1-Watt SMD Blue LED Lamp (7 mm) OVSPBCCR8 x x x x High luminous flux output for illumination Exposed pad design for excellent heat transfer Designed for high current operation Reflow soldering applicable Product Photo Here The OVSPBCCR8 is designed to handle high current and heat and emits sufficient light for a variety of lighting and illumination applications. Small size and high power allow for compact and cost-effective lighting solutions. Applications x Automotive (exterior and interior lighting) x Backlighting LCD displays (televisions and computer monitors) x Entertainment (studios, theaters, nightclubs, restaurants) x Accent lighting (wall wash, landscape, spotlight) x Bicycle and pedestrian safety lights RoHS Part Number Material Emitted Color Flux Typ. lm Lens Color OVSPBCCR8 InGaN Blue 11 Water Clear Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.2 01/06 Page 1 of 4 1-Watt SMD Blue LED Lamp (7 mm) OVSPBCCR8 Absolute Maximum Ratings TA = 25o C (on metal core PCB1) unless otherwise noted Storage Temperature Range -40 ~ +85 C Operating Temperature Range -40 ~ +85 C Reverse Voltage 5V Continuous Forward Current 300 mA Peak Forward Current (10% Duty Cycle, 1KHz) 500 mA Power Dissipation 1.3 W Junction Temperature +125 C Junction-to-Ambient Junction-to-case +45 C/W 2 15 C/W Notes: 1. Metal core PCB defined as good heat transmission substrate (thickness of 2.0mm Al-based PCB 20x20mm, 2. Rth test condition: mounted on 2.0mm Al-based PCB 20x20mm. 3. Rth test condition: mounted on 2.0 mm Al-based PCB in size of 20 x 20 mm. JC <15C/W could do) Electrical Characteristics TA = 25o C (on metal core PCB1) unless otherwise noted PARAMETER SYMBOL MIN TYP MAX UNITS CONDITIONS lm IF = 300 mA lumen Luminous Flux 5 11 ---- VF Forward Voltage ---- 3.6 4.4 V IF = 300 mA IR Reverse Current ---- ---- 10 A VR = 5 V Dominant Wavelength 464 470 476 nm IF = 300 mA 50% Power Angle ---- 140 ---- deg IF = 300 mA D 2 1/2 Standard Bins (IF = 300 mA) Lamps are sorted to luminous flux ( V) and dominant wavelength ( D) and ranked as shown. Orders for OVSPBCCR8 may be filled with any or all bins contained as below. Luminous Flux (lm) Forward Voltage (VF) Rank V5 V6 V7 Voltage (V) 3.2 ~ 3.6 V 3.6 ~ 4.0 V 4.0 ~ 4.4 V 11 9 E 7 D 5 C 464 468 472 476 Dominant Wavelength (nm) Luminous Flux is at C bin or above. Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .2 01/06 Page 2 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com 1-Watt SMD Blue LED Lamp (7 mm) OVSPBCCR8 Typical Electro-Optical Characteristics Curves 500 160 400 mA 120 300 % 80 200 40 100 0 3.0 3.4 3.6 0 4.2 4.6 0 100 200 300 400 500 V mA Forward Current vs Forward Voltage Relative Luminous Flux vs Forward Current Half Power WL = 470nm 100 500 75 400 % 50 mA 300 25 0 j-c 15C/ 200 c-a 45C/ 100 0 300 400 500 600 0 20 40 60 80 100 110 nm C Maximum Forward DC Current vs Ambient Temperature Relative Luminous Intensity vs Wavelength 50% Power Angle: 140 100 80 60 % 40 20 -90 -60 -30 0 30 60 90 0 C Far Field Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A.2 01/06 Page 3 of 4 1-Watt SMD Blue LED Lamp (7 mm) OVSPBCCR8 Reel Dimensions: 13-inch reel Carrier Tape Dimensions: Loaded quantity 1400 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .2 01/06 Page 4 of 4 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com