DO NOT
SCALE FROM
THIS PRINT
.100 2.54
REF
(No. OF POSITIONS x .100[2.54])
-
.010
+
.015
2
MAX SWAY
(TYP)
[ ]
+0.38
- 0.25
C
FIG. 1
BTSW-1XX-XX-X-S SHOWN
.100 2.54
REF
.025
SQ
0.64
REF (TYP)
.100 2.54
REF (TYP)
2
MAX SWAY
(TYP)
01
"C"
"A"
±.005
(SEE NOTE 5 & 6)
"B"
±.005
(SEE NOTE 5 & 6)
90°
(TYP)
REF
C
C
TSM-50-SV
T-1S6-XX-XXX-2
BTSW-XXX-XX-X-S-XX-XX
NO OF POSITIONS
-1: -01 THRU -50
-2: -02 THRU -25 (SEE FIG. 3, SHEET 2)
TERMINAL SPACE
-1: .100[2.54 (FILL EVERY POSITION)
-2: .200[5.08] (FILL EVERY OTHER POS
STARTING AT -01 AND ENDING
IN LAST POS)
-T: MATTE TIN CONTACT AND TAIL
-F: FLASH GOLD, 3 Au / 50 Ni MIN
ON CONTACT,MATTE TIN ON TAIL
(USE T-1S6-XX-GF-2)
PLATING SPECIFICATION
-S: SINGLE
ROW SPECIFICATION
-LL: LOCKING LEAD
(SEE FIG. 2, SHEET 2)
OPTIONS
XX INDICATES POSITION
TO BE OMITTED; LEAVE
BLANK FOR NO OPTION
POLARIZATION
TERMINAL SPECIFICATION
-01: .050[1.27] PROFILE
*-02: .060[1.52] PROFILE
(SEE TABLE 1)
PT-1-24-01-60 (USE TP-03)
(SEE NOTE 7)
C
* = NOT RELEASED
* = NOT RELEASED
TUBE VIEW
A
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3] 2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
.025 [.64] SQ. SINGLE ROW, DOUBLE -RA POST ASM
BY:
BTSW-XXX-XX-X-S-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
J. BROWNING
04/27/2010
2
1
SHEET SCALE: 3:1
F:\DWG\MISC\MKTG\BTSW-XXX-XX-X-S-XX-XX-MKT.SLDDRW
MATERIAL:
BODIES:
DUPONT CRASTIN SK652 FR, COLOR: BLACK
TERMINALS:
PHOSPHOR BRONZE
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. ALL DIMENSIONS TO BE ABOUT CL WITHIN ±.005[0.13].
3. MINIMUM PUSHOUT FORCE: 3 lbs.
4. MAXIMUM CUT FLASH: .020[0.50].
5. MEASURE FROM THE TIPS OF THE TERMINALS.
6. MEASURE AT BOTH ENDS OF PART.
7. PARTS TO BE PACKAGED IN TUBES FOR 4-50 POSITIONS (.100 [2.54]
PITCH) OR 2-25 POSITIONS (.200 [5.08] PITCH), OTHERWISE BULK PACKAGED.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION A
"D"
REF
"E"
IN-PROCESS 1
ODD POSITION PART
01
C
L
EVEN POSITION PART
01
C
L
.008 0.20
(TYP)
.017
MIN
0.43
(TYP)
.040 1.02
FIG. 2
BTSW-1XX-XX-X-S-LL SHOWN
(SAME AS FIG. 1 EXCEPT AS SHOWN)
.200 5.08
FIG. 3
BTSW-210-XX-X-S SHOWN
(SAME AS FIG. 1 EXCEPT AS SHOWN)
LOCKING LEAD OPTION
■ = CRIMP LOCATION
IF CRIMP POSITION IS POLARIZED, MOVE ONE POSITION TOWARD PIN 1
C
* = NOT RELEASED
SHEET OF
.025 [.64] SQ. SINGLE ROW, DOUBLE -RA POST ASM
BY:
BTSW-XXX-XX-X-S-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
J. BROWNING
04/27/2010
2
2
SHEET SCALE: 3:1
REVISION A
F:\DWG\MISC\MKTG\BTSW-XXX-XX-X-S-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322