CONTROL ACCESSORIES CONTROL ACCESSORIES
Products and specifications subject to change without notice.
Order/Technical Support – Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com
2/98
S5 LEVEL PROBE HOLDER
Single probe holder for use with probe rod of various lengths. This
probe is particularly suitable for high temperature and/or high pressure
applications. It is capable of operating at temperatures up to 200°C
(392°F) and pressures up to 700PSI. Order part # S5.
36˝ Threaded Rod. Order part number S5/1.
NOTE: Internal Threading: 1/4 x 20
S8 LEVEL PROBE
The S8 probe will hold one, two or three 4mm probes. The S8
comes with three (3) one meter lengths of 4mm stainless steel rod.
It comes equipped with a black SBS rubber protective top through
which the leads are routed at a 90° angle.
SPECIFICATIONS:
Material - Holder . . . . . . . . . Polyamide
Material - Top Boot . . . . . . . SBS (Styrene Butadiene)
Wire Terminal . . . . . . . . . . . Stainless Steel with M2 x 4
brass screws
Probe Holder . . . . . . . . . . . . Stainless steel
Gasket . . . . . . . . . . . . . . . . . BB701 (Butadiene)
Thread Size . . . . . . . . . . . . . 1/2˝ NPT
Operating Temp . . . . . . . . . . 176°F (80°C)
Max Pressure . . . . . . . . . . . 2 Kg/CM2(28 PSI)
1.70"
(43mm)
.275"
(7mm)
.472"
(12mm)
.076"
(2mm)
.708"
(18mm)
.157"
(4mm)
L1
L2
L3
1.02"
(26mm)
Top Cover
Probe Holder
Screw, CB M2 x 4 Brass
Electrode Bearer
Thread
Gasket, 24 x 31mm (thickness: 2mm)
1 to 3 Inox Rod:4mm
Note: The end of
the rod has to be
threaded(#8-32) to
fit the probe holder.
3.43 "
(84mm)
1.83 "
(46.5mm)
1.14 "
(29mm)
.26 "
(6.5mm)
.51 "
(13mm)
#8 - 32
1.93 "
(49mm)
#3/8 - 18 Dry Seal
▲
CONTROL ACCESSORIES CONTROL ACCESSORIES
Products and specifications subject to change without notice.
Order/Technical Support – Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com
2/99
2
L546 SERIES
CURRENT TRANSFORMER
• 50 to 500 Amps
• Compatible with F3I and FWIT Series
SPECIFICATIONS:
Input Current . . . . . . . . . 50 to 500 Amps AC 50/60 Hz
Output Current . . . . . . . . 5 Amps AC
Connections . . . . . . . . . . #16 AWG 24˝ long wires
Insulation Class . . . . . . . 600 VAC
Enclosure . . . . . . . . . . . . Molded thermoplastic
ORDERING INFORMATION:
Part Number Input Current
L546-050 50 Amps
L546-100 100 Amps
L546-200 200 Amps
L546-500 500 Amps
DIMENSIONS:
DR – DIN-RAIL
The DR-DIN-Rail material is an extruded aluminum
material of the standard configuration, 35mm.
Timers and Controls conveniently snap onto the
track. Order part number “DR” which is available in
1 meter (39˝) lengths. Shown with S08, S11 and
K11 sockets.
S08, S11 SCREW TERMINAL
SOCKETS
The S08, and S11 are 8 and 11 pin sockets
fabricated from a rugged, durable polycarbonate.*
Mounting is with two 6/32 screws .250 or on
.30 DIN-Rail, DR. Order part “S08” or “S11.”
S08-600: 600 V, 10 A rated 8 pin socket-UL and CSA
2.30"
2.06"
2.01"
ø .165"
.58"
.82"
++
1.42"
(36mm)
.315"
(8mm)
.571"
(14.5mm)
.984"
(25mm)
1.14"
(29mm)
BND DIN Rail
2.99"
(76 mm)
1.46"
(37mm)
1.69"
(43mm)
.079"
(2mm)
.165"
(4.19mm)
.2.2"
(56mm)
.312"
.1650"
.980"
.200"
.320"
1.575"
1.295"
L595 SERIES
CURRENT TRANSFORMER
• 20 to 400 Amps
• Compatible with IAR.T Series
SPECIFICATIONS:
Input Current . . . . . . . . . 20 to 400 Amps AC 50/60 Hz
Output Current . . . . . . . . 100 mA AC
Connections . . . . . . . . . . #20 AWG 24˝ long wires
Insulation Class . . . . . . . 600 VAC
Enclosure . . . . . . . . . . . . Fiberglass reinforced resin
ORDERING INFORMATION:
Part Number Input Current
L595-020 20 Amps
L595-050 50 Amps
L595-100 100 Amps
L595-200 200 Amps
L595-300 300 Amps
L595-400 400 Amps
DIMENSIONS:
.75˝2.3˝
.75˝
1.10˝ 2.54˝
1.10˝
S11 S08
