http://www.tracopower.com Page 1 of 9
AC/DC Power Modules
TPM Series, 5 to 40 Watt
Features
◆ PCB mounting with solder pins or chassis
mounting with screw terminals
◆ Single-, dual- and triple output models
◆ Universal input 85 – 264 VAC, 40 – 440 Hz
◆ EMI meets EN 55022, Class B and
FCC, Level B
◆ Low ripple and noise
◆ Over temperature protection
◆ Short circuit and overload protection
◆ Safety class II product
◆ 3-year product warranty
The TPM series switching power supplies, comprising 57 (!) standard models, offer
high power density in a fully encapsulated plastic case. This feature makes these
modules an ideal solution for all space critical applications in commercial and in-
dustrial electronic equipment. Full compliance to European low voltage and EMC
directive, UL and cUL safety approval qualifies this product for worldwide markets.
SMD-technology and an extensive production quality test guarantees a high relia-
bility of these power modules.
Order code Output power Output 1 Output 2 Output 3
PCB-mounting Chassis mounting max.
with solder pins with screw terminals
TPM 05105 5 VDC / 1000 mA
TPM 05112 12 VDC / 420 mA
TPM 05124 5 Watt 24 VDC / 210 mA
TPM 05212 +12 VDC / 250 mA –12 VDC / 150 mA
TPM 05215 +15 VDC / 150 mA –15 VDC / 150 mA
TPM 10105 TPM 10105C 5 VDC / 2000 mA
TPM 10112 TPM 10112C 12 VDC / 840 mA
TPM 10124 TPM 10124C 24 VDC / 420 mA
TPM 10212 TPM 10212C 10 Watt +12 VDC / 400 mA –12 VDC / 400 mA
TPM 10215 TPM 10215C +15 VDC / 300 mA –15 VDC / 300 mA
TPM 10512 TPM 10512C *5 VDC / 1200 mA +12 VDC / 120 mA –12 VDC / 120 mA
TPM 10515 TPM 10515C *5 VDC / 1200 mA +15 VDC / 100 mA –15 VDC / 100 mA
Models
p
re
p
ared
DC input (18 – 72 VDC) and other output voltages on request * Output floating
not recommended for new design in
http://www.tracopower.com Page 2 of 9
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
AC/DC Power Modules
TPM Series 5 to 40 Watt
Ordercode Output Power Output 1 Output 2 Output 3
PCB-mounting Chassis mounting max.
with solder pins with screw terminals
TPM 15105 TPM 15105C 5 VDC / 3000 mA
TPM 15112 TPM 15112C 12 VDC / 1300 mA
TPM 15124 TPM 15124C 24 VDC / 600 mA
TPM 15212 TPM 15212C 15 Watt +12 VDC / 600 mA –12 VDC / 400 mA
TPM 15215 TPM 15215C +15 VDC / 500 mA –15 VDC / 400 mA
TPM 15512 TPM 15512C *5 VDC / 1600 mA +12 VDC / 150 mA –12 VDC / 150 mA
TPM 15515 TPM 15515C *5 VDC / 1600 mA +15 VDC / 150 mA –15 VDC / 150 mA
TPM 30105 TPM 30105C 5 VDC / 6000 mA
TPM 30112 TPM 30112C 12 VDC / 2500 mA
TPM 30124 TPM 30124C 24 VDC / 1300 mA
TPM 30212 TPM 30212C +12 VDC / 1200 mA –12 VDC / 1200 mA
TPM 30215 TPM 30215C 30 Watt +15 VDC / 1000 mA –15 VDC / 1000 mA
TPM 30252 TPM 30252C *5 VDC / 3000 mA *12 VDC / 1200 mA
TPM 30254 TPM 30254C *5 VDC / 3000 mA *24 VDC / 600 mA
TPM 30512 TPM 30512C *5 VDC / 3000 mA +12 VDC / 600 mA –12 VDC / 600 mA
TPM 30515 TPM 30515C *5 VDC / 3000 mA +15 VDC / 500 mA –15 VDC / 500 mA
TPM 40105 TPM 40105C 5 VDC / 7000 mA
TPM 40112 TPM 40112C 40 Watt 12 VDC / 3300 mA
TPM 40124 TPM 40124C 24 VDC / 1800 mA
Models
DC input (18 – 72 VDC) and other output voltages on request * Output floating
Obsolete
Discontinued Y 2011
http://www.tracopower.com Page 3 of 9
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
AC/DC Power Modules
TPM Series 5 to 40 Watt
Input Specifications
Input voltage range 85 – 264 VAC (100–375 VDC)
Input frequency 40 – 440 Hz
Input current no load 115 VAC / 230 VAC
TPM 05 models: 18 mA / 13 mA typ.
TPM 10 models: 18 mA / 18 mA typ.
TPM 15 models: 18 mA / 18 mA typ.
TPM 30 models: 25 mA / 20 mA typ.
TPM 40 models: 20 mA / 17 mA typ.
Input current full load 115 VAC / 230 VAC
TPM 05 models: 100 mA / 60 mA typ.
TPM 10 models: 150 mA / 90 mA typ.
TPM 15 models: 220 mA / 118 mA typ.
TPM 30 models: 430 mA / 240 mA typ.
TPM 40 models: 600 mA / 320 mA typ.
External fuse (recommended) TPM 05 models: 0.5 A slow blow type
TPM 10 models: 1.0 A slow blow type
TPM 15 models: 1.0 A slow blow type
TPM 30 models: 2.0 A slow blow type
TPM 40 models: 3.15 A slow blow type
Output Specifications
Voltage set accuracy – Output 1 (main output) ±1 %
– Output 2/3 (aux. outputs) ±3 %
Regulation – Input variation 0.5 % max.
– Load variation (10–90%)
Single output models: 0.5 % max.
Dual/ triple output models: 0.5 % max. (symmetric load)
Minimum load Dual/ triple output models: 10 % (main output)
Ripple and noise (pk-pk, 20 Mhz Bandwidth) <2 % of Vout max.
Current limitation 105 – 130 % of Iout max., constant current
Short circuit protection hiccup mode, indefinite (automatic recovery)
Capacitive load 1000 µF (each output) TPM 05xxx only)
4700 µF (each output) all other models)
http://www.tracopower.com Page 4 of 9
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
AC/DC Power Modules
TPM Series 5 to 40 Watt
General Specifications
Temperature ranges – Operating –25°C to +70°C max.
– Case temperature +95°C max.
– Derating TPM 5/ 10/ 15 single output models: 2 %/K above 55°C
TPM 5/ 10/ 15 dual output models: 3 %/K above 55°C
TPM 10/ 15 triple output models: 5 %/K above 55°C
TPM 30/ 40 single output models: 2 %/K above 50°C
TPM 30 dual output models: 3 %/K above 50°C
TPM 30 triple output models: 5 %/K above 50°C
– Storage (non operating) –45°C to +100°C
Temperature coefficient 0.01 %/K
Efficiency 55 – 85 % (depending on model)
Humidity (non condensing) 95 % rel max.
Switching frequency (Puls width modulation PWM) TPM 5 models: 125 kHz typ.
TPM 10 / 15 / 30 models: 90 kHz typ.
TPM 40 models: 70 kHz typ.
Hold-up time – Vin = 115 VAC 50 ms min.
– Vin = 230 VAC 50 ms min.
I/O isolation voltage (50 Hz 60 sec.) 3‘300 VAC
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >800‘000 h
EMI / RFI conducted EN 55022, class B, FCC part 15, level B
EMC compliance – Electrostatic discharge ESD IEC/EN 61000-4-2 4 kV / 8 kV
– RF field susceptibility IEC/EN 61000-4-3 10 V/m
– Electrical fast transients/bursts on mainsline IEC/EN 61000-4-4 2 kV
– Surge IEC/EN 61000-4-5 2 kV sym.
– Immunity to conducted RF disturbances IEC/EN 61000-4-6 10 V
– Immunity to voltage dips, short interruptions
and voltage variations IEC/EN 61000-4-11
Safety Class II to IEC/EN 60536
Safety standards UL 1950, IEC/EN 60950
Safety approvals – UL/cUL www.ul.com > UL File no.: e188913
Casing material CELANEX 2360 FL (UL94V-0 rated)
http://www.tracopower.com Page 5 of 9
AC/DC Power Modules
TPM Series 5 to 40 Watt
Outline Dimensions mm (inches)
50.8 ±0.5
(2.0 ±0.02)
Bottom view
12
345
22 ±0.4
(0.87 ±0.016)
22 ±0.4
(0.87 ±0.016)
3.4 ±0.4
(0.13 ±0.016)
50.8
±0.5
(2.0
±0.02
)
15 ±0.4
(0.6 ±0.016)
15.4 ±0.4
(0.61 ±0.016)
32 ±0.4
1.26 ±0.016)
20
±0.5
(0.89 ±0.02)
4
(0.16)
3.4
(0.13)
PCB-mounting with solder pins
TPM 5 W
Pin diameter ø 1.0 ±0.1 (0.039 ±0.004) Weight TPM 5 100 g (0.22 lb)
Pin Single Dual
1AC in AC in
2AC in AC in
3–V out –V out
4no pin Common
5+V out +V out
Pin-Out
AC/DC Power Modules
TPM Series 5 to 40 Watt
http://www.tracopower.com Page 6 of 9
Outline Dimensions mm (inches)
PCB-mounting with solder pins
TPM 10/15 W
Pin diameter ø 1.0 ±0.1 (0.039 ±0.004) Weight TPM 10 150 g (0.33 lb)
TPM 15 150 g (0.33 lb)
Pin Single Dual Triple
1–V out –V out –V out 3
2No Pin No Pin –V out 1
3No Pin Common Com. 2/3
4No Pin No Pin +V out 1
5+V out +V out +V out 2
6AC in AC in AC in
7AC in AC in AC in
Pin-Out
Bottom view
7
1
2
3
4
5
6
Self cutting screws ø 3.5 mm (0.14)
8 mm
(0.31) depth max.
76
±0.5
(3.0 ±0.02)
66
±0.2
(2.6 ±0.008)
5
(0.2)
50.8
±0.5
(2.0 ±0.02)
25.4
±0.4
(1.0 ±0.016)
12.7 ±0.4
(0.5
±0.016
)
38
±0.5
(1.5 ±
0.02
)
35.0
±0.4
(1.35 ±0.016)
5
(0.2)
10 .2
(0.4)
10.2
(0.4)
22.7
±0.2
(0.89 ±0.008)
10
(0.4)(0.4)
10.2
1
0.2
+0.4
(0.39
+0.16
)
AC/DC Power Modules
TPM Series 5 to 40 Watt
http://www.tracopower.com Page 7 of 9
Outline Dimensions mm (inches)
PCB-mounting with solder pins
TPM 30/ 40 W
Pin diameter ø 1.25 ±0.1 (0.05 ±0.004) Weight TPM 30 340 g (0.75 lb)
TPM 40 340 g (0.75 lb)
Pin Single
Dual sym. Dual asym.
Triple
1No Pin –V out –V out 1 –V out 3
2No Pin No Pin +V out 1 –V out 1
3–V out Common No Pin Com. 2/3
4No Pin No Pin –V out 2 +V out 1
5+V out +V out +V out 2 +V out 2
6AC in AC in AC in AC in
7AC in AC in AC in AC in
Pin-Out
Bottom view
6
1
2
3
4
5
Self cutting screws ø 3.5 mm (0.14)
8.0 mm (0.31)
depth max.
65 ±0.5
(2.56 ±0.02)
90
±0.5
(3.5 ±0.02)
81 ±0.4
(3.19 ±0.016)
45
(1.77)
4.5
(0.18)
4.5
(0.18)
56 ±0.4
(2.21 ±0.016)
25.4 ±0.4
(1.0 ±0.016)
7
4.5
(0.18)
15.3
(0.6)
12.7
(0.5)
33
±0.5
(0.89 ±0.02 )
10
(0.39
+0.16
)
35
±0.4
(1.38 ±0.016)
15.3
(0.6)
12.7
(0.5)
+4
AC/DC Power Modules
TPM Series 5 to 40 Watt
http://www.tracopower.com Page 8 of 9
Outline Dimensions mm (inches)
Chassis mounting with screw terminals
TPM 10/15 W C
Connection: wire diameter ø 0.2 – 2.5 mm2 (AWG 24 – 14) Weight TPM 10 C 200 g (0.44 lb)
TPM 15 C 200 g (0.44 lb)
Pin Single Dual Triple
1No Terminal No Terminal –V out 3
2No Terminal No Terminal –V out 1
3No Terminal –V out Com. 2/3
4–V out Common +V out 1
5+V out +V out +V out 2
6AC in AC in AC in
7AC in AC in AC in
Pin-Out
Side view
1
2
3
4
5
7
6
Top view
50.8
(2.0
110
(4.33
23
(0.91
39
(1.54)
6
(0.24)
95
(3.74)
7.5
(0.3)
ø 4.5
(ø 1.8)
±0.5
±0.02)
±0.5
±0.02
)
±0.2
±0.008)
Page 9 of 9
Outline Dimensions mm (inches)
AC/DC Power Modules
TPM Series 5 to 40 Watt
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
www.tracopower.com
Chassis mounting with screw terminals
TPM 30/ 40 W C
Connection: wire diameter ø 0.2 – 2.5 mm2 (AWG 24 – 14)
Weight TPM 30 380 g (0.84 lb)
TPM 40 380 g (0.84 lb)
Pin Single Dual sym. Dual asym. Triple
1No Terminal No Terminal No Terminal –V out 3
2No Terminal No Terminal –V out 1 –V out 1
3No Terminal –V out +V out 1 Com. 2/3
4–V out Common –V out 2 +V out 1
5+V out +V out +V out 2 +V out 2
6AC in AC in AC in AC in
7AC in AC in AC in AC in
Pin-Out
Side view
1
2
3
4
5
7
6
Top view
65
±0.5
(2.56
±0.02)
105.5
(4.15)
33
(1.3)
6
(0.24)
53
(2.09
)
115
(4.53)
120
(4.72
4.75
(0.19)
4.2
(0.17)
5.5
(0.22)
±0.5
±
0.02
)
Rev. October 11. 2013
