1.5 KE 6.8 ... 1.5 KE 440CA Unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden Peak pulse power dissipation Impuls-Verlustleistung 1500 W Nominal breakdown voltage Nominale Abbruch-Spannung 6.8...440 V Plastic case - Kunststoffgehause O 5.4 x 7.5 [mm] Weight approx. - Gewicht ca. 1.1 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Dimensions / Mae in mm Standard packaging taped in ammo pack Standard Lieferform gegurtet in Ammo-Pack see page 16 siehe Seite 16 For bidirectional types (suffix "C" or "CA"), electrical characteristics apply in both directions. Fur bidirektionale Dioden (Suffix "C" oder "CA") gelten die el. Werte in beiden Richtungen. Maximum ratings and Characteristics Kenn- und Grenzwerte Peak pulse power dissipation (10/1000 :s waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 :s) TA = 25/C PPPM Steady state power dissipation Verlustleistung im Dauerbetrieb TA = 25/C PM(AV) 6.5 W 2) Peak forward surge current, 60 Hz half sine-wave Stostrom fur eine 60 Hz Sinus-Halbwelle TA = 25/C IFSM 200 A 3) Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Max. instantaneous forward voltage Augenblickswert der Durchlaspannung IF = 100 A VBR # 200 V VBR > 200 V 1500 W 1) Tj TS - 50...+175/C - 50...+175/C VF VF < 3.5 V 3) < 5.0 V 3) Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 23 K/W 2) Thermal resistance junction to lead Warmewiderstand Sperrschicht - Anschludraht RthL < 8 K/W 1 ) Non-repetitive current pulse see curve IPPM = f (tr) Hochstzulassiger Spitzenwert eines einmaligen Strom-Impulses, siehe Kurve IPPM = f (tr) 2 ) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gultig, wenn die Anschludrahte in 10 mm Abstand von Gehause auf Umgebungstemperatur gehalten werden 3 ) Unidirectional diodes only - nur fur unidirektionale Dioden 25.03.2003 1 1.5 KE 6.8 ... 1.5 KE 440CA Maximum ratings Type Typ 1.5 KE6.8 1.5 KE6.8A 1.5 KE7.5 1.5 KE7.5A 1.5 KE8.2 1.5 KE8.2A 1.5 KE9.1 1.5 KE9.1A 1.5 KE10 1.5 KE10A 1.5 KE11 1.5 KE11A 1.5 KE12 1.5 KE12A 1.5 KE13 1.5 KE13A 1.5 KE15 1.5 KE15A 1.5 KE16 1.5 KE16A 1.5 KE18 1.5 KE18A 1.5 KE20 1.5 KE20A 1.5 KE22 1.5 KE22A 1.5 KE24 1.5 KE24A 1.5 KE27 1.5 KE27A 1.5 KE30 1.5 KE30A 1.5 KE33 1.5 KE33A 1.5 KE36 1.5 KE36A 1.5 KE39 1.5 KE39A 1.5 KE43 1.5 KE43A 1.5 KE47 1.5 KE47A 1.5 KE51 2 Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spanng. bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspg. Max. rev. current Max. Sperrstrom at / bei VWM VBR [V] VWM [V] ID [:A] VC [V] IPPM [A] 5.5 5.8 6.0 6.4 6.6 7.0 7.3 7.7 8.1 8.5 8.9 9.4 9.7 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 1000 1000 500 500 200 200 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.5 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 145 150 134 139 126 130 114 117 105 108 97 100 91 94 82 86 71 74 67 70 59 60 54 56 49 51 45 47 40 42 36 38 33 34 30 31 27 29 25 26 23 24 21 6.8 10% 6.8 5% 7.5 10% 7.5 5% 8.2 10% 8.2 5% 9.1 10% 9.1 5% 10 10% 10 5% 11 10% 11 5% 12 10% 12 5% 13 10% 13 5% 15 10% 15 5% 16 10% 16 5% 18 10% 18 5% 20 10% 20 5% 22 10% 22 5% 24 10% 24 5% 27 10% 27 5% 30 10% 30 5% 33 10% 33 5% 36 10% 36 5% 39 10% 39 5% 43 10% 43 5% 47 10% 47 5% 51 10% 6.12...7.48 *) 6.45...7.14 *) 6.75...8.25 *) 7.13...7.88 *) 7.38...9.02 *) 7.79...8.61 *) 8.19...10.0 8.65...9.55 9.0...11.0 9.5...10.5 9.9...12.1 10.5...11.6 10.8...13.2 11.4...12.6 11.7...14.3 12.4...13.7 13.5...16.5 14.3...15.8 14.4...17.6 15.2...16.8 16.2...19.8 17.1...18.9 18.0...22.0 19.0...21.0 19.8...24.2 20.9...23.1 21.6...26.4 22.8...25.2 24.3...29.7 25.7...28.4 27.0...33.0 28.5...31.5 29.7...36.3 31.4...34.7 32.4...39.6 34.2...37.8 35.1...42.9 37.1...41.0 38.7...47.3 40.9...45.2 42.3...51.7 44.7...49.4 45.9...56.1 Max. clamping voltage Max. Begrenzerspanng. at / bei IPPM (10/1000:s) F:\Data\WP\DatBlatt\Einzelblatter\1.5ke6.8.wpd 1.5 KE 6.8 ... 1.5 KE 440CA Maximum ratings Type Typ 1.5 KE51A 1.5 KE56 1.5 KE56A 1.5 KE62 1.5 KE62A 1.5 KE68 1.5 KE68A 1.5 KE75 1.5 KE75A 1.5 KE82 1.5 KE82A 1.5 KE91 1.5 KE91A 1.5 KE100 1.5 KE100A 1.5 KE110 1.5 KE110A 1.5 KE120 1.5 KE120A 1.5 KE130 1.5 KE130A 1.5 KE150 1.5 KE150A 1.5 KE160 1.5 KE160A 1.5 KE170 1.5 KE170A 1.5 KE180 1.5 KE180A 1.5 KE200 1.5 KE200A 1.5 KE220 1.5 KE220A 1.5 KE250 1.5 KE250A 1.5 KE300 1.5 KE300A 1.5 KE350 1.5 KE350A 1.5 KE400 1.5 KE400A 1.5 KE440 1.5 KE440A 25.03.2003 Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spanng. bei IT = 1 mA *) at / bei IT = 10 mA Stand-off voltage Sperrspg. Max. rev. current Max. Sperrstrom at / bei VWM VBR [V] VWM [V] ID [:A] VC [V] IPPM [A] 43.6 45.4 47.8 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 70.1 80.5 77.0 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 22 19 20 17 18 16.0 17.0 14.0 15.0 13.0 13.9 12.0 12.6 10.9 11.4 9.9 10.3 9.1 9.5 8.4 8.7 7.3 7.6 6.8 7.1 6.4 6.7 6.1 6.4 5.4 5.7 4.5 4.8 4.3 4.5 3.6 3.8 3.1 3.2 2.7 2.8 2.4 2.6 51 5% 56 10% 56 5% 62 10% 62 5% 68 10% 68 5% 75 10% 75 5% 82 10% 82 5% 91 10% 91 5% 100 10% 100 5% 110 10% 110 5% 120 10% 120 5% 130 10% 130 5% 150 10% 150 5% 160 10% 160 5% 170 10% 170 5% 180 10% 180 5% 200 10% 200 5% 220 10% 220 5% 250 10% 250 5% 300 10% 300 5% 350 10% 350 5% 400 10% 400 5% 440 10% 440 5% 48.5...53.6 50.4...61.6 53.2...58.8 55.8...68.8 58.9...65.1 61.2...74.8 64.6...71.4 67.5...82.5 71.3...78.8 73.8...90.2 77.9...86.1 81.9...100 86.5...95.5 90.0...110 95.0...105 99.0...121 105...116 108...132 114...126 117...143 124...137 135...165 143...158 144...176 152...168 153...187 162...179 162...198 171...189 180...220 190...210 198...242 209...231 225...275 237...263 270...330 285...315 315...385 332...368 360...440 380...420 396...484 418...462 Max. clamping voltage Max. Begrenzerspanng. at / bei IPPM (10/1000:s) 3 1.5 KE 6.8 ... 1.5 KE 440CA 1 The order of type numbers is graded to the international E 24 standard. The standard tolerance of the breakdown voltage for each type is 10%. Suffix "A" denotes a tolerance of 5%. e.g.: 1.5KE160CA = bidirectional diode, VBR = 160 V ( 5%), VWM $ 136 V at ID = 5 :A 1.5KE7.5A = unidirectional diode, VBR = 7.5 V ( 5%), VWM $ 6.4 V at ID = 500 :A Die Abstufung der Typen innerhalb der Reihe entspricht dem internationalen E 24-Standard. Die Toleranz der Arbeitsspannung jedes einzelnen Typs betragt in der Standardausfuhrung 10%. Suffix "A" kennzeichnet eine Toleranz 5%. z.B.: 1.5KE160CA = bidirectionale Diode, VBR = 160 V ( 5%), VWM $ 136 V at ID = 5 :A 1.5KE7.5A = unidirectionale Diode, VBR = 7.5 V ( 5%), VWM $ 6.4 V at ID = 500 :A 1 ) Valid, if leads are kept at ambient temperature at a distance of 10 mm from case Gultig, wenn die Anschludrahte in 10 mm Abstand von Gehause auf Umgebungstemperatur gehalten werden 4 F:\Data\WP\DatBlatt\Einzelblatter\1.5ke6.8.wpd