X-NUCLEO-STMODA1 - STMICROELECTRONICS

Features

• STMod+ connector compatible with STM32 Nucleo boards

• Full STMod+ support for a range of interfaces: SPI, UART, I²C, RESET,

INTERRUPT, ADC, PWM and general purpose I/Os

• STM32 Nucleo support through Arduino UNO V3 connector

• Set of 15 Jumpers to allow multiple configurations and expand the range of

possible use cases

• RoHS compliant

Description

The X-NUCLEO-STMODA1 provides an easy way to expand your STM32 Nucleo

board with the STMod+ connector, which allows interaction with the new set of

STM32 Nucleo development boards using this connector. It provides an easy way to

evaluate the STMod+ board solution together with other STM32 Nucleo boards.

The STMod+ is a 2x10-pin connector providing a set of interfaces such as SPI,

UART, I²C and other functions such as RESET, INTERRUPT, ADC, PWM and

general purpose I/Os. The X-NUCLEO-STMODA1 has a female STMod+ connector

with 2 mm pitch.

The X-NUCLEO-STMODA1 expansion board is equipped with a set of jumpers for

the added flexibility of allowing you to also use the board with the STM32 B-L475E-

IOT01A discovery kit node board.

Product summary

STMod+ connector

expansion board for

STM32 Nucleo

X-NUCLEO-

MODA1

STM32L4

Discovery kit IoT

node, low-power

wireless, BLE, NFC,

SubGHz, Wi-Fi

B-L475E-IOT01A

LTE Cellular to

Cloud Pack with

STM32L496AG

MCU

P-L496G-CELL02

System Workbench

for STM32: free IDE

on Windows, Linux

and OS X

SW4STM32

STMod+ connector expansion board for STM32 Nucleo

X-NUCLEO-STMODA1

Data brief

DB3589 - Rev 1 - April 2018

For further information contact your local STMicroelectronics sales office.

www.st.com

1Schematic diagrams

Figure 2. X-NUCLEO-MODA1 circuit schematics

A0

A1

A2

A3

A4

A5

D0

D1

D2

D3

D4

D5

D6

D7

D8

D9

D10

D11

D12

D13

D14

D15

STmod+

Arduino Connector

CN6

1

2

3

4

5

6

7

8

CN8

1

2

3

4

5

6

CN9

1

2

3

4

5

6

7

8

CN5

1

2

3

4

5

6

7

8

9

10

JP1

1

2

3

JP2

1

2

3

JP3

1

2

3

JP4

1

2

3

JP5

1

2

3

JP6

1

2

JP7

1

2

JP8

1

2

JP9

1

2

JP10

1

2

JP11

1

2

JP12

1

2

JP13

1

2

JP14

1

2

JP15

1

2

UART_RTS

USART2_RX

USART2_TX

USART1_TX

USART1_RX

SPI1_MOSI

SPI1_MISO

SPI1_SCK

USART_TX

USART_RX

SPIX_NSS/UARTY_CTS

SPIX_MOSIP/UARTY_TX

SPIX_MISOP/UARTY_RX

SPIX_SCK/UARTY_RTS

GND

+5V

I2CZ_SCL

I2CZ_SDA

SPIX_MISOS

SPIX_MOSIS

INT

RESET

ADC

PWM

GPIO4

GPIO3

GPIO2

GPIO1

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

X-NUCLEO-STMODA1

Schematic diagram

DB3589 - Rev 1 page 2/4

Revision history

Table 1. Document revision history

Date Version Changes

10-Apr-2018 1 Initial release.

X-NUCLEO-STMODA1

DB3589 - Rev 1 page 3/4

IMPORTANT NOTICE – PLEASE READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST

products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST

products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.

Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of

Purchasers’ products.

No license, express or implied, to any intellectual property right is granted by ST herein.

Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.

ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.

Information in this document supersedes and replaces information previously supplied in any prior versions of this document.

X-NUCLEO-STMODA1

DB3589 - Rev 1 page 4/4