b_frame_A3_P_AM_T 9 8 10 | 9 | 8 7 6 5 4 3 2 1 FEATURES FEATURES SELECTION GUIDE FRICTION LOCKS CIRCUIT DUAL CENTER SHEET DUAL CENTER SIZE @ @ Dee SLOTS POLARIZATION @Pess NO NA NA YES NA NA 4 2-3 NA YES YES NA NA a N.A NA YES NA NA Saif a | NA NA YES NA YES N.A N.A YES YES NA qJ 6 4-5 Heit (2)CENTER LOCK NA YES YES NA NA > NA YES YES NA YES NA NA YES YES YES NA NA YES YES NA 8 TO 12 6-7 ()DUAL SIDE SLOTS NA YES YES NA NA NA YES YES NA YES (4) CENTER POLARIZATION YES NA YES YES NA 14 TO 50 8-1 YES NA YES YES YES (1) DUAL LOCKS (5) PEGS aas QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE BS 8) MY) UNLESS: SPECIFIED) MM ONLY NTS | METRIC | Cleroyection = = = mm INCH DRAWN BY DATE TITLE in SS S)Z\G/-0 [CPLACES|E---_[e--- GMENARLY 2015/05/22 MILLIGRID g F 3 PLACES|t--- |4+--- CHECKED BY DATE 2MM PITCH, SMT aims |SIN/0 [ZPLACES|0.20_[#--- (GOH 2015/09/21] = VERTICAL SHROUDED HEADER Th S = ~ = w 1 PLACE += +--- APPROVED BY DATE QHSsz) \Q/-0 [opcace = [f= _KHLIM 2015/09/22 Wd s 4 ANGULAR +30 MATERIAL NO. DOCUMENT NO. SHEET NO. Wo eet DRAFT WHERE APPLICABLE|__ SEE TABLE SD-87832-0001 1 OF 12 Oe A =e _ MUST REMAIN SIZE) THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A in WITHIN DIMENSIONS INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Rev. G 2012/01/11 Ps 4 | 3 | 2 | 140 | 9 | 8 7 | 6 | 5 4 3 2 4 4 CIRCUITS [y}~4-_ 4 ~+ YY 3 RIB LOCATION VARY ct wa _ __ / DEPENDING ON CKT SIZES - = 450 5.00 6,30 CKT #17 = typ[2.00] ~4 _ Z | f ISO VIEW OF HEADER H (3.90) WITH ONLY DUAL SLOTS 4.70 | | | 640 2 6, G L (COPLANARITY) Z [2.00] J I= 050005 SECTION Z-Z = 298) 4.60 - 6.35 I | poe TYP Ld r l { 150 NOTES: __F-- } | 275 f 1. MATERIALS: (9.05) (TYP) HOUSING & CAP: 30% GF, NYLON, UL94V-0, COLOR: BLACK pe PIN: 0.50MM SQ PHOSPHOR BRONZE | |_| 2. FINSHES: REFER TO PLATING OPTIONS 1.00 _ _ 3. PRODUCT SPECIFICATION: PS-87831-027 tt (TYP) 4. PACKAGING SPECIFICATION: RECOMMENDED PCB LAYOUT TUBE: PK-87831-001 , TAPE AND REEL: PK-87831-300 VIEW FOR HEADER WITH CAP 5. MATES WITH: A. MOLEX CRIMP RECEPTACLE HOUSING: 51110 SERIES AND CRIMP TERMINAL: 50394 SERIES SAS] |Quality] GENERAL TOLERANCES DIMENSION STYLE SCALE | DESIGN UNITS THIRD ANGLE B. MOLEX 2MM MILLIGRID DUAL ROW IDT: 87568 SERIES S= S| |sympo_s} (UNLESS Sree SRAWN MM ONLY _NTS METRIC | CI PROJECTION . Sos mm C. MOLEX 2MM MILLIGRID DUAL ROW RECEPTACLE: p= RR|z W-0 TPLACESIE TE MENARLY 9015/05/22 MILLIGRID 79107 (GOLD PLATED), 78787 (TIN PLATED) mo = 3 PLACES Ea=> TE === CHECKED BY TE 2MM PITCH, SMT Ze\COPLANARITY IS TO BE MEASURED BY RESTING THE SOLDERTAIL ON | 14> &I\G/=0 7 PLACES|t0.20 |t--= ICG0H 2015/09/21 VERTICAL SHROUDED HEADER A GAUGE SURFACE WwW S =s=/8 4 PLACE [--- +--- APPROVED BY DATE J 7. BEND DEPRESSION ON SMT TAIL IS ACCEPTABLE SO LONG AS IT go == \(/=0 [O PLACE E=-- [=== HLM 2015/09/22 mo ex DOES NOT AFFECT THE OVERALL COPLANARITY WSoZoer ANGULAR + 3 [MATERIAL NO. DOCUMENT NO. SHEET NO. =x - - 8. TOP SURFACE OF CAP TO BE FLAT FOR THE PURPOSE OF Wo ro DRAFT WHERE APPLICABLE ace TABLE SD-87832-0001 2 OF 12 PICK & PLACE BY VACUUM SUCTION NOZZLE = MUST REMAIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A w WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 8 7 | 6 | 5 | 4 | 3 | 2 | 1 Rev. G 2012/01/11 940 9 8 7 | 6 | 5 4 3 2 4 b_frame_A3_P_AM_T 9 8 7 Rev. G 2012/01/11 4 CIRCUITS CKT | ASSY P/N ASSY P/N ASSY P/N | T&R PLATING DUAL | CENTER PEGS DIMENSION F FRICTION LOCKS SIZE | WITHOUT CAP | WITH CAP wiTH CAP OPTIONS | OPTIONS SIDE | POLARIZATION A 5 c D E F G H IN TUBE IN TUBE IN T&R SEE DUAL | CENTER | SLOTS (COPLAN) SHEET 12) 87832-0460 | 87832-0462 | 87832-5162 1 1 87832-0420 | 87832-0422 | 87832-5122 1 2 NA NA YES NA NA 0.10 87832-0421 | 87832-0423 | 87832-5123 1 3 4 | 87832-0470 | 87832-0472 | 87832-5172 1 4 6.65 4.85 2.00 NA NA 5.00 3.6020.20 87832-0410 | 87832-0408 | 87832-0406 4 2 NA . . 87832-0411 | 87832-0409 | 87832-0407 4 3 YES | YES NA NA 0.10 E 87832-0404 NA NA NA 2 NA YES YES N.A NA 0.10 D c B PLATING OPTIONS: as al SS 87 Jauality] GENERAL TOLERANCES DIMENSION STYLE SCALE] DESIGN UNITS THIRD. ANGLE 1 - 0.05-0.13um/2-5uin GOLD IN CONTACT AREA AND SSS! Isympois| (UNLESS SPECIFIED) MM ONLY NTS METRIC CJ PROJECTION 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER oS5 mm INCH | DRAWN BY DATE TITLE 1.27um/50uin MIN. NICKEL OVERALL. in 1B \Y=-0 [ZPLACESE---_[$--- MENARLY 2015/05/22 MILLIGRID 2 - 0.38um/15uin MIN, GOLD IN CONTACT AREA AND g a 3 PLACES|t--- _[+--- _|CHECKED BY DATE 2MM PITCH, SMT 4.88um/75uin MIN, MATTE TIN IN SOLDER TAIL AREA OVER ns 2 WW/-0 2 PLACES 0.20 2 Con = 01 109/24 VERTICAL SHROUDED HEADER 1.27um/50uin MIN. NICKEL OVERALL. Wot. Za OTT A Ae sun OS SS =) |W/-0 [oprace H-_|--- KHL 2015/09/22 m x 3 - 0.76um/30uin MIN. GOLD IN CONTACT AREA AND t. 502 = oe 4.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER 42208 ANGULAR = SEE TABLE SD-87832-0001 3 0F 2 4.27um/S0uin MIN. NICKEL OVERALL Wo & ro DRAFT WHERE APPLICABLE , on , fei Ot =e MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 4 - 250um/100uin MIN, MATTE TIN OVER 1.25um/50uin MIN. NICKEL OVERALL. A iw WITHIN DIMENSIONS (A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION 6 | 5 | 4 | 3 | 2 | 140 | 9 | 8 7 | 6 | 5 4 3 2 6 CIRCUITS [y} RIB LOCATION VARY 2 / DEPENDING ON CKT CKT #2 ra [f] I SIZES | Pa 1 rT 2.00 ae Bs [ 450 5.00 39 CKT #1 * fe TYP Yo ! yr | VIEW FOR HEADER WITH | ] 470 io H (3.90) ONLY DUAL SLOTS {A 160 1 | gc ZN (COPLANARITY) F 1 1.20 TYP Y! _ 0.50 +0.05 SQ 220 (2x) } 200 [2.00] =| TYP SECTION Y-Y 100 | YP) TYP AA HH PLE LL- 90.85+008 (2x) cryP) |= ae na Sx (0.65) 4.60 [ TYP [~ 6.35 $1.00+005 (2X) + Lf CI / PIN: 0.50MM SQ PHOSPHOR BRONZE 2. FINISHES: REFER TO PLATING OPTIONS 4 |S Tisa FRE 2.13 NOTES: E 275 1. MATERIALS: (9.05) | (TYP) HOUSING & CAP: 30% GF, NYLON, UL94V-0, COLOR: BLACK | EH 3. PRODUCT SPECIFICATION: PS-87831-027 L 1.00 4, PACKAGING SPECIFICATION: > TUBE: PK-87831-001 , TAPE AND REEL: PK-87831-300 VIEW FOR HEADER WITH CAP RECOMMENDED PCB LAYOUT 5. MATES WITH: A. MOLEX CRIMP RECEPTACLE HOUSING: 51110 SERIES AND CRIMP TERMINAL: 50394 SERIES S28) Quality] GENERAL TOLERANCES DIMENSION STVTE SCALE | DESIGN UNITS THIRD. ANGLE B. MOLEX 2MM MILLIGRID DUAL ROW IDT: 87568 SERIES SSS |symBots| (UNLESS Eo un MM ONLY NTS METRIC |OC] PROJECTION Sos mm C. MOLEX 2MM MILLIGRID DUAL ROW RECEPTACLE: plz W-0 T PLACES IE TE IGMENARL Y 9015/05/22 MILLIGRID 79107 (GOLD PLATED), 78787 (TIN PLATED) e = 3 PLACES hose PRoa> TT ICHERKED BY DATE 2MM PITCH, SMT /2\COPLANARITY IS TO BE MEASURED BY RESTING THE SOLDERTAIL ON | 145 &ING/=O0 [2 PLACES [+0.20_|[+--- _|CGOH 2015/09/24 VERTICAL SHROUDED HEADER A GAUGE SURFACE WW S = =/# 1 PLACE [--- === APPROVED BY DATE 7. BEND DEPRESSION ON SMT TAIL IS ACCEPTABLE SO LONG AS IT 2a Sz &/-0 0 PLACE [---_ [#--- HL IM 2015/09/22 DOES NOT AFFECT THE OVERALL COPLANARITY WoZae ANGULAR + 3 MATERIAL NO. DOCUMENT NO. SHEET NO. =<o - - 8. TOP SURFACE OF CAP TO BE FLAT FOR THE PURPOSE OF nea DRAFT WHERE APPLICABLE|_SEE TABLE SD-87832-0001 4 OF 12 PICK & PLACE BY VACUUM SUCTION NOZZLE Oe MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A ra WITHIN DIMENSIONS JA S|INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 1 Rev. G 2012/01/1140 9 8 7 | 6 | 5 4 3 2 4 6 CIRCUITS g | CKT |ASSY P/N ASSY P/N ASSY P/N | T&R PLATING | action Locks | DUAL | CENTER PEGS DIMENSION SIZE | WITHOUT CAP | WITH CAP WITH CAP [OPTIONS | OPTIONS SIDE | POLARIZATION A B c D E F G H IN TUBE IN TUBE IN T&R SEE DUAL | CENTER| SLOTS (COPLAN) SHEET 12) 87832-0660 | 87832-0662 | 87832-5262 1 1 87832-0620 | 87832-0622 | 87832-5222 1 2 NA NA NA 87832-0621 | 87832-0623 | 87832-5223 1 3 YES YES 0.10 | 3.6020.20 87832-0670 | 87832-0672 | 87832-5272 1 4 6 [87832-0612 | 87832-0616 | 87832-0614 4 2 NA NA YES NA NA 010 |3.60:0.20 87832-0613 87832-0617 | 87832-0615 4 3 NA NA YES YES NA 8.65 6.85 4,00 NA 2.00 7.00 . E 87832-0624 | 87832-0626 | 87832-0628 4 2 YES 87832-0625 | 87832-0627 | 87832-0629 4 3 NA | YES NA NA 0.10 | 3.6020.15 87832-0610 | 87832-0608 | 87832-0606 4 2 0.10 87832-0611 | 87832-0609 | 87832-0607 z 3 NA YES YES NA YES 3.60+0.20 87832-0604 NA NA NA 2 NA YES YES NA YES 0.10 | 3.6020.20 D Cc B PLATING OPTIONS: SS ano SS 87 Jauality] GENERAL TOLERANCES DIMENSION STYLE SCALE] DESIGN UNITS THIRD. ANGLE 1- 0,05-0.13um/2-5uin GOLD IN CONTACT AREA AND SSS! Isympois| (UNLESS SPECIFIED) MM ONLY NTS METRIC CJ PROJECTION 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER eo5 mm INCH | DRAWN BY DATE TITLE MILLIGRID 1.27um/50uin MIN. NICKEL OVERALL. no 1S \G/=0 4 PLACES |t--- [4--- MENARLY 2015/05/22 2 - 038um/15uin MIN. GOLD IN CONTACT AREA AND g a 3 PLACES|t--- _[+--- _|CHECKED BY DATE 2MM PITCH, SMT 1.88um/75uin MIN, MATTE TIN IN SOLDER TAIL AREA OVER ns 2 WW/-0 2 PLACES 0.20 Con = 01 109/24 VERTICAL SHROUDED HEADER i Wwos = -- _ 1.27um/50uin MIN. NICKEL OVERALL. =]a x = A eon AASS =! \\G/=0 [oplace E-- _[t-- _KHLIM 2015/09/22 molex 3 - 0.76um/30uin MIN. GOLD IN CONTACT AREA AND I. 50s . Wo SAk ANGULAR +30 MATERIAL NO. DOCUMENT NO. SHEET NO. 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER IZz=eOor SD-87832-0001 4.27um/50uin MIN. NICKEL OVERALL Woe ro DRAFT WHERE, APPLICABLE| SEE TABLE = 2 OF 12 . en . . fei Ot =e MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 4 - 2.50um/100uin MIN. MATTE TIN OVER 1.25um/SOuin MIN. NICKEL OVERALL. A et WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | Rev. G 2012/01/11 6 | 3 | 4 | 3 | 2 | 'PIN: 0.50MM SQ PHOSPHOR BRONZE 2. FINISHES: REFER TO PLATING OPTIONS . PRODUCT SPECIFICATION: PS-87831-027 uJ 1.00} =| 40 | 9 | 8 7 | 6 | 5 | 4 3 2 4 8 TO 12 CIRCUITS A +|_ RIB LOCATION VARY B J DEPENDING ON CKT SIZES CKT #2 Bt DE Bid mj 450 5.00 6.30 | aX AS |_| i CKT #1 = __ TYP CIRCUIT Xx IDENTIFICATION nV | 4.70 H (3.90) ISO VIEW OF HEADER WITH CENTER 640 2 24 POLARIZATION AND DUAL SIDE SLOTS _1 G a0 TWP (COPLANARITY) TYP [2.00] 7 L 050400550 2.20 on J 100 2.00 _ SECTION X-X me] (TYP) L+ $0.85+0.05 (2X) | | | 4.60 gli "Pe 6 #1.0020.05 (2x) 4 | | | f 1.50 L -| t V 2.13 roa NOTES: F TT. (TYP) 4, MATERIALS: (9,05) __] HOUSING & CAP: 30% GF, NYLON, UL94V-0, COLOR: BLACK } 4. PACKAGING SPECIFICATION: TUBE: PK-87831-001 , TAPE AND REEL: PK-87831-300 VIEW FOR HEADER WITH CAP RECOMMENDED PCB LAYOUT 5. MATES WITH: A. MOLEX CRIMP RECEPTACLE HOUSING: 51110 SERIES b_frame_A3_P_AM_T 9 8 7 Rev. G 2012/01/11 ps s | 3 2 . = a a QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE AND CRIMP TERMINA's 20394 SERIES SSS] |sympots| (UNLESS SPECIFIED) MM_ ONLY NTS | METRIC |QCleRoJECTION B. MOLEX 2MM MILLIGRID DUAL ROW IDT: 87568 SERIES Bas mm INCH 1 DRAWN BY DATE THLE C. MOLEX 2MM MILLIGRID DUAL ROW RECEPTACLE: in == 8)2/\G/-0 [CPLACES|E--- _[E--= MENARLY 2015/05/22 MILLIGRID 79107 (GOLD PLATED), 78787 (TIN PLATED) a r 3 PLACES|E--- |+--~ [CHECKED BY DATE 2MM PITCH, SMT /O\COPLANARITY IS TO BE MEASURED BY RESTING THE SOLDERTAIL ON | aut 5 &ING/=0 [2 PLACES 0.20 [4 CoO Cs ~ 2015/09/21 VERTICAL SHROUDED HEADER A GAUGE SURFACE Wo = =o TPLACE [Eoo7 too 1 YN =I = 7. BEND DEPRESSION ON SMT TAIL IS ACCEPTABLE SO LONG AS IT <0ESE O [0 PLACE |e + HL IM = 2013/09/22 moiex DOES NOT AFFECT THE OVERALL COPLANARITY HneZoe ANGULAR + 3 , ; 8. TOP SURFACE OF CAP TO BE FLAT FOR THE PURPOSE OF riso& DRAFT WHERE APPLICABLE| SEE TABLE SD-87832-0001 o OF 12 . fei Ot =e MUST REMAIN 22E| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX PICK & PLACE BY VACUUM SUCTION NOZZLE A a WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION | 110 9 8 7 6 5 4 3 2 1 8 TO 12 CIRCUITS CKT |ASSY P/N ASSY P/N ASSY P/N | T&R PLATING | eriction Locks | DUAL | CENTER PEGS DIMENSION F | size |wITHOUT CAP | WITH CAP WITH CAP OPTIONS | OPTIONS SIDE | POLARIZATION A B C D E F G H IN TUBE IN TUBE IN T&R (SEE DUAL | CENTER | SLOTS (COPLAN) SHEET 12) 87832-0860 | 87832-0862 | 87832-5362 1 1 87832-0820 | 67832-0822 | 87832-5322 7 2 NA wa | yes VES VES oto {3602020 87832-0821 | 87832-0823 | 87832-5323 1 3 . " : 0080. 87832-0870 | 87832-0872 | 87832-5372 1 Z 87832-0812 | 87832-0816 | 87832-0814 4 2 . . YES NA 0.10 [3.60#0.20 8 - - - NA NA | YES 10.65 8.85 6.00 NA 4.00 9.00 = 87832-0824 | 87832-0826 | 87832-0828 Z 2 NA ves | YES NA NA 010 (3.602015 - 87832-0825 | 87832-0827 | 87832-0829 4 3 " , nw 87832-0810 | 87832-0808 | 87832-0806 Z 2 NA ves | YES NA YES 010 |3.6020.20 87832-0811 | 87832-0809 | 87832-0807 4 3 87832-0804 NA NA NA 2 NA YES | YES NA YES 0.10 |3.60+0.20 87832-1060 | 87832-1062 | 87832-5462 1 1 87832-1020 | 87832-1022 | 87832-5422 1 2 ono (3.6080.20 . 6020. a7e32-1021 | 87632-1023 | Seeae 382 : 3 NA NA | YES YES YES 87832-1070 | 87832-1072 | 87832-5472 1 Z o| 1 [87832-1012 | 87832-1016 | 87832-1014 Z 2 NA NA | YES YES NA | 12.65 10.85 8.00 NA 6.00 11.00 0.10 | 3.6020.20 87832-1024 | 87832-1026 | 87832-1028 4 2 NA YES | YES NA NA 87832-1025 | 87832-1027 | 87832-1029 4 3 O10 [6080.15 87832-1010 | 87832-1008 | 87832-1006 4 2 NA yes | YES NA YES 010 |360s020 87832-1011 | 87832-1009 | 87832-1007 4 3 _ 87832-1004 NA NA NA 2 NA YES | YES NA YES 0.10 | 3.60:0.20 87832-1260 | 87832-1262 | 87832-5562 1 41 87832-1220 | 87832-1222 | 87832-5522 1 2 NA NA | YES YES YES oo (3.6040.20 87832-1221 | 87832-1223 | 87832-5523 1 3 . 0080. c} 4 [87832-1270 _| 87832-1272 _| 87832-5572 1 4 87832-1224 | 87832-1226 | 87832-1228 1 2 NA yes | YES NA na | 1465 12.85 10.00 NA 8.00 13.00 010 | 3.600.145 87832-1225 | 87832-1227 | 87832-1229 1 3 87832-1210 | 87832-1208 | 87832-1206 1 2 NA ves | YES NA YES 010 [3600.20 87832-1211 | 87832-1209 | 87832-1207 1 3 : 0080. I 87832-1204 NA NA NA 2 NA YES | YES NA YES 0.10 | 3.60+0.20 B PLATING OPTIONS: . S87 Jouatsy) GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS Od THIRD ANGLE 1- 0,05-0.13um/2-5uin GOLD IN CONTACT AREA AND SSS) |sympo_s| (UNLESS SPECIFIED) MM ONLY NTS METRIC PROJECTION 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER ws mm INCH | DRAWN BY DATE |TITLE 1.27um/S0uin MIN. NICKEL OVERALL. in SSB \G/=0 [ZPLACES|E--- [E-== |GMENARLY 2015/05/22 MILLIGRID 2 - 0.38um/15uin MIN. GOLD IN CONTACT AREA AND og a 3 PLACES|+--- _|+--- _|CHECKED BY DATE 2MM PITCH, SMT 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER awn Z \/-0 [2 PLACES 0.20 2 CoO oy 2019 109/21 VERTICAL SHROUDED HEADER 1.27um/S0uin MIN, NICKEL OVERALL. Wass =a 1 PLACE [7-7 [E7no A AASS=) |\6/-0 [0 Place E- _[--> _KHLIM 2015/09/22 moex 3 - 0.76um/30uin MIN. GOLD IN CONTACT AREA AND t7SES a SET WO 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER WeSZSe ANGULAR + 3 to7um/S0uin MIN. NICKEL OVERALL Doete DRAFT WHERE APPLICABLE|_SEE TABLE SD-87832-0001 7_OF 12 2 7umovain : Mm gt <x SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 4 - 250um/100uin MIN. MATTE TIN OVER 1.25um/S0uin MIN. NICKEL OVERALL. A in WITHIN DIMENSIONS /A S|INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 Rev. G 2012/0171 6 | 5 | 4 | 3 | 2 1b_frame_A3_P_AM_T 9 8 7 Rev. G 2012/01/11 6 | 3 | 4 | 3 | 2 | ' 14 TO 50 CIRCUITS RIBS LOCATIONS VARY eo r | 0.Soly 6.35 DEPENDING ON CKT SIZES L100 - CKT #2 Cc 2.00 | 450 5,99 6.30 LA Ll (9.05) L CKT #4 1a] oy pz bg og oa 1a] oy LU E CIRCUIT D VIEW FOR HEADER WITH CAP IDENTIFICATION D W I |, 4.70 | H (3.90) - l 6.40 7.60 \ von { D = Boon a= rye oe nt, | a Hy L 60.85 +0.08(2x) 06s) SECTION W-W [ TYP POLARIZATION AND DUAL SIDE SLOTS 7 TYP) YP) = E | c E 150 91.00+005 (2x) | | | | | | | | | I I [ NOTES: 1. MATERIALS: i Roy HOUSING & CAP: 30% GF, NYLON, UL94V-0, COLOR: BLACK 2.13 275 - PIN: 0.50MM SQ PHOSPHOR BRONZE } (TYP) 2. FINSHES: REFER TO PLATING OPTIONS } 3. PRODUCT SPECIFICATION: PS-87831-027 E 4. PACKAGING SPECIFICATION: eE B TUBE: PK-87831-001 , TAPE AND REEL: PK-87831-300 RECOMMENDED PCB LAYOUT 5. MATES WITH: A. MOLEX CRIMP RECEPTACLE HOUSING: 51110 SERIES AND CRIMP TERMINAL: 50394 SERIES S28) [Quality] GENERAL TOLERANCES DIMENSION STVE STe | omeTai. 6 (OC) SHIRD. ANGLE B. MOLEX 2MM MILLIGRID DUAL ROW IDT: 87568 SERIES == 5] |symBots} (UNLESS eG ORAWH MM ONLY _NIS METRIC SI PROJECTION | ; Ses mm C. MOLEX 2MM MILLIGRID DUAL ROW RECEPTACLE: in Riz \W/=0 % PLACES |+--- IGMENARL Y 2045/05/22 MILLIGRID 79107 (GOLD PLATED), 78787 (TIN PLATED) my = 3 PLACES Ho=> |b o=> (CHECKED BY DATE 2MM PITCH, SMT /A\COPLANARITY IS TO BE MEASURED BY RESTING THE SOLDERTAIL ON | 14 >> \/=0 2 PLACES|+0.20 [+--- _ |CGOH 2015/09/21 VERTICAL SHROUDED HEADER A GAUGE SURFACE We S_=|4 TPLACE [E--- |[t--- [APPROVED BY _ODATE | 7. BEND DEPRESSION ON SMT TAIL IS ACCEPTABLE SO LONG AS IT a2S= \@/-0 [o PLACE E--- [=== HL IM 2015/09/22 momex A DOES NOT AFFECT THE OVERALL COPLANARITY WeZoer ANGULAR + 3 SEE TABLE DOCUMENT SD 87832-0001 SHEET NO. 8 TOP SURE ACE OF CAP TO BE PEAT FOR THE PURPOSE OF wis o ORAPT MUST REMAIN Oe PSE THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY 70 WOLEX PICK & PLACE BY VACUUM SUCTION NOZZLE A i WITHIN DIMENSIONS [A JINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION40 9 8 7 | 6 | 5 | 4 3 2 4 Rev. G 2012/01/11 14 TO 24 CIRCUITS CKT |ASSY P/N ASSY P/N ASSY P/N. | T&R PLATING DUAL CENTER PEGS DIMENSION FRICTION LOCKS SIZE | WITHOUT CAP | WITH CAP WITH CAP [OPTIONS | OPTIONS SIDE | POLARIZATION A B C D E FE G H IN TUBE IN TUBE IN T&R SEE puAL | CENTER | SLOTS (COPLAN) SHEET 12) 87832-1460 | 87832-1462 | 87832-5662 1 1 87832-1420 | 87832-1422 | 87832-5622 1 2 14 87832-5623 1 YES N.A YES YES YES 16.65 14.85 12.00 8.00 10.00 15.00 0.15 | 3.6020.20 87832-1421 87832-1423 35555-9555 5 3 87832-1470 | 87832-1472 | 87832-5672 1 4 87832-1412 87832-1416 | 87832-1414 1 2 YES NA YES YES NA 0.15 | 3.60#0.20 87832-1660 | 87832-1662 | 87832-5762 1 1 87832-1620 | 87832-1622 | 87832-5722 1 2 16 87832-1671 87832-1623 87832-5723 4 3 YES NA YES YES YES 18.65 16.85 14.00 10.00 12.00 17.00 0.15 3.6020.20 87832-1670 | 87832-1672 | 87832-5772 1 4 87832-1612 87832-1616 | 87832-1614 1 2 YES NA YES YES NA 0.15 | 3.6020.20 87832-1860 | 87832-1862 | 87832-5862 1 1 87832-1820 | 87832-1822 | 87832-5822 1 2 8 87832-1821 87832-1823 87832-5823 1 3 YES N.A YES YES YES 20.65 18.85 16.00 12.00 14.00 19.00 0.15 3.6020.20 87832-1870 | 87832-1872 | 87832-5872 1 4 87832-1812 87832-1816 | 87832-1814 3 2 YES NA YES YES NA 0.15 | 3.6020.20 87832-1813 87832-1817 87832-1815 3 3 YES NA YES YES NA 0.15 | 3.60+0.20 87832-2060 | 87832-2062 | 87832-5962 1 1 87832-2020 | 87832-2022 | 87832-5922 1 2 20 87832-2021 87832-2023 87832-5923 1 3 YES N.A YES YES YES 22.65 20.85 18.00 14.00 16.00 21.00 0.15 3.6020.20 | 87832-2070 | 87832-2072 | 87832-5972 1 4 87832-2012 | 87832-2016 | 87832-2014 1 2 YES NA YES YES NA 0.15 | 3.6020.20 87832-2260 | 87832-2262 | 87832-6062 1 1 87832-2220 | 87832-2222 | 87832-6022 1 2 22 \-3737-2221 | 87832-2203 | 87832_6023 j 5 YES NA YES YES YES 24.65 22.85 | 20.00 16.00 18.00 23.00 0.15 | 3.60#0.20 87832-2270 | 87832-2272 | 87832-6072 1 4 87832-2460 | 87832-2462 | 87832-6162 1 1 87832-2420 | 87832-2422 | 87832-6122 1 2 24 87832-2421 87832-2423 87832-6123 1 3 YES NA YES YES YES 26.65 24.85 22.00 18.00 20.00 25.00 0.15 3.6020.20 87832-2470 | 87832-2472 | 87832-6172 1 4 87832-2412 | 87832-2416 | 87832-2414 1 2 YES NA YES YES NA 0.15 | 3.6020.20 PLATING OPTIONS: S=87 Jquarty| GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 1 - 0.05-0.13um/2-5uin GOLD IN CONTACT AREA AND SSS) |sympoits| (UNLESS SPECIFIED) MM ONLY NTS METRIC Oc PROJECTION 1,88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER wos mm INCH __| ORAWN BY DATE THLE 1.27um/S0uin MIN. NICKEL OVERALL. 1 NS \W=0 4 PLACES|t--- [+--- MENARLY 2015/05/22 MILLIGRID 2 - 038um/15uin MIN, GOLD IN CONTACT AREA AND g a 3 PLACES|t--- _[+--- _|CHECKED BY DATE 2MM PITCH, SMT 4.88um/75uin MIN, MATTE TIN IN SOLDER TAIL AREA OVER ns 2 \/=0 2 PLACES 0.20 Con = 01 109/24 VERTICAL SHROUDED HEADER . wos = --- --- 1.27um/S0uin MIN. NICKEL OVERALL. =ja = = | OS GS) \/-0 [oPlace [e--= [== _KHLIN 2015/09/22 molex 3 - 0.76um/30uin MIN. GOLD IN CONTACT AREA AND t.5cs wo Sar ANGULAR +30 MATERIAL NO. DOCUMENT NO. SHEET NO. 1,88um/75uin MIN, MATTE TIN IN SOLDER TAIL AREA OVER 4Iz2or = SEE TABLE SD-87832-0001 1.27um/50uin MIN. NICKEL OVERALL Woe ro DRAFT WHERE APPLICABLE 2 OF 12 . oe : fei Ot =e MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 4 - 250um/100uin MIN. MATTE TIN OVER 1.25um/50uin MIN. NICKEL OVERALL. A a WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 140 9 8 7 | 6 | 5 | 4 3 2 Rev. G 2012/01/11 26 TO 38 CIRCUITS CKT | ASSY P/N ASSY P/N ASSY P/N | T&R PLATING | peretign Locks |DUAL | CENTER PEGS DIMENSION Fl size | without cap| wiTH CAP WITH CAP OPTIONS | OPTIONS SIDE | POLARIZATION A B c D E F G H IN TUBE IN TUBE IN T&R SEE DUAL |CENTER | SLOTS (COPLAN) SHEET 12) 87832-2660 | 87832-2662 | 87832-6262 1 1 87632-2620 | 87832-2622 | 87832-6222 71 2 | 26 | 87832-2621 87832-2623 | 87832-6223 1 3 YES NA YES YES YES 28.65 26.85 24.00 20.00 22.00 27.00 0.15 3.6020.20 87632-2670 | 87832-2672 | 87632-6272 1 Z 87832-2612 | 87832-2616 NA NA 2 YES NA YES YES NA 0.15 | 3.6020.20 87832-2860 | 87832-2862 | 87832-6362 1 1 E| 3 | 87832-2620 | 87832-2622 | 87832-6322 1 2 YES 30.65 | 28.85 26,00 22,00 24.00 29.00 0.15 | 3.6020.20 87832-2821 | 87832-2823 | 87832-6323 1 3 YES NA YES YES 6020. 87832-2870 | 87832-2872 | 87832-6372 1 4 87832-3060 | 87832-3062 | 87832-6462 1 1 87832-3020 | 87832-3022 | 87832-6422 1 2 30 87832-3071 87832-3023 87832-6423 1 3 YES NA YES YES YES 32.65 30.85 28,00 24.00 26.00 31.00 0.15 3.60+0.20 87832-3070 | 87832-3072 | 87832-6472 1 4 87832-3012 | 87832-3016 | 87832-3014 3 2 YES NA YES YES NA 0.15 | 3.60+0.20 87832-3260 | 87832-3262 | 87832-6562 1 1 D 87832-3220 | 87832-3222 | 87832-6522 1 2 . . , 30.00 ; ; 32 g559 5001 1 87837-3909 | BERD 0S 7 5 YES NA YES YES YES | 34.65 32.85 26.00 28.00 33.00 0.15 | 3.6020.20 87832-3270 | 87832-3272 | 87832-6572 1 4 87832-3460 | 87832-3462 | 87832-6662 1 1 87832-3420 | 87832-3422 | 87832-6622 1 2 | 34 [8783923401 18783223403 | 8783206675 1 5 YES NA YES YES YES | 36.65 34.85 32.00 28.00 | 30.00 35.00 0.15 | 3.6020.20 87832-3470 | 87832-3472 | 87832-6672 1 4 87832-3412 | 87832-3416 | 87832-3414 3 2 YES NA YES YES NA 0.15 | 3.6020.20 87832-3660 | 87832-3662 NA NA 1 C| 5, [87632-3620 | 87832-3622 NA NA 2 37850-3601 | 87832-3673 NA NA 5 YES NA YES YES YES | 38.65 36.85 34,00 30.00 32.00 37.00 0.15 | 3.6020.20 87832-3670 | 87832-3672 NA NA Z 87832-3860 | 87832-3862 NA NA 1 __| 87832-3620 | 87832-3822 NA NA 2 |__ 38 37830-3801 1 87837-3825 NA NA ; YES NA YES YES YES | 40.65 38.85 36.00 | 32.00 34.00 39.00 0.15 | 3.6020.20 87832-3870 | 87832-3872 NA NA Z B PLATING OPTIONS: eae Aa aS GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE 1 - 0.05-0.13um/2-5uin GOLD IN CONTACT AREA AND ass oweoLs (UNLESS SPECIFIED) MM ONLY NTS METRIC Oc PROJECTION _ 4.88um/75uin MIN, MATTE TIN IN SOLDER TAIL AREA OVER eos mm INCH | ORAWN BY DATE |TTLE 1.27um/SOuin MIN, NICKEL OVERALL. in SSB \(/=0 [ZC PLACESIE---__[#--= MENARLY 2045/05/22 MILLIGRID 2 - 038um/15uin MIN. GOLD IN CONTACT AREA AND o Bla>_, [BPLACES|#- [+-- [CHECKED BY DATE 2MM PITCH, SMT 4.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER ows &I\G/=0 [2 PLACES|+0.20 [+--- (CGOH 2013/09/24) VERTICAL SHROUDED HEADER 4.27um/50uin MIN, NICKEL OVERALL Wo = =I TPLACE [E--- [=~ [APPROVED BY DATE A ; AABS=! \\/0 [oO PLAce f---_|t-- _KHLIM 2015/09/22 3 - 0.76um/30uin MIN. GOLD IN CONTACT AREA AND C7 SES = = SaTERAL NO | Wo ZAG ANGULAR +30 . . SHEET NO. 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER d= 220 DRAFT WHERE APPLICABLE SEE TABLE SD-87832-0001 10 OF 12 . Ureroa 127um/S0uin MIN. NICKEL OVERALL, . wn SO = MUST REMAIN SZE| THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 4 - 250um/100uin MIN. MATTE TIN OVER 1.25um/S0uin MIN. NICKEL OVERALL. A a WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | 6 | 5 | 4 | 3 | 2 | 140 9 8 7 | 6 | 5 | 4 3 2 4 40 TO 50 CIRCUITS e | KT |ASSY P/N ASSY P/N | ASSY P/N Tar PLATING FRICTION Locks |DUAL | CENTER _ DIMENSION SIZE | WITHOUT CAP WITH CAP WITH CAP SIDE POLARIZATION A B c D E F G H IN TUBE IN TUBE IN T&R SEE DUAL |CENTER | SLOTS (COPLAN) SHEET 12) 87832-4060 | 87832-4062 | 87832-6962 1 i 87832-4020 | 87832-4022 | 87832-6922 1 2 40 [87832-4021 | 67632-4023 | 87832-6923 | 1 3 YES ) NA | YES YES YES | 4265 | 4085 | 38.00 | 3400 | 3600 | 4100 0.15 | 3.60:0.20 87832-4070 | 87832-4072 | 87832-6972 1 z 87832-4012 | 87832-4016 NA NA 2 YES | NA |_YES YES NA 0.15 | 3.6020.20 87832-4260 | 87832-4262 NA NA 1 E 87832-4220 | 87832-4222 NA NA 2 42 -grpgpcaoo1 1 BTBSL3S 7 nS : YES | NA | YES YES ves | 4465 | 4285 | 40.00 | 3600 | 3800 | 43.00 0.15 | 3.6020.20 87832-4270 | 87832-4272 NA NA 4 87832-4460 | 87832-4462 | 87832-7162 1 1 87832-4420 | 87832-4422 | 87832-7122 1 2 | 44 87832-4421 87832-4423 87832-7123 1 3 YES NA YES YES YES 46.65 44.85 42.00 38.00 40.00 45.00 0.15 3.6020.20 87832-4470 | 87832-4472 | 87832-7172 1 4 87832-4413 | 87832-4417 | 87832-4415 3 3 YES | NA | YES YES NA 0.15 | 3.6020.20 87832-4660 | 87832-4662 | 87832-7262 1 1 D| ,, [87832-4620 | 67832-4622 | 87832-7222 1 2 37830-4601 1 87832-4603 A NA 5 YES | NA | YES YES ves | 4865 | 4685 | 4400 | 40.00 | 4200 | 47.00 0.15 | 3.60#0.20 87832-4670 | 67832-4672 | 87832-7272 1 4 87832-4860 | 87832-4862 NA NA 1 87832-4820 | 87832-4822 NA NA 2 48 Sess ae) B7BITLEBDS x x ; YES | NA | YES YES ves | 5065 | 4885 | 4600 | 4200 | 44.00 | 49.00 0.15 | 3.6020.20 87832-4870 | 87832-4872 NA NA 4 87832-5060 | 87832-5062 | 87832-7462 1 1 87832-5020 | 87832-5022 | 87832-7422 1 2 c| so beze3a-S001 1 87832-5005 1 87632-7403 7 5 YES | NA | YES YES ves | 5265 | 5085 | 48.00 | 4400 | 4600 | 5100 0.15 | 3.6020.20 87832-5070 | 87832-5072 | 87832-7472 1 4 87832-5012_| 87832-5016 NA NA 2 YES | NA | YES YES NA 0.15 _[3.6020.20 B PLATING OPTIONS: SSS EATING OF TONS: SS] [auality] GENERAL TOLERANCES DIMENSION STYLE SRE] PESGNNTS 7 7 THIRD. ANGLE 1- 0.05-0.13um/2-5uin GOLD IN CONTACT AREA AND SSS) |sympoits| (UNLESS SPECIFIED) MM ONLY NTS METRIC PROJECTION 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER Bes mm] INCH | ORAWN BY DATE [Tile 1.27um/50uin MIN. NICKEL OVERALL. 1 NS \W=0 4 PLACES|t--- [+--- MENARLY 2015/05/22 MILLIGRID 2 - 0,38um/15uin MIN. GOLD IN CONTACT AREA AND g a 3 PLACES|t--- _[+--- _|CHECKED BY DATE 2MM PITCH, SMT 4.88um/75uin MIN, MATTE TIN IN SOLDER TAIL AREA OVER nis 2 /=0 2 PLACES|+0.20 [+--- |CGOH 2015/09/21 VERTICAL SHROUDED HEADER 1.27um/SQuin MIN, NICKEL OVERALL. Hx es |" W-0 1 PLACE eM 0887/09/22 m 1 xX A 3 - 0.76um/30uin MIN. GOLD IN CONTACT AREA AND tESz Q PLACE | SEL mormex 1.88um/75uin MIN. MATTE TIN IN SOLDER TAIL AREA OVER JiZsge BART NER ADEL CABLE SEE TABLE SD-87832-0001 4 OF 12 . U&era 127um/0uin MIN. NICKEL OVERALL. MOU <t MUST. REMAIN SZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX 4 250um/100uin MIN. MATTE TIN OVER 1.25um/S0uin MIN. NICKEL OVERALL. A a WITHIN DIMENSIONS [A SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 8 7 | Rev. G 2012/01/11 6 | 3 | 4 | 3 | 2 | '40 | 9 | 8 7 6 5 4 3 2 4 PACKAGING OPTIONS OPTION 1 OPTION 2 OPTION 3 OFF OSes | WPF OFFF OFFA f i i ( ! ( ' \ | 1 al i } | i Sy pe CUSTOMER CUSTOMER PULL OUT DIRECTION PULL OUT DIRECTION EMBOSSED TAPE & REEL POCKET DESCRIPTIONS CENTER POLARIZATION OPTIONS PEG OPTIONS PILOT HOLE OPTIONS OPTIONS ON THE LEFT | ON THE RIGTH | WITH PEG | WITHOUT PEG| 2 SIDES 1 SIDE 1 YES NA YES NA YES NA 2 NA YES YES NA YES NA 3 YES NA NA YES YES NA 4 YES NA YES NA NA YES = a a QUALITY GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE SSS) |symaois| (UNLESS SPECIFIED) MM ONLY NTS METRIC Od PROJECTION CUSTOMER 22s mm INCH __ | DRAWN BY DATE TITLE PULL OUT DIRECTION in SS S)Z1G/-0 [2 PLACES | --- __[4--- MENARLY 2015/05/22 MILLIGRID g 3 PLACES|+--- |+--- CHECKED BY DATE 2MM PITCH, SMT abs |S|G/-0 [2 PLacesit0.20 [4--- |CGOH 2015/09/21] VERTICAL SHROUDED HEADER WS = =H 1 PLACE [E--- [#--- APPROVED BY DATE QB SSz) \G/-0 [orcace E _[e- _KHLIM 2015/09/22 molex Ww Sg = a = ANGULAR +30 MATERIAL NO. DOCUMENT NO. SHEET NO. Moe ss DRAFT WHERE APPLICABLEL_oEE TABLE SD-87832-0001 12 OF 12 fei Ot =e MUST REMAIN SIZE! THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A w WITHIN DIMENSIONS A INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION b_frame_A3_P_AM_T 9 | B | 7 Rev. G 2012/01/11 6 | 3 | 4 | 3 | 2 | '