsync), dot clock (CLK)

Supply voltage 3.3 V [5.0 V] (logic, LCD driving)

Backlight Edge light type, two cold cathode fluorescent lamps in a holder, attached

inverter

• Lamp holder set: Part no.104LHS31

• Recommended inverter: Part no. 104PWBR1

Power consumption 7.0 W (typ. at 3.3 V, with recommended inverter)

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

BLOCK DIAGRAM

Note: Frame is not connected with GND (SG).

If connecting the NEC-recommended inverter

Inverter

VDDB Backlight

BRTHL

BRTC

BRTH

BRTL

GNDB

(Part no. 104PWBR1)

47 Ω

R0 ~ R5

47 Ω

G0 ~ G5

47 Ω

B0 ~ B5

Digital

signal

processor

47 Ω

CLK

47 Ω

Hsync

47 Ω

Vsync

LCD

timing

controller

Power

supply

circuit

LSIs

Drivers

V-driver

600 lines

2400 lines

TFT LCD panel

H: 800 × 3 (R, G, B)

V: 600

Level

shift

· · · · · ·

47 Ω

MODE

DPS

47 kΩ

GND (SG)

Frame

Backlight

HIGH

LOW

H-driver

NL8060BC26-17

4Data Sheet EN0493EJ1V1DS00

GENERAL SPECIFICATIONS

Item Specification Unit

Module size 243.0 ± 0.5 (H) × 185.1 ± 0.5 (V) × 11.5 max. (D) mm

Display area 211.2 (H) × 158.4 (V) mm

Number of pixels 800 (H) × 600 (V) pixel

Dot pitch 0.088 (H) × 0.264 (V) mm

Pixel pitch 0.264 (H) × 0.264 (V) mm

Pixel arrangement RGB (red, green, blue) vertical stripe

Display colors 262,144 color

Weight 520 (typ.) 550 (max.) g

ABSOLUTE MAXIMUM RATINGS

Parameter Symbol Rating Unit Remarks

Supply voltage VCC –0.3 to 6.5 V VI – VCC < 3.0

Input voltage VI–0.3 to 6.5 V Ta = 25 ˚C

Lamp voltage VL2000 Vrms Ta = 25 ˚C

Storage temp. TST –20 to 60 ˚C

Operating temp. TOP 0 to 50 ˚C Module surfaceNote

Relative humidity (RH) <

= 95 % Ta <

= 40 ˚C

= 85 % 40 < Ta <

= 50 ˚C

Absolute humidity Absolute humidity shall not g/m3Ta > 50 ˚C

exceed Ta = 50 ˚C, RH = 85 %

Note: Measured at the panel surface (including self-heat)

ELECTRICAL CHARACTERISTICS

(1) Logic, LCD Driving

Ta = 25 ˚C

Parameter Symbol Min. Typ. Max. Unit Remarks

Supply voltage VCC 3.0 3.3 3.6 V VCC = 3.3 V

(4.75) (5.0) (5.25) (VCC = 5.0 V)

Logic input “L” voltage VIL 0–VCC × 0.3 V CMOS level

Logic input “H” voltage VIH VCC × 0.7 – VCC V

Supply current ICC – 360 550 mA VCC = 3.3 V

– (270)Note (500) (VCC = 5.0 V)

Note: Checker flag pattern (in EIAJ ED-2522)

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

(2) Backlight

Ta = 25 ˚C

Parameter Symbol Min. Typ. Max. Unit Remarks

Lamp current IL2.0 5.0 5.5 mA rms with one lamp

Lamp voltage VL– 510 – V rms –

Lamp turn-on voltage VS840 – – V rms Ta = 25 ˚C *2

1265 – – Ta = 0 ˚C *2

Oscillator frequency Ft 50 54 58 kHz *1

Notes: 1. Recommended value of Ft.

• Ft is within the specification.

and

• Ft = 1/4Th × (2n –1) Th: Hsync period

n: a natural number (1, 2, 3…)

If Ft is out of the recommended value, interference between the Ft frequency and Hsync frequency

may cause a beat on the display.

2. When Vs is less than the minimum value, the lamp might be not turned on.

3. Recommended inverter: Part no. 104PWBR1

SUPPLY VOLTAGE SEQUENCE Notes: 1. The supply voltage for input signals

should be the same as VCC.

2. Turn on the backlight within the LCD

operation period. When the backlight

turns on before LCD operation or the

LCD operation turns off before the

backlight turns off, the display may

momentarily become white.

3. When the power is off, please keep

whole signals (Hsync, Vsync, CLK,

DE, R0 ~ R5, G0 ~ G5, B0 ~ B5) at

low level or high impedance.

4. The wrong power sequence may

damage the module.

5. The signal should not be down dur-

ing operation. Even if the signal

could recover, the LCD module

cannot be operated correctly and

the display may be non-uniform. If

the signal is down, VCC should be

turned off, and then VCC and the

signal should be turned on as in the

sequence above.

3.0 (4.75 V) 3.0 (4.75 V)

Time

0 s<t<35 ms 0 s<t<35 ms

- ON

VALID priod.

Signals: CLK, Hsync, Vsync, DE, R0 ~ R5, G0 ~ G5, B0 ~ B5

- OFF

Signals

NL8060BC26-17

6Data Sheet EN0493EJ1V1DS00

INTERFACE AND CONNECTOR PIN ASSIGNMENT

(1) Interface Signals, Power Supply

Module side connector Mating connector

CN1 DF9-41P-1V (No. 1 to 41) DF9-41S-1V

Supplier: Hirose Electric Co., Ltd.







Pin No. Symbol Function

22 GND Ground

23 G3 Green data

24 G4 Green data

25 G5 Green data (MSB)

26 GND Ground

27 GND Ground

28 GND Ground

29 B0 Blue data (LSB)

30 B1 Blue data

31 B2 Blue data

32 GND Ground

33 B3 Blue data

34 B4 Blue data

35 B5 Blue data (MSB)

36 GND Ground

37 DE Data enable signal

38 DPS Scan direction select Note 3

39 VCC Power supply Note 1

40 VCC Power supply Note 1

41 MODE Mode select Note 2

LSB: Least-Significant Bit

MSB: Most-Significant Bit

Pin No. Symbol Function

1 GND Ground

2 CLK Dot clock

3 GND Ground

4 Hsync Horizontal sync.

5 Vsync Vertical sync.

6 GND Ground

7 GND Ground

8 GND Ground

9 R0 Red data (LSB)

10 R1 Red data

11 R2 Red data

12 GND Ground

13 R3 Red data

14 R4 Red data

15 R5 Red data (MSB)

16 GND Ground

17 GND Ground

18 GND Ground

19 G0 Green data (LSB)

20 G1 Green data

21 G2 Green data

Notes: 1. VCC: All VCC terminals should be connected to 3.3 V [5.0 V].

2. MODE: H = Fixed mode

L or open = DE mode

3. DPS can change scan direction (normal scan and reverse scan).

DPS: Vcc = normal scan

GND or open = reverse scan

See page 16, DISPLAY POSITION, for an altemate reversible scan.

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

(2) Lamp Connector

Lamp side connector Mating connector

CN2 ··· BHR-03VS-1 SM02 (4.0) B-BHS-TB

Supplier: J.S.T. Trading Company, Ltd.

Pin No. Symbol Function

1VLOW Low voltage terminal

2VHIGH High voltage terminal

3VHIGH High voltage terminal

Caution: VHIGH and VLOW must be connected correctly. If they are connected incorrectly, the user may get

hurt and the module may break.

a) Connection of recommended inverter: 104PWBR1 (NEC)

Inverter side connector 1 Mating connector 1

CN1 ··· LZ-5P-SL-SMT LZ-5S-SC3

Supplier: Japan Aviation Electronics Industry, Limited (JAE)

Pin No. Symbol Function Pin No. Symbol Function

1VDDB Power supply (12 V) 4 GNDB Backlight ground

2VDDB Power supply (12 V) 5 BRTHL Luminance selectNote

3 GNDB Backlight ground

Note: High luminance (100%): BRTHL = High (+5 V) or open

Low luminance (60%): BRTHL = Low (GNDB level)

Inverter side connector 2 Mating connector 2

CN3 ··· IL-Z-3PL-SMTY IL-Z-3S-S125C3

Supplier: Japan Aviation Electronics Industry, Limited (JAE)

Pin No. Symbol Function

1 BRTC Backlight On/Off signal Note 1

2 BRTH Luminance control input Note 2

3 BRTL Luminance control input Note 2

Notes: 1. TTL level

Backlight On: BRTC = High (+5 V) or open

Backlight Off: BRTC = Low (GNDB level)

NL8060BC26-17

8Data Sheet EN0493EJ1V1DS00

2. <1> Luminance control by a variable resistor

This way works when BRTHL (the no. 5 pin) of CN3 is opened.

Mating variable resistor: 10 KΩ ±5 %

Minimum luminance (50%): R = 0 Ω

Maximum luminance (100%): R = 10 KΩ

<2> Luminance control by voltage

This way works when BRTL is opened. The range of input voltage between BRTH

and GNDB is as follows.

Minimum luminance (50%): 2.5 V

Maximum luminance (100%): <

= 1.2 V

BRTLBRTH

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

(3) Connector Location

Upper side

Lower side

CN2

CN1

CN3

Recommended

inverter (104PWBR1)

•

NL8060BC26-17

10 Data Sheet EN0493EJ1V1DS00

DISPLAY COLORS vs. INPUT DATA SIGNALS

Display Colors Data Signal (0: Low level; 1: High level)

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0

Black 000000 000000 000000

Blue 000000 000000 111111

Red 111111 000000 000000

Basic colors Magenta 111111 000000 111111

Green 000000 111111 000000

Cyan 000000 111111 111111

Yellow 111111 111111 000000

White 111111 111111 111111

Black 000000 000000 000000

000001 000000 000000

Dark 000010 000000 000000

↑|||

Red gray-scale | | |

↓|||

Bright 111101 000000 000000

111110 000000 000000

Red 111111 000000 000000

Black 000000 000000 000000

000000 000001 000000

Dark 000000 000010 000000

↑|||

Green gray-scale | | |

↓|||

Bright 000000 111101 000000

000000 111110 000000

Green 000000 111111 000000

Black 000000 000000 000000

000000 000000 000001

Dark 000000 000000 000010

↑|||

Blue gray-scale | | |

↓|||

Bright 000000 000000 111101

000000 000000 111110

Blue 000000 000000 111111

Note: Colors are developed in combination with 6-bit signals (64 steps in gray-scale) of each primary red, green,

and blue color. This process can result in up to 262,144 (64 × 64 × 64) colors.

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

INPUT SIGNAL TIMING

(1) Input Signal Specifications

Parameter

Symbol

Min. Typ. Max. Unit Remarks

CLK Frequency 1/tC34.0 38.362 40.0 MHz 26.067 ns (typ.)

Duty tch/tC0.4 0.5 0.6 ––

Rise, fall tcrf ––10 ns –

Hsync Period th 24.3 26.693 –

s 37.468 kHz (typ.)

–1024 –CLK

Display period thd 800 CLK –

Front porch thf –24 –CLK Fixed mode

424–CLK DE mode

Pulse width thp 2 72 127 CLK Fixed mode

272–CLK DE mode

Back porch thb 2 128 198 CLK Fixed mode

2 128 –CLK DE mode

thp + thb 200 CLK Fixed mode

15 200 –CLK DE mode

CLK-Hsync timing thch 10 ––ns –

Hsync-CLK timing thcs 8 ––ns –

Hsync-Vsync timing thv 1 ––CLK –

Vsync-Hsync timing tvs 15 ––ns –

Rise, fall thrf ––10 ns –

Vsync Period tv 16.1 16.683 17.2 ms 59.94 Hz (typ.)

–625 –H

Display period tvd 600 H

Front porch tvf –1–H Fixed mode

–1–H DE mode

Pulse width tvp 1 2 23 H Fixed mode

12–H DE mode

Back porch tvb 1 22 23 H Fixed mode

122–H DE mode

tvp + tvb 24 H Fixed mode

2 24 254 H DE mode

Rise, fall tvrf ––10 ns –

CLK-DATA timing tds 8 ––ns –

DATA-CLK timing tdh 12 ––ns –

Rise, fall tdrf ––10 ns –

DE DE-CLK timing tes 8 ––ns –

CLK-DE timing teh 12 ––ns

Rise, fall terf ––10 ns

Note: All parameters should be kept in the specified range.

DATA

R0 ~ R5

G0 ~ G5

B0 ~ B5

NL8060BC26-17

12 Data Sheet EN0493EJ1V1DS00

(2) Input Signal Timing

tvp

Vsync

Display period (Note)

tvb tvf

tvd

thp

Hsync

Display period

thb thf

thd

(Note)

Note: These do not exist as signals.

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

(3) Input Signal Timing Chart

tch

CLK

Hsync

thsthv

0.5 VCC

0.7 VCC

0.5 VCC

0.3 VCC

tvrf

Vsync

CLK

thcsthch

0.5 VCC

0.7 VCC

0.5 VCC

0.3 VCC

thrf

Hsync

0.7 VCC

0.5 VCC

0.3 VCC

terf

(R0 ~ R5) 0.7 VCC

(G0 ~ G5) 0.5 VCC

DATA

tdrftdrf

tdhtds

Invalid

(B0 ~ B5) 0.3 VCC

terf

testehtesteh

Invalid

0.7 VCC

0.5 VCC

0.3 VCC

tcrf tcrf

NL8060BC26-17

14 Data Sheet EN0493EJ1V1DS00

a) Fixed timing mode

12 201200

(Note: Y = 0 to 599)

1000 1001 1023 0

CLK

Hsync

2 CLK (min.)

200 CLK (fixed)

1 CLK

800 CLK (fixed) 24 CLK

Invalid

Invalid D (0, Y) D (1, Y) D (798, Y) D (799, Y)

Hsync

Invalid

R0 ~ R5

G0 ~ G5

B0 ~ B5

24 25 623 624 0

623

624

321

24 H (fixed)

Hsync

Vsync

1 H (min.) 1 H

600 H (fixed)

1 H

Hsync

D (X, 0) D (X, Y) D (X, 598) D (X, 599) Invalid

(Note: X = 0 to 799)

Invalid

D (X, Y)

D (799, Y) Invalid

1 H (min.)

R0 ~ R5

G0 ~ G5

B0 ~ B5

R0 ~ R5

G0 ~ G5

B0 ~ B5

2 CLK (min.)

D (0, Y) D (1, Y)

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

b) DE mode

102

(Note: Y = 0 to 599)

CLK

Hsync

thb

1 CLK

800 CLK (fixed) thf

Invalid

Invalid D (0, Y) D (1, Y) D (798, Y) D (799, Y)

Invalid

R0 ~ R5

G0 ~ G5

B0 ~ B5

210

tvb

Hsync

Vsync

1 H

600 H (fixed)

D (X, 0) D (X, Y) D (X, 599) Invalid

(Note: X = 0 to 799)

Invalid D (0, Y) D (1, Y)

D (X, Y)

D (799, Y) Invalid

R0 ~ R5

G0 ~ G5

B0 ~ B5

thp

tvp tvf

NL8060BC26-17

16 Data Sheet EN0493EJ1V1DS00

DISPLAY POSITION

Normal scan (DPS = "Vcc")

D (0, 1) D (1, 1) - -------- D (X, 1) - - ------- D (798, 1) D (799, 1)

--------- ---------

D (0, Y) D (1, Y) - -------- D (X, Y) - - ------- D (798, Y) D (799, Y)

--------- ---------

D (0, 598) D (1, 598) - -------- D (X, 598) - - ------- D (798, 598) D (799, 598)

D (0, 599) D (1, 599) - -------- D (X, 599) - - ------- D (798, 599)

D (799, 599)

Reverse scan (DPS = "GND" or "Open")

D (799,599) D (798,599) - -------- D (X, 599) - - ------- D (1,599) D (0,599)

D (799,598) D (798,598) - -------- D (X, 598) - - ------- D (1,598) D (0,598)

--------- ---------

D (799, Y) D (798, Y) - -------- D (X, Y) - - ------- D (1, Y) D (0, Y)

--------- ---------

D (799, 1) D (798, 1) - -------- D (X, 1) - - ------- D (1, 1) D (0, 1)

D (799, 0) D (798, 0) - -------- D (X, 0) - - ------- D (1, 0)

D (0, 0)

The drawings below show the relationship between the scan direction and the viewing direction.

Normal scan Reverse scan

D (0, 0) D (799, 0)

D (0, 599) D (799, 599)

2D (0, 0) D (799, 0)

D (0, 599) D (799, 599) C

---

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

OPTICAL CHARACTERISTICS

Ta = 25°C Note 1

Item Symbol Condition Min. Typ. Max. Unit Remarks

Contrast ratio CR Note 2 150 300 ––Note 3

Luminance Lu max Note 2 200 280 –cd/m2Note 4

Luminance uniformity –max./min. ––1.4 –Note 5

Reference data

Item Symbol Condition Min. Typ. Max. Unit Remarks

Response time ton White to black 100% → 10% –15 50 ms Note 6

toff Black to white 0% → 90% –65 80 ms

Color gamut C at center, to NTSC –43 –%–

Horizontal

x+ CR > 10,

y = ±0°45 50 –deg. Note 7

x–CR > 10,

y = ±0°45 50 –deg.

Vertical

y+ CR > 10,

y = ±0°30 35 –deg.

y–CR > 10,

y = ±0°40 45 –deg.

Notes: 1. VCC = 3.3 V; IL = 5.0 mA rms; DPS = High at normal scan with recommended inverter.

2. Viewing angle:

x = ±0°,

y = ±0°, at center.

3. The contrast ratio is calculated by using the following formula.

Luminance with all pixels in "white"

Luminance with all pixels in "black"

The luminance is measured in darkroom.

4. The luminance is measured after 20 minutes from the module works, with all pixels in "white". Typical

value is measured after luminance saturation. The luminance is measured in darkroom.

1°

Photodetector (TOPCON BM-5A)

50 cm

LCD Module

Viewing

angle range

Contrast ratio (CR) =

NL8060BC26-17

18 Data Sheet EN0493EJ1V1DS00

5. The luminance uniformity is calculated by using following formula.

Maximum luminance

Minimum luminance

The luminance is measured at or near the five points shown below.

(160)Column

Line

(320) (480)

(120)

(240)

(360)

6. Definition of response time is as follows.

The photodetector output signal is measured when the luminance changes from white to black or from

black to white.

10%

100%

90%

ton toff

White

Black

Time

Display color

Luminance

range

7. Definitions of viewing angles are as follows.

Left

Right

Lower

Perpendicular

Upper

12 o’clock

x–

y–

Luminance uniformity =

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

RELIABILITY TEST

Test Items Test Conditions Notes

High temperature/humidity 50 ± 2°C, 85% relative humidity Note 1

operation 240 hours

Display data is black.

Heat cycle (operation) <1> 0°C ± 3°C … 1 hour Note 1

55°C ± 3°C … 1 hour

<2> 50 cycles, 4 hours/cycle

<3> Display data is black.

Thermal shock (nonoperation) <1> –20°C ± 3°C … 30 minutes Note 1

60°C ± 3°C … 30 minutes

<2> 100 cycles

<3> Temperature transition time within 5 minutes

Vibration (nonoperation) <1> 5 - 100 Hz, 19.6 m/s2 (2G) Note 1

1 minute/cycle, Note 2

X, Y, Z direction

<2> 120 times each direction

Mechanical shock <1> 539 m/s2 (55G), 11 ms Note 1

(nonoperation) X, Y, Z direction Note 2

<2> 5 times each direction

ESD (operation) 150 pF, 150 Ω, ±10 kV Note 1

9 places on a panel Note 3

10 times each place at one-second intervals

Dust (operation) 15 kinds of dust (JIS Z 8901) Note 1

Hourly 15 seconds stir, 8 times repeat

Notes: 1. Display function is checked by the same condition as the LCD module outgoing inspection.

2. Physical damage.

3. Discharge points are shown as follows.

NL8060BC26-17

20 Data Sheet EN0493EJ1V1DS00

GENERAL CAUTIONS

The figures and statements below are very important. Please be sure you understand their contents

completely.

This mark indicates that you will get hurt and/or the module will be damaged if you make a

mistake in operation.

This figure indicates that you will get hurt if you make a mistake in operation.

CAUTION

(1) Caution when taking out the module

<1> Pick up the pouch only, when removing the module from a carrier box.

(2) Cautions for handling the module

<1> As electrostatic discharges may break the LCD module, handle the LCD module with care against

electrostatic discharges.

<2> As the LCD panel and backlight element are made from fragile glass material, impact and

pressure to the LCD module should be avoided.

<3> As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals

for cleaning.

<4> Do not pull the interface connectors in or out while the LCD module is operating.

<5> Put the module display side down on a flat horizontal plane.

<6> Handle connectors and cables with care.

<7> When the module is operating, do not lose the CLK, Hsync, or Vsync signal. If any one of these signals

is lost, the LCD panel will be damaged.

<8> The torque for mounting screws should never exceed 0.294 N·m (3 kgf·cm).

<9> Don’t push or rub the surface of the LCD module.

If you do, scratches or rubbing marks may be left on the surface of the module.

<10> Do not give any stress to the interface connector.

(3) Cautions regarding atmosphere

<1> Dew-drop atmosphere must be avoided.

<2> Do not store and/or operate the LCD module in a high-temperature and/or high-humidity atmosphere.

Storage in an electro-conductive polymer packing pouch and in a relatively low-temperature atmosphere

is recommended.

<3> This module uses cold cathode fluorescent lamps. Therefore, the lifetime of the lamp is shortened

conspicuously at very low temperatures.

<4> Do not operate the LCD module in a high magnetic field.

(4) Cautions about module characteristics

<1> Do not apply any fixed-pattern data signals to the LCD module at product aging. Applying a fixed pattern

for a long time may cause image sticking.

<2> This module has retardation film, which may cause variation of the color hue at different viewing angles.

Nonuniformity may appear on the screen during high-temperature operation.

<3> A light vertical stripe may be observed, depending on the display pattern. This is not a defect or a

malfunction.

<4> Noise from the inverter circuit may be observed in the luminance control mode. This is not a defect or

a malfunction.

CAUTION

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

(5) Other cautions

<1> Do not disassemble and/or reassemble the LCD module.

<2> Do not readjust variable resistors or switches, etc.

<3> When returning the module for repair, etc., please pack the module properly so as to avoid damages. We

recommend using the original shipping packages.

<4> If a scan converter is used to convert the VGA signal to NTSC, it is recommended to use the frame memory

type, not the line memory.

The liquid crystal display has the following specific characteristics. These are not defects or

malfunctions.

The display condition of the LCD module may be affected by the ambient temperature.

The LCD module uses a cold cathode tube for backlighting. Optical characteristics, like luminance or

uniformity, will change over time.

Uneven brightness and/or small spots may be observed, depending on different display patterns.

NL8060BC26-17

22 Data Sheet EN0493EJ1V1DS00

OUTLINE DRAWING

FRONT SIDE (Unit: mm)

Notes : 1. The torque on mounting screws should never exceed 0.294 N·m (3Kgf·cm).

2. The values in parentheses are for reference.

11.5 MAX.

5.25 ±0.3

2.75 ±0.2

(6.3)

(88.3)

(3.7)

8.25 TYP.

5.25 ±0.3

2.75 ±0.2

CN1 DF9C-41P-1 V

185.1 ±0.5

(29.4)

166.6 ±0.3

(5.7) (5.1)

17 ±0.3

(5.7)(5.1)

243 ±0.5

235 ±0.3

(215.4) (BEZEL OPENING)

(4.8)

7.2 ±0.3

(211.2) (ACTIVE AREA) (9.3)

(2.8) (4) (2.9) (3.9)

11.5 MAX 8.25 TYP.

(8.1) (4.7)

132.6 ±0.3

(8.1)(4.7)

(158.4) (ACTIVE AREA)

146.6 ±0.3

(12.9)

(161.8) (BEZEL OPENING)

(2.9) (3.9)

8.25 TYP.

11.5 MAX.

(88.3)

5.25 ±0.3

2.75 ±0.2

(2.8) (4)

5.25 ±0.3

2.75 ±0.2

4-CPIMS × M2 × L4

2- 3.5

(1.8)

(3.15)

(ACTIVE AREA)

(MODULE CENTER)

2-R1.75

NL8060BC26-17

Data Sheet EN0493EJ1V1DS00

OUTLINE DRAWING

REAR SIDE (Unit: mm)

2000A483324KMADE IN JAPAN

ES2228423

K2000A483324

NL8060BC26-17

BHR-03VS-1 (JST)

(4.5)

(5)

(3.4)

(6.8)(8)

(5)

(5)(6.8)

(5)

(3.4)(3.4)

(4.5)

(2.4)(6.6)

(2.4)

(5.6)

2.3 ±0.5

4.0 ±0.5

(5)(5.3) (16)(22)

88.9 ±0.5 (5.3)(5)

1 PIN: COLD: 2, 3 PINS: HOT

60 ±10

DF9C-41P-1 V

NION VOLTEGE

CAUTION

RISK OF ELECTRIC SHOCK.

DISCONNECT THE ELECTRIC

POWER BEFORE SERVICE.

Name

104DLM-

∗ ∗ ∗ − ∗

Pal No.

THE TFT COLOR LCD

PANEL CONTAINS COLD CATHODE

FLUORESCENT LAMPS. PLEASE

FOLLOW LOCAL ORDINANCES

OR REGULATIONS FOR THEIR

DISPOSAL.

NL8060BC26-17

No part of this document may be copied or reproduced in any form or by any means without the

prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any

errors which may appear in this document.

NEC Corporation does not assume any liability for infringement of patents, copyrights or other

intellectual property rights of third parties by or arising from use of a device described herein or

any other liability arising from use of such device. No license, either express, implied or

otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC

Corporation or others.

While NEC Corporation has been making continuous effort to enhance the reliability of its

electronic components, the possibility of defects cannot be eliminated entirely. To minimize risks

of damage or injury to persons or property arising from a defect in an NEC electronic component,

customers must incorporate sufficient safety measures in its design, such as redundancy, fire-

containment, and anti-failure features. NEC devices are classified into the following three quality

grades:

"Standard," "Special," and "Specific". The Specific quality grade applies only to devices

developed based on a customer designated "quality assurance program" for a specific

application. The recommended applications of a device depend on its quality grade, as indicated

below. Customers must check the quality grade of each device before using it in a particular

application.

Standard: Computers, office equipment, communications equipment, test and measurement

equipment, audio and visual equipment, home electronic appliances, machine tools,

personal electronic equipment and industrial robots

Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems,

anti-disaster systems, anti-crime systems, safety equipment and medical

equipment (not specifically designed for life support)

Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control

systems, life support systems or medical equipment for life support, etc.

The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets

or Data Books. If customers intend to use NEC devices for applications other than those

specified for Standard quality grade, they should contact an NEC sales representative in

advance.

(Note)

(1) "NEC" as used in this statement means NEC Corporation and also includes its majority-

owned subsidiaries.

(2) "NEC electronic component products" means any electronic component product developed

or manufactured by or for NEC (as defined above).

DE0202