Computer Cable DB25P Male to DB25P Male Specifications 1. Molded connector end requirements : A) Inner mold using PE B) Aluminum foil wrcp to connector C) PVC - 45P, Platinum gray 2. Cable : [28AWG (7 / 0.12) * 25C + AL / MY + DW (7 / 0.16)] TlN Insulation : PP, OD = o0.78 0.03mm Colour : COLOUR CODE Jacket : PVC, OD = o7.0 0.15mm Colour : Platinum gray 3. Thumbscrew : Male 4mm x 47mm, Nickel plating 4. Connectors : DB25P Pin Male, Nickel plating, Insulator Color : Blue Dimensions : Inches (Millimeters) www.element14.com www.farnell.com www.newark.com Page <1> 11/06/12 V1.0 Computer Cable DB25P Male to DB25P Male Pin Outs Db25 Male Wire Color Ob25 Male Black 2 Db25 Male Wire Color Ob25 Male 0825 Male Wire Color Ob25 Male 10 !Ray 10 19 Ught-Green 19 Pink 20 Brown 2 11 Black/White 11 20 3 Red 3 12 Brown / White 12 21 Pink / Black 21 4 Orange 4 13 Red / White 13 22 Gray / Black 22 5 Yellow 5 14 Orange / White 14 23 Orange / Black 23 6 Green 6 15 Yellow / Black 15 24 Red / Black 24 7 Blue 7 16 Green / White 16 25 Green / Black 25 8 Purple 8 17 Blue / White 17 Shell 9 White 9 18 Purple / White 18 Shell Part Number Table Description DB25P Male to DB25P Male LENGTH (L) Part Number 72 1 [1,829 25.4] SPC19935 120 2 [3,048 50.8] SPC19929 300 3 [7,625 76.2] SPC19932 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <2> 11/06/12 V1.0