COMMUNICATIONS COMPONENTS
Key Features • Thin film filter based
• Wide bandwidth
• Low insertion loss
• High isolation
• Low temperature dependent loss
• Epoxy-free optical path
JDSU 1510/1550 and 1550/1625 filter wavelength division multiplexers use
interference filters to add a supervisory channel for active fiber monitoring.
Stable and reliable, filter WDMs have wide bandwidth, low insertion loss, high
isolation, and low temperature dependent loss.
Applications
• Network control applications
• Amplifier chain control
• Network protocol information
Compliance
• Telcodia GR-1221
1510/1550 and 1550/1625 nm Filter Wavelength Division
Multiplexers
NORTH AMERICA:800 498-JDSU (5378) WEBSITE:www.jdsu.comWORLDWIDE:+800 5378-JDSU
Performance for 1510/1550 nm (Model D1)
2
1510/1550 AND 1550/1625 NM
FILTER WAVELENGTH DIVISION MULTIPLEXERS
Specifications
Parameter Pass 1510 / Pass 1550 / Pass 1625 / Pass 1550 /
Reflect 1550 Reflect 1510 Reflect 1550 Reflect 1625
Pass port (C↔P) wavelength range λP1500 to 1520 nm 1529 to 1565 nm 1600 to 1650 nm 1529 to 1565 nm
Pass port (C↔P) insertion loss Maximum 0.6 dB
Pass port (C↔P) flatness Maximum 0.3 dB
Pass port (C↔P) isolation at λRMinimum 30 dB
Reflect port (C↔R) wavelength range λR1529 to 1565 nm 1500 to 1520 nm 1529 to 1565 nm 1600 to 1650 nm
Reflect port (C↔R) insertion loss Maximum 0.4 dB
Reflect port (C↔R) flatness Maximum 0.15 dB
Reflect port (C↔R) isolation at λPMinimum 12 dB
Directivity Minimum 55 dB
Optical return loss Minimum 50 dB
Polarization dependent loss Maximum 0.05 dB
Polarization mode dispersion Maximum 0.1 ps
Temperature dependent loss Maximum 0.1 dB
Optical power Maximum 500 mW
Tensile load Maximum 5 N
Operating temperature -5 to 75°C
Storage temperature -40 to 85°C
Package dimensions (D x L)
250 µm 5.5 x 35.4 mm
900 µm 5.5 x 42.9 mm
Fiber length >1.0 m
Performance for 1550/1625 nm (Model E1)
0
5
10
0
1
5
20
0
2
5
30
0
35
1
5
1
0
1
5
4
0
1
5
7
0
1
600
1
630
1
660
WAVELENGTH
(
nm
)
A
TTENUATION
(
dB
)
REFLE
C
T
C
HANNE
L
PA
SS
C
HANNE
L
NORTH AMERICA:800 498-JDSU (5378) WEBSITE:www.jdsu.comWORLDWIDE:+800 5378-JDSU
SMF-28 is a registered trademark of Corning Incorporated.
Telcordia is a registered trademark of Telcordia Technologies Incorporated.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2007 JDS Uniphase
Corporation. All rights reserved. 21021906 Rev. 002 09/05 WDMFILTER15101625.DS.CC.AE
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: FWS-D10010000
Code Fiber Type
1 250 µm fiber
2 900 µm fiber
Code Wavelength
D1 Pass 1510/Reflect 1550 (for 1510/1550nm)
D2 Pass 1550/Reflect 1510 (for 1510/1550nm)
E1 Pass 1625/Reflect 1550 (for 1550/1625nm)
E2 Pass 1550/Reflect 1625 (for 1550/1625nm)
FWS-
1510/1550 AND 1550/1625 NM
FILTER WAVELENGTH DIVISION MULTIPLEXERS
Code Connector1, 2
0 No connector
1FC/SPC
2 FC/APC
3 SC/SPC
4 SC/APC
5ST
6 LC/SPC
00 000
1. Connectors available only with 900 µm fiber option.
2. Other connectors available upon request.
February 2007
