AC axial compact fan W2S130-AA25-72 sickled blades (S series), single inlet ebm-papst Mulfingen GmbH & Co. KG Bachmuhle 2 * D-74673 Mulfingen Phone +49 7938 81-0 Fax +49 7938 81-110 info1@de.ebmpapst.com www.ebmpapst.com Limited partnership * Headquarters Mulfingen County court Stuttgart * HRA 590344 General partner Elektrobau Mulfingen GmbH * Headquarters Mulfingen County court Stuttgart * HRB 590142 Nominal data Type W2S130-AA25-72 Motor M2S052-CA Phase 1~ 1~ 1~ Nominal voltage VAC 115 115 115 Frequency Hz 50 60 60 Type of data definition fa fa fa Valid for approval / standard CE CE UL Speed min-1 2800 3250 3250 Power input W 41 38 40 Current draw A 0.56 0.47 Max. back pressure Pa 80 120 120 Min. ambient temperature C -25 -25 -25 Max. ambient temperature C 50 70 70 ml = Max. load * me = Max. efficiency * fa = Running at free air * cs = Customer specs * cu = Customer unit Subject to alterations Item no. 14915-5-9980 * ENG * Revision 83810 * Release 2015-02-02 * Page 1 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial compact fan W2S130-AA25-72 sickled blades (S series), single inlet Technical features Mass 1.1 kg Size 130 mm Surface of rotor Coated in black Material of blades Sheet steel, coated in black Material of wall ring Die-cast aluminium, coated in black Number of blades 7 Direction of air flow "V" Direction of rotation Counter-clockwise, seen on rotor Type of protection IP 20 Insulation class "B" Max. permissible ambient motor temp. (transp./ storage) + 80 C Min. permissible ambient motor temp. (transp./storage) - 40 C Mounting position Any Condensate discharge holes None, open rotor Operation mode S1 Motor bearing Ball bearing Touch current acc. IEC 60990 (measuring network Fig. 4, TN system) < 0.75 mA Motor protection Thermal overload protector (TOP) wired internally Protection class I (if protective earth is connected by customer at the connection point of the housing) Product conforming to standard EN 60335-1; CE Approval UL 507; VDE; CSA C22.2 Nr.113 Item no. 14915-5-9980 * ENG * Revision 83810 * Release 2015-02-02 * Page 2 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com W2S130-AA25-72 AC axial compact fan sickled blades (S series), single inlet Product drawing 1 Direction of air flow "V" 2 Connection line AWG20, 2x lead tips crimped 3 M4 screw for fastening earth conductor Connection screen L = black N = black TOP = Thermal overload protector Item no. 14915-5-9980 * ENG * Revision 83810 * Release 2015-02-02 * Page 3 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial compact fan W2S130-AA25-72 sickled blades (S series), single inlet Charts: Air flow 50 Hz Druck p f s[Pa]fur Rho=1,2kg/m^3 20 40 60 qv[cfm] 100 80 120 140 160 180 200 0,68 165 0,66 160 0,64 155 0,62 150 0,6 145 0,58 140 0,56 135 0,54 130 0,52 125 0,5 120 0,48 115 0,46 110 0,44 105 0,42 100 0,4 95 0,38 90 0,36 85 0,34 80 0,32 75 0,3 70 0,28 65 0,26 60 Air performance measured as per ISO 5801 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. 0,24 55 0,22 4 50 0,2 45 0,18 40 0,16 35 0,14 3 30 0,12 25 0,1 20 0,08 2 15 0,06 10 0,04 ] [Pa pf s 5 0 Measurement: LU-58320 p fs_E[IN H2O] pf s[Pa] 170 0 0,02 1 0 20 40 60 80 100 120 140 160 180 200 qv[m^3/h] 220 240 260 280 300 320 340 0 360 Measured values U f n Pe I qv pfs V Hz min-1 W A m3/h Pa 1 115 50 2800 41 0.56 325 0 2 115 50 2800 42 0.56 300 15 3 115 50 2795 42 0.57 275 30 4 115 50 2790 43 0.57 210 50 U = Supply voltage * f = Frequency * n = Speed * Pe = Power input * I = Current draw * qv = Air flow * pfs = Pressure increase Item no. 14915-5-9980 * ENG * Revision 83810 * Release 2015-02-02 * Page 4 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com AC axial compact fan W2S130-AA25-72 sickled blades (S series), single inlet Charts: Air flow 60 Hz 40 60 80 100 qv[cfm] 120 140 160 180 200 220 240 0,76 0,74 0,72 0,7 0,68 0,66 0,64 0,62 0,6 0,58 0,56 0,54 0,52 0,5 0,48 0,46 0,44 0,42 0,4 0,38 0,36 0,34 0,32 0,3 4 0,28 0,26 0,24 0,22 3 0,2 0,18 0,16 0,14 0,12 2 0,1 0,08 0,06 0,04 0,02 1 0 100 120 140 160 180 200 220 240 260 280 300 320 340 360 380 400 420 qv[m^3/h] Measurement: LU-58323 Air performance measured as per ISO 5801 Installation category A. For detailed information on the measuring set-up, please contact ebm-papst. Suction-side noise levels: LwA measured as per ISO 13347 / LpA measured with 1m distance to fan axis. The values given are valid under the measuring conditions mentioned above and may vary according to the actual installation situation. With any deviation from the standard set-up, the specific values have to be checked and reviewed with the unit installed. ] [Pa pf s 190 185 180 175 170 165 160 155 150 145 140 135 130 125 120 115 110 105 100 95 90 85 80 75 70 65 60 55 50 45 40 35 30 25 20 15 10 5 0 20 p fs_E[IN H2O] pf s[Pa] Druck p f s[Pa]fur Rho=1,2kg/m^3 0 0 20 40 60 80 Measured values U f n Pe I qv pfs V Hz min-1 W A m3/h Pa 1 115 60 3250 38 0.47 380 0 2 115 60 3210 40 0.48 340 25 3 115 60 3180 41 0.48 290 50 4 115 60 3180 41 0.48 215 70 U = Supply voltage * f = Frequency * n = Speed * Pe = Power input * I = Current draw * qv = Air flow * pfs = Pressure increase Item no. 14915-5-9980 * ENG * Revision 83810 * Release 2015-02-02 * Page 5 / 5 ebm-papst Mulfingen GmbH & Co. KG * Bachmuhle 2 * D-74673 Mulfingen * Phone +49 (0) 7938 81-0 * Fax +49 (0) 7938 81-110 * info1@de.ebmpapst.com * www.ebmpapst.com