CONTROL ACCESSORIES CONTROL ACCESSORIES S5 LEVEL PROBE HOLDER Single probe holder for use with probe rod of various lengths. This probe is particularly suitable for high temperature and/or high pressure applications. It is capable of operating at temperatures up to 200C (392F) and pressures up to 700PSI. Order part # S5. 36 Threaded Rod. Order part number S5/1. .26 " (6.5mm) 3.43 " (84mm) 1.83 " 1.14 " (46.5mm) (29mm) 1.93 " (49mm) #8 - 32 .51 " (13mm) NOTE: Internal Threading: 1/4 x 20 #3/8 - 18 Dry Seal S8 LEVEL PROBE The S8 probe will hold one, two or three 4mm probes. The S8 comes with three (3) one meter lengths of 4mm stainless steel rod. It comes equipped with a black SBS rubber protective top through which the leads are routed at a 90 angle. SPECIFICATIONS: Material - Holder . . . . . . . . . Polyamide Material - Top Boot . . . . . . . SBS (Styrene Butadiene) Wire Terminal . . . . . . . . . . . Stainless Steel with M2 x 4 brass screws Probe Holder . . . . . . . . . . . . Stainless steel Gasket . . . . . . . . . . . . . . . . . BB701 (Butadiene) Thread Size . . . . . . . . . . . . . 1/2 NPT Operating Temp . . . . . . . . . . 176F (80C) Max Pressure . . . . . . . . . . . 2 Kg/CM2 (28 PSI) Top Cover Probe Holder Screw, CB M2 x 4 Brass 1.70" (43mm) .275" (7mm) Electrode Bearer .472" (12mm) 1.02" (26mm) Thread .708" (18mm) Gasket, 24 x 31mm (thickness: 2mm) .157" (4mm) 1 to 3 Inox Rod:4mm .076" (2mm) Note: The end of the rod has to be threaded(#8-32) to fit the probe holder. L1 L2 L3 Products and specifications subject to change without notice. Order/Technical Support - Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com 2/98 CONTROL ACCESSORIES CONTROL ACCESSORIES DR - DIN-RAIL The DR-DIN-Rail material is an extruded aluminum material of the standard configuration, 35mm. Timers and Controls conveniently snap onto the track. Order part number "DR" which is available in 1 meter (39) lengths. Shown with S08, S11 and K11 sockets. 1.42" (36mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165" (4.19mm) 2.99" (76 mm) 2.01" 20 to 400 Amps AC 50/60 Hz 100 mA AC #20 AWG 24 long wires 600 VAC Fiberglass reinforced resin SPECIFICATIONS: . . . . . .984" (25mm) S08 ORDERING INFORMATION: L546 SERIES CURRENT TRANSFORMER * 50 to 500 Amps * Compatible with F3I and FWIT Series Input Current . . Output Current . Connections . . . Insulation Class Enclosure . . . . . 2 .571" (14.5mm) 1.46" .079" (37mm) (2mm) 1.69" (43mm) DIMENSIONS: SPECIFICATIONS: Input Current . . Output Current . Connections . . . Insulation Class Enclosure . . . . . .312" L595 SERIES CURRENT TRANSFORMER * 20 to 400 Amps * Compatible with IAR.T Series S11 + .1650" S08-600: 600 V, 10 A rated 8 pin socket-UL and CSA .82" .320" 1.295" 2.06" + .200" .980" .58" o .165" 1.14" (29mm) BND DIN Rail .315" (8mm) 1.575" The S08, and S11 are 8 and 11 pin sockets fabricated from a rugged, durable polycarbonate.* Mounting is with two 6/32 screws .250 or on .30 DIN-Rail, DR. Order part "S08" or "S11." 2.30" .2.2" (56mm) S08, S11 SCREW TERMINAL SOCKETS 50 to 500 Amps AC 50/60 Hz 5 Amps AC #16 AWG 24 long wires 600 VAC Molded thermoplastic Part Number L595-020 L595-050 L595-100 L595-200 L595-300 L595-400 Input Current 20 Amps 50 Amps 100 Amps 200 Amps 300 Amps 400 Amps .75 2.3 .75 DIMENSIONS: ORDERING INFORMATION: Part Number L546-050 L546-100 L546-200 L546-500 Input Current 50 Amps 100 Amps 200 Amps 500 Amps 1.10 2.54 1.10 Products and specifications subject to change without notice. Order/Technical Support - Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com 2/99 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Crouzet: L595020 L595200 S8 S5 DR