© Semiconductor Components Industries, LLC, 2010
March, 2010 − Rev. 5
1Publication Order Number:
MUR3020WT/D
MUR3020WT,
MUR3040WTG,
MUR3060WT
SWITCHMODEt
Power Rectifiers
These state−of−the−art devices are designed for use in switching
power supplies, inverters and as free wheeling diodes.
Features
•Ultrafast 35 and 60 Nanosecond Recovery Time
•175°C Operating Junction Temperature
•Popular TO−247 Package
•High Voltage Capability to 600 V
•Low Forward Drop
•Low Leakage Specified @ 150°C Case Temperature
•Current Derating Specified @ Both Case and Ambient Temperatures
•Epoxy Meets UL 94 V−0 @ 0.125 in
•High Temperature Glass Passivated Junction
•Pb−Free Packages are Available*
Mechanical Characteristics:
•Case: Epoxy, Molded
•Weight: 4.3 Grams (Approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal Leads
are Readily Solderable
•Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
•Shipped 30 Units Per Plastic Tube
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
ULTRAFAST RECTIFIERS
30 AMPERES, 200−600 VOLTS
http://onsemi.com
TO−247
CASE 340L
PLASTIC
2
1
3
MARKING
DIAGRAM
MUR30x0WT
AYWWG
1
3
2, 4
MUR30x0WT = Device Code
x = 2, 4 or 6
A = Assembly Location
Y = Year
WW = Work Week
G=Pb−Free Package
Device Package Shipping
ORDERING INFORMATION
MUR3020WT TO−247 30 Units/Rail
MUR3060WT TO−247 30 Units/Rail
MUR3020WTG TO−247
(Pb−Free)
30 Units/Rail
MUR3060WTG TO−247
(Pb−Free)
30 Units/Rail
MUR3040WTG TO−247
(Pb−Free)
30 Units/Rail
MUR3020WT, MUR3040WTG, MUR3060WT
http://onsemi.com
2
MAXIMUM RATINGS (Per Leg)
Rating Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
200 400 600 V
Average Rectified Forward Current @ 145°C
Total Device
IF(AV) 15
30
A
Peak Repetitive Surge Current
(Rated VR, Square Wave, 20 kHz, TC = 145°C) IFM 30 A
Nonrepetitive Peak Surge Current (Surge applied at rated load
conditions, halfwave, single phase, 60 Hz) IFSM 200 150 150 A
Operating Junction and Storage Temperature TJ, Tstg −65 to +175 °C
THERMAL CHARACTERISTICS (Per Leg)
Maximum Thermal Resistance,
− Junction−to−Case
− Junction−to−Ambient
RqJC
RqJA
1.5
40
°C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Maximum Instantaneous Forward Voltage (Note 1)
(IF = 15 Amp, TC = 150°C)
(IF = 15 Amp, TC = 25°C)
VF0.85
1.05
1.12
1.25
1.4
1.7
V
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, TJ = 150°C)
(Rated DC Voltage, TJ = 25°C)
iR500
10
500
10
1000
10
mA
Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 Amps/ms) trr 35 60 60 ns
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤2.0%.
MUR3020WT, MUR3040WTG, MUR3060WT
http://onsemi.com
3
MUR3020WT
100
0.1
0.2
0.3
0.5
1
2
3
5
10
20
30
50
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
vF
, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage (Per Leg)
TJ = 150°C100°C
25°C
100
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
0 20 40 60 80 100 120 140 160 180 200
IR, REVERSE CURRENT ( A)μ
VR, REVERSE VOLTAGE (VOLTS)
Figure 2. Typical Reverse Current (Per Leg)*
TJ = 150°C
100°C
25°C
*The curves shown are typical for the highest voltage device in the voltage grouping.
Typical reverse current for lower voltage selections can be estimated from these same
curves if VR is sufficiently below rated VR.
16
14
12
10
8
6
4
2
0140 150 160 170 180
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TC, CASE TEMPERATURE (5C)
Figure 3. Current Derating, Case (Per Leg)
SQUARE WAVE
RATED VOLTAGE APPLIED
dc
14
12
10
8
6
4
2
00 20 40 60 80 100 120 140 160 180 200
TA, AMBIENT TEMPERATURE (5C)
Figure 4. Current Derating, Ambient (Per Leg)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
14
12
10
8
6
4
2
00
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 5. Power Dissipation (Per Leg)
246810
12 14 16
RqJA = 15°C/W AS OBTAINED
USING A SMALL FINNED
HEAT SINK.
dc
SQUARE WAVE
dc
RqJA = 40°C/W
AS OBTAINED IN FREE AIR
WITH NO HEAT SINK.
SQUARE WAVE
TJ = 125°C
SQUARE WAVE
20
10
dc
(RESISTIVE LOAD) IPK
IAV
= π
(CAPACITIVE LOAD) IPK
IAV
= 5
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
MUR3020WT, MUR3040WTG, MUR3060WT
http://onsemi.com
4
MUR3040WTG
100
0.1
0.2
0.3
0.5
1
2
3
5
10
20
30
50
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
vF
, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 6. Typical Forward Voltage (Per Leg)
100
0.01
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
0 50 100 150 200 250 300 350 400 450
5
IR, REVERSE CURRENT ( A)μ
VR, REVERSE VOLTAGE (VOLTS)
Figure 7. Typical Reverse Current (Per Leg)*
*The curves shown are typical for the highest voltage device in the voltage groupin
g
Typical reverse current for lower voltage selections can be estimated from these sam
curves if VR is sufficiently below rated VR.
16
14
12
10
8
6
4
2
0140 150 160 170
1
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TC, CASE TEMPERATURE (°C)
Figure 8. Current Derating, Case (Per Leg)
dc
14
12
10
8
6
4
2
00 120 140 160 180 200
TA, AMBIENT TEMPERATURE (°C)
Figure 9. Current Derating, Ambient (Per Leg)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
14
12
10
8
6
4
2
00
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 10. Power Dissipation (Per Leg)
246810
12 14
20
d
c
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TJ = 150°C
100°C25°C
TJ = 150°
C
100°C
25°C
SQUARE WAVE
RATED VOLTAGE APPLIED
RθJA = 15°C/W AS OBTAINED
USING A SMALL FINNED
HEAT SINK.
SQUARE WAVE
dc
dc
RθJA = 40°C/W
AS OBTAINED IN FREE AIR
WITH NO HEAT SINK.
SQUARE WAVE
20 40 60 80 100
(RESISTIVE-INDUCTIVE LOAD) IPK
IAV
= π
TJ = 125°C
SQUARE WAVE
10
(CAPACITIVE LOAD) IPK
IAV
= 5
MUR3020WT, MUR3040WTG, MUR3060WT
http://onsemi.com
5
MUR3060WT
100
0.1
0.2
0.3
0.5
1
2
3
5
10
20
30
50
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
vF
, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 11. Typical Forward Voltage (Per Leg)
100
0.02
0.05
0.1
0.2
0.5
1
2
5
10
20
50
150
IR, REVERSE CURRENT ( A)μ
VR, REVERSE VOLTAGE (VOLTS)
Figure 12. Typical Reverse Current (Per Leg)*
*The curves shown are typical for the highest voltage device in the voltage grouping.
Typical reverse current for lower voltage selections can be estimated from these same
curves if VR is sufficiently below rated VR.
16
14
12
10
8
6
4
2
0
140 150 160 170 180
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
TC, CASE TEMPERATURE (5C)
Figure 13. Current Derating, Case (Per Leg)
dc
10
9
0 120 140 160 180 200
TA, AMBIENT TEMPERATURE (5C)
Figure 14. Current Derating, Ambient (Per Leg)
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
16
14
12
10
8
6
4
2
00
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 15. Power Dissipation (Per Leg)
246810
12 14 16
dc
IF(AV), AVERAGE FORWARD CURRENT (AMPS)
100°C
25°C
TJ = 150°C
200 250 300 350 400 450 500 550 600 650
25°C
100°C
TJ = 150°C
SQUARE WAVE
RATED VOLTAGE APPLIED
dc
RqJA = 60°C/W
AS OBTAINED IN FREE AIR
WITH NO HEAT SINK.
SQUARE WAVE
SQUARE WAVE
dc
RqJA = 16°C/W AS OBTAINED
FROM A SMALL TO-220
HEAT SINK.
20 40 60 80 100
20
10
(CAPACITIVE LOAD) IPK
IAV
= 5
SQUARE WAVE
TJ = 125°C
IPK
IAV
= π
(RESISTIVE-INDUCTIVE LOAD)
200
8
7
6
5
4
3
2
1
0
MUR3020WT, MUR3040WTG, MUR3060WT
http://onsemi.com
6
0.01
0.02
0.05
0.1
0.2
0.5
1
0.01 0.02 0.05 0.1 0.2 0.5 1 2 5 10 20 50 100 200 500 1K
t, TIME (ms)
Figure 16. Thermal Response
D = 0.5
0.1
0.05
0.01
SINGLE PULSE
P(pk)
t1
t2
DUTY CYCLE, D = t1/t2
ZqJC(t) = r(t) RqJC
RqJC = 1.5°C/W MAX
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT T1
TJ(pk) - TC = P(pk) ZqJC(t)
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED)
1K
10
20
50
100
200
500
1 2 5 10 20 50 100
VR, REVERSE VOLTAGE (VOLTS)
Figure 17. Typical Capacitance (Per Leg)
C, CAPACITANCE (pF)
TJ = 25°C
MUR3020WT, MUR3040WTG, MUR3060WT
http://onsemi.com
7
PACKAGE DIMENSIONS
TO−247
CASE 340L−02
ISSUE E
N
P
A
K
W
F
D
G
U
E
0.25 (0.010) MYQS
J
H
C
4
123
−T−
−B−
−Y−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
2 PL
3 PL
0.63 (0.025) MTBM
−Q−
LDIM MIN MAX MIN MAX
INCHESMILLIMETERS
A20.32 21.08 0.800 8.30
B15.75 16.26 0.620 0.640
C4.70 5.30 0.185 0.209
D1.00 1.40 0.040 0.055
E1.90 2.60 0.075 0.102
F1.65 2.13 0.065 0.084
G5.45 BSC 0.215 BSC
H1.50 2.49 0.059 0.098
J0.40 0.80 0.016 0.031
K19.81 20.83 0.780 0.820
L5.40 6.20 0.212 0.244
N4.32 5.49 0.170 0.216
P--- 4.50 --- 0.177
Q3.55 3.65 0.140 0.144
U6.15 BSC 0.242 BSC
W2.87 3.12 0.113 0.123
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
MUR3020WT/D
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
