Motors & DrivesApplied Motion
2035
APPLIED MOTION Drives
Full and Half Stepping also available.
Contact a Mouser Service Representative.
STEP MOTOR DRIVES
• Drives 4, 6, or 8 lead size 11, 14, 17 and 23 step motors
• Screw terminal connectors
• Dual H-bridge, inaudible PWM amplier
• Full or Half drive
• 70W of usable power
• 2.0A
2035
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Applied Motion
Part No. Fig. Motor
Current (Amps)
Voltage
Range
Step Resolution
per Revolution
Construction
Type
Price Each
1 5
834-2035 2035 A 0.125-2.0 12-35VDC 200/400 Open Frame 175.82 162.24
834-2035O 2035O A 0.125-2.0 12-35VDC 200/400 With Oscillator 229.18 211.45
834-2035XD 2035XD A 0.1-2.0 12-35VDC 200-50,800 2 Axis w/Oscillator 290.23 267.79
With Digital Oscillator
*
• Microstepping
• Drives 4, 6, or 8 lead size 11, 14, 17, 23, and 34 step motors
• MOSFET, dual H-bridge, inaudible PWM amplier
3540M
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Applied Motion
Part No. Fig. Motor
Current (Amps)
Voltage
Range
Step Resolution
per Revolution Usable Power Price Each
1 5
834-3540M 3540M C 0.4-3.5 12-42VDC 400-12,800 140 watts 264.21 243.77
*834-3540MO 3540MO C 0.4-3.5 12-42VDC 12,800 140 watts 323.27 298.27
mouser.com/appliedmotion (800) 346-6873
© Copyright 2016 Mouser Electronics
© Copyright 2016 Mouser Electronics
ST STEPPER DRIVES
A performance step drive with advanced current control, anti-resonance, torque ripple smoothing and microstep emulation.
• Microstep resolution: 200 - 51,200 steps per revolution.
Specications for S Series:
• Pulse & Direction
• CW/CCW Pulse
• A/B Quadrature
• Velocity (Oscillator) mode
• Host commands (SCL compatible)
• SiNet Hub compatible
• ST Congurator software
for setup
Specications for Si Series:
• Stand-alone Operation
• Q Programmer for complex motion
• Conditional Processing
• Math Functions
• Multi-tasking
• Register Manipulation
• Encoder Following
• “Generic” HMI compatibility
Protection:
• Over-Voltage
• Under-Voltage
• Over-Temp
• Motor Shorts
• Motor Open Phase
Recommended Stepper Motors for ST5: HT17-068, HT17-071, HT23-394 or HT23-401
Recommended Stepper Motors for ST10: HT34-485, HT34-486, or HT34-487 For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Applied Motion
Part No. Fig. Current Control
at 20 KHz
Power Supply
Required
Input Voltage
(VDC)
Output Current in 0.01
Amp Increments
Price
Each
834-ST5-S ST5-S-NN F 4 state PWM External 24-48VDC 18 - 53 0.1 - 5.0 amps 302.24
834-ST5-SI ST5-SI-NN G 4 state PWM External 24-48VDC 18 - 53 0.1 - 5.0 amps 490.39
834-ST10-S-NN ST10-S-NN F 4 state PWM External 24-80VDC 18 - 88 0.1 - 10.0 amps 395.32
834-ST10-SI-NN ST10-SI-NN G 4 state PWM External 24-80VDC 18 - 88 0.1 - 10.0 amps 580.46
A B C G
D E F
3535
• Full and Half Stepping
• 122W of usable power • 3.5A
• Drives 4, 6, or 8 lead size 11, 14, 17, and 23 step motors For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Applied Motion
Part No. Fig. Motor
Current (Amps)
Voltage
Range
Step Resolution
per Revolution
Construction
Type
Price Each
1 5
834-3535 3535 B 0.4-3.5 12-35VDC 200/400 Open Frame 225.18 207.77
• MOSFET, dual H-bridge, inaudible PWM amplier
PROGRAMMABLE STEP MOTOR DRIVE
The 1240i is a programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 48 watt microstepping amplier.
1240i
• Software and programming cable included For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Applied Motion
Part No. Fig. Motor
Current (Amps)
Voltage
Range
Step Resolution
per Revolution
Construction
Type
Price Each
1 5
834-1240 1240i D 0.2-1.2 12-42VDC 2,000-50,800 Open Frame 441.58 407.43
• Built-in Indexer
3540i
The 3540i is a programmable step motor driver suited for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt microstepping amplier.
• Software and programming cable included
• Built-in Indexer For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Applied Motion
Part No. Fig. Motor
Current (Amps)
Voltage
Range
Step Resolution
per Revolution
Construction
Type
Price Each
1 5
834-3540 3540i E 0.2-3.5 12-42VDC 2,000-50,800 Open Frame 427.34 394.30
• TUV Compliant
