Power Inductors Power Choke Coil for Automotive application Series: PCC-M0530M (MC) PCC-M0630M (MC) PCC-M0754M (MC) PCC-M0854M (MC) PCC-M1054M (MC) PCC-M1050ML (MC) PCC-M0540M (MC) PCC-M0645M (MC) PCC-M0850M (MC) PCC-M1050M (MC) PCC-M1060ML (MC) Realize high heat resistance and high reliability with metal composite core(MC) Industrial Property : patents 21 (Registered 2/Pending 19) Features High bias current Temp. stability Low buzz noise High efficiency AEC-Q200 qualified RoHS compliant : Operation up to 150 C : High vibration resistance due to newly developed integral construction and severe reliability condition of automotive application is covered : Excellent inductance stability by using ferrous alloy magnetic material(Fig.1) : Excellent inductance stability in wide temp. range (Fig.1) : New metal composite core technology : Low RDC of winding and low eddy-current loss of the core Fig.1 Inductance v.s. DC current, Temp. ETQP5M470YFM(reference) 60.0 50.0 Inductance (H) High heat resistance High-reliability 40.0 30.0 25 C 100 C 125 C 150 C 20.0 10.0 0.0 0.0 0.5 1.0 1.5 2.0 IDC (A) 2.5 3.0 Recommended Applications Noise filter for various drive circuitry requiring high temp. operation and peak current handling capability converters DC/DC Standard Packing Quantity (Minimum Quantity/Packing Unit) 1,000 pcs./box (2 reel) : PCC-M0645M, M0754M, M0854M, M0850M, M1054M, M1050M, M1050ML, M1060ML 2,000 pcs./box (2 reel) : PCC-M0530M, M0540M, M0630M Explanation of Part Numbers 1 2 3 4 E T Q P Product Code 5 Classification Height 6 7 8 M Winding Inductance 4R7 4.7 H 220 22 H 101 100 H 9 10 11 Y F Core Suffix P N M K C 12 Size 5 mm size 6 mm size 7 mm size 8 mm size 10 mm size Temperature rating Operating temperature range Storage condition After PWB mounting Before PWB mounting Tc : -40 C to +150 C(Including self-temperature rise) Ta : -5 C to +35 C 85%RH max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors 1. Series PCC-M0530M/PCC-M0540M (ETQP3MYFP/ETQP4MYFP) Standard Parts Series Part No. PCC-M0530M [5.5x5.0x3.0(mm)] PCC-M0540M [5.5x5.0x4.0(mm)] ETQP3M2R2YFP ETQP3M3R3YFP ETQP4M4R7YFP ETQP4M220YFP Inductance 1 L0 Tolerance (H) (%) 2.2 3.3 20 4.7 22 DCR (at 20 C) (m) Typ. Tolerance (max.) (%) 22.6 (24.8) 31.3 (34.4) 10 36.0 (39.6) 163 (179) Rated Current (Typ. : A) T=40K L=-30% (2) (3) (4) 4.8 5.8 10.9 4.1 5.0 8.6 4.0 4.8 7.7 1.9 2.3 3.1 (1) Measured at 100 kHz. (2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also (5) (3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 52 K/W measured on 5.5x5.0x3.0 mm case size and approx. 48 K/W measured on 5.5x5.0x4.0 mm case size. See also (5) (4) Suturation rated current : DC current which causes L(0) drop -30 %. (5) Within a suitable application, the part's temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Reference) Inductance vs DC Current ETQP3M2R2YFP 2.0 1.5 1.0 0.5 0.0 0 2 4 Inductance (H) 2.0 1.0 4 6 8 IDC (A) 10 12 80 70 60 50 40 30 20 10 0 PWB condition A PWB condition B 1 2 3 4 5 IDC (A) 6 7 8 ETQP4M4R7YFP PWB condition A PWB condition B 0 1 2 3 4 IDC (A) 0 2 4 6 8 IDC (A) 10 12 14 ETQP4M220YFP 25 20 15 10 5 0 1 2 3 4 5 PWB condition A : Four-layer PWB (1.6 mm FR4), See also (2) PWB condition B : Multilayer PWB with high heat dissipation performance. See also (3) ETQP3M2R2YFP 0 1.0 IDC (A) Temperature vs DC Current 80 70 60 50 40 30 20 10 0 2.0 0 14 T(K) Case 2 3.0 30 3.0 0 4.0 0.0 14 T(K) Inductance (H) 12 4.0 0.0 T(K) 10 ETQP4M4R7YFP 5.0 T(K) 6 8 IDC (A) ETQP3M3R3YFP 5.0 Inductance (H) Inductance (H) 2.5 5 6 7 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 ETQP3M3R3YFP PWB condition A PWB condition B 0 1 2 3 4 IDC (A) 5 6 7 3 3.5 ETQP4M220YFP PWB condition A PWB condition B 0 0.5 1 1.5 2 IDC (A) 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors 2. Series PCC-M0630M/PCC-M0645M (ETQP3MYFN/ETQP4MYFN) Standard Parts Series Part No. DCR (at 20 C) (m) Inductance 1 L0 Tolerance Typ. Tolerance (H) (%) (max.) (%) 0.68 6.3 (6.9) 1.0 7.9 (8.7) 20 10 6.8 39.3 (43.2) 10 54.2 (59.6) 47 210 (231) Rated Current (Typ. : A) T=40K L=-30% (2) (3) (4) 9.8 12.0 24.0 8.8 10.7 20.0 4.1 5.2 10.0 3.3 4.5 8.3 1.8 2.2 3.8 ETQP3MR68YFN ETQP3M1R0YFN ETQP4M6R8YFN PCC-M0645M [6.5x6.0x4.5(mm)] ETQP4M100YFN ETQP4M470YFN (1) Measured at 100 kHz. (2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also (5) (3) DC current which causes temperature rise of 40 K. Partsare soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 44 K/W measured on 6.5x6.0x3.0 mm case size and approx. 37 K/W measured on 6.5x6.0x4.5 mm case size. See also (5) (4) Suturation rated current : DC current which causes L(0) drop -30 %. (5) Within a suitable application, the part's temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. PCC-M0630M [6.5x6.0x3.0(mm)] Performance Characteristics (Reference) Inductance (H) 0.6 0.5 0.4 0.3 0.2 0.1 0 0 T(K) 12 16 IDC (A) 20 ETQP4M6R8YFN 80 70 60 50 40 30 20 10 0 Inductance (H) PWB condition A PWB condition B 0 2 4 6 8 10 12 14 16 18 IDC (A) ETQP4M6R8YFN PWB condition A PWB condition B 2 3 4 IDC (A) 5 6 0.2 0 7 5 10 IDC (A) 15 20 ETQP4M100YFN 10 8 6 4 2 0 1 2 3 4 5 6 7 8 9 IDC (A) 50 45 40 35 30 25 20 15 10 5 0 ETQP4M470YFN 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 IDC (A) PWB condition A : Four-layer PWB (1.6 mm FR4), See also (2) PWB condition B : Multilayer PWB with high heat dissipation performance. See also (3) ETQP3MR68YFN 1 0.4 0 0 1 2 3 4 5 6 7 8 9 10 IDC (A) 0 0.6 12 Temperature vs DC Current 80 70 60 50 40 30 20 10 0 0.8 0 24 T(K) T(K) Case 8 T(K) Inductance (H) 8 7 6 5 4 3 2 1 0 4 ETQP3M1R0YFN 1 Inductance (H) 0.7 Inductance (H) vs DC Current ETQP3MR68YFN 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 ETQP3M1R0YFN PWB condition A PWB condition B 0 2 4 6 8 10 12 14 16 18 IDC (A) ETQP4M100YFN PWB condition A PWB condition B T(K) Inductance 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 IDC (A) 80 70 60 50 40 30 20 10 0 ETQP4M470YFN PWB condition A PWB condition B 0 0.5 1.0 1.5 2.0 2.5 3.0 IDC (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors 3. Series PCC-M0754M (ETQP5MYFM) Standard Parts Series Part No. PCC-M0754M [7.5x7.0x5.4(mm)] ETQP5M4R7YFM ETQP5M100YFM ETQP5M220YFM ETQP5M330YFM ETQP5M470YFM Inductance 1 L0 Tolerance (H) (%) 4.7 10 20 22 33 48 DCR (at 20 C) (m) Typ. Tolerance (max.) (%) 20(23) 37.6(4.13) 10 92(102) 120(132) 156(172) Rated Current (Typ. : A) T=40K L=-30% (2) (3) (4) 6.3 8.0 13.1 4.7 5.7 10.6 3.0 3.7 5.8 2.6 3.3 4.8 2.3 2.9 4.1 (1) Measured at 100 kHz. (2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also (5) (3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant is approx. 31 K/W measured on 7.5x7.0x5.4 mm case size. See also (5) (4) Suturation rated current : DC current which causes L(0) drop -30 %. (5) Within a suitable application, the part's temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Reference) 4.0 3.0 2.0 1.0 0 15 Inductance (H) 20 10 2 4 IDC (A) 6 Temperature vs DC Current 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 PWB condition A PWB condition B 2 4 6 IDC (A) 8 10 ETQP5M330YFM PWB condition A PWB condition B 0 1 2 3 IDC (A) 4 4 2 0 5 2 4 6 20 15 10 5 0 8 10 12 14 16 IDC (A) 0 2 4 6 IDC (A) 8 10 ETQP5M470YFM 50 40 30 20 10 0 1 2 3 4 IDC (A) 5 6 PWB condition A : Four-layer PWB (1.6 mm FR4), See also (2) PWB condition B : Multilayer PWB with high heat dissipation performance. See also (3) ETQP5M4R7YFM 0 6 0 8 T(K) Case 0 8 60 30 0 10 0 20 T(K) Inductance (H) 10 IDC (A) ETQP5M330YFM 40 T(K) 5 ETQP5M220YFM 25 Inductance (H) 5.0 0.0 ETQP5M100YFM 12 Inductance (H) Inductance (H) 6.0 T(K) vs DC Current ETQP5M4R7YFM 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 ETQP5M100YFM PWB condition A PWB condition B T(K) Inductance 0 1 2 3 4 5 IDC (A) 6 7 8 80 70 60 50 40 30 20 10 0 ETQP5M220YFM PWB condition A PWB condition B 0 1 2 3 IDC (A) 4 5 ETQP5M470YFM PWB condition A PWB condition B 0 1 2 IDC (A) 3 4 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors 4. Series PCC-M0854M/PCC-M0850M (ETQP5MYFK/ETQP5MYGK) Standard Parts Series Part No. PCC-M0854M [8.5x8.0x5.4(mm)] ETQP5M2R5YFK ETQP5M100YFK ETQP5M220YFK ETQP5M470YFK Inductance 1 DCR (at 20 C) (m) L0 Tolerance Typ. Tolerance (H) (%) (max.) (%) 2.5 7.6(8.4) 10 33(37) 22 63(70) 20 10 48 125(138) PCC-M0850M [8.5x8.0x5.0(mm)] ETQP5M101YGK 100 Rated Current (Typ. : A) T=40K L=-30% (2) (3) (4) 11.9 14.0 20.1 5.7 6.7 13.0 4.1 4.8 6.9 2.9 3.4 5.4 302(333) 1.7 2.1 3.0 (1) Measured at 100 kHz. (2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also (5) (3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 27 K/W measured on 8.5x8.0x5.4 mm case size and approx. 29 K/W measured on 8.5x8.0x5.0 mm case size. See also (5) (4) Suturation rated current : DC current which causes L(0) drop -30 %. (5) Within a suitable application, the part's temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of + 150 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Reference) 2.0 1.5 1.0 0.5 0 25 Inductance (H) 20 10 PWB condition A PWB condition B 4 8 12 IDC (A) 16 20 ETQP5M470YFK PWB condition A PWB condition B 0 1 2 3 IDC (A) 4 5 10 5 0 6 8 10 12 14 16 IDC (A) 0 2 4 6 IDC (A) 8 10 ETQP5M101YGK 60 40 20 0 1 2 3 IDC (A) 4 5 PWB condition A : Four-layer PWB (1.6 mm FR4), See also (2) PWB condition B : Multilayer PWB with high heat dissipation performance. See also (3) ETQP5M2R5YFK 0 4 15 80 0 8 Temperature vs DC Current 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 6 0 2 20 100 T(K) Case 4 IDC (A) 2 120 30 2 4 30 40 0 6 T(K) Inductance (H) 15 20 IDC (A) 50 0 T(K) 10 ETQP5M470YFK 60 T(K) 5 8 0 ETQP5M220YFK 25 10 Inductance (H) 2.5 0.0 ETQP5M100YFK 12 Inductance (H) 3.0 Inductance (H) vs DC Current ETQP5M2R5YFK 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 ETQP5M100YFK PWB condition A PWB condition B T(K) Inductance 0 2 4 6 IDC (A) 8 10 80 70 60 50 40 30 20 10 0 ETQP5M220YFK PWB condition A PWB condition B 0 1 2 3 4 IDC (A) 5 6 7 ETQP5M101YGK PWB condition A PWB condition B 0 0.5 1.0 1.5 2.0 2.5 3.0 IDC (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors 5. Series PCC-M1054M/PCC-M1050M (ETQP5MYFC/ETQP5MYGC) Standard Parts Inductance 1 Series Part No. ETQP5M1R5YFC ETQP5M2R5YFC ETQP5M3R3YFC PCC-M1054M ETQP5M4R7YFC [10.7x10.0x5.4(mm)] ETQP5M100YFC ETQP5M220YFC ETQP5M330YFC PCC-M1050M ETQP5M101YGC [10.7x10.0x5.0(mm)] L0 (H) Tolerance (%) 1.45 2.5 3.3 4.7 10 22 32.5 20 97 DCR (at 20 C) (m) Typ. (max.) Rated Current (Typ. : A) T=40K L=-30% (2) (3) (4) 17.9 21.4 35.1 15.1 18.1 27.2 13.1 15.7 22.7 10.9 13.1 20.0 7.1 8.5 10.7 5.2 6.2 8.8 4.2 5.0 7.6 Tolerance (%) 3.8(4.2) 5.3(5.9) 7.1(7.9) 10.2(11.3) 23.8(26.2) 45(50) 68.5(75.4) 10 208(229) 2.2 2.7 3.0 (1) Measured at 100 kHz. (2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also ( 5) (3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 23 K/W measured on 10.7x10.0x5.4 mm case size and approx. 26 K/W measured on 10.7x10.0x5.0 mm case size. See also ( 5) (4) Suturation rated current : Dc current which causes L(0) drop -30 %. ( 5) Within a suitable application, the part's temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. Performance Characteristics (Reference) ETQP5M1R5YFC 1.2 0.8 0.4 0 20 IDC (A) 30 2.0 1.5 1.0 0.5 0.0 40 0 10 20 IDC (A) 30 2 1 10 IDC (A) 15 0 6 4 2 0 5 10 15 20 IDC (A) 25 30 ETQP5M220YFC 8 20 ETQP5M330YFC 40 1 25 10 Inductance (H) 3 5 2 ETQP5M100YFC 4 0 3 0 40 12 5 0 2.5 ETQP5M4R7YFC 6 Inductance (H) 10 ETQP5M3R3YFC 4 Inductance (H) 0 ETQP5M2R5YFC 3.0 Inductance (H) Inductance (H) 1.6 0 2 4 6 8 10 12 14 16 IDC (A) 20 15 10 5 0 0 2 4 6 IDC (A) 8 10 ETQP5M101YGC 120 100 Inductance (H) Inductance (H) vs DC Current Inductance (H) Inductance 30 20 10 0 0 2 4 6 IDC (A) 8 10 80 60 40 20 0 0 1 2 3 4 IDC (A) 5 6 7 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors 80 70 60 50 40 30 20 10 0 T(K) PWB condition A PWB condition B 0 5 10 15 20 IDC (A) 25 30 ETQP5M4R7YFC PWB condition A PWB condition B 0 80 70 60 50 40 30 20 10 0 4 8 12 IDC (A) 16 20 ETQP5M330YFC PWB condition A PWB condition B 0 1 2 3 4 IDC (A) 5 6 7 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 ETQP5M2R5YFC PWB condition A PWB condition B T(K) ETQP5M1R5YFC T(K) 80 70 60 50 40 30 20 10 0 PWB condition A : Four-layer PWB (1.6 mm FR4), See also (2) PWB condition B : Multilayer PWB with high heat dissipation performance. See also (3) 0 5 10 15 IDC (A) 20 25 ETQP5M100YFC PWB condition A PWB condition B T(K) Temperature vs DC Current T(K) T(K) T(K) T(K) Case 0 2 4 6 8 IDC (A) 10 12 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 ETQP5M3R3YFC PWB condition A PWB condition B 0 4 8 12 16 IDC (A) 20 24 ETQP5M220YFC PWB condition A PWB condition B 0 2 4 6 IDC (A) 8 10 ETQP5M101YGC PWB condition A PWB condition B 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 IDC (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors 6. Series PCC-M1050ML/PCC-M1060ML (ETQP5MYLC/ETQP6MYLC) Standard Parts Series Inductance 1 L0 Tolerance (H) (%) 0.68 1.0 20 2.5 3.3 Part No. DCR (at 20 C) (m) Typ. Tolerance (max.) (%) 1.75(1.93) 2.3(2.53) 10 4.5(5.0) 6.0(6.6) Rated Current (Typ. : A) T=40K L=-30% (2) (3) (4) 26.3 31.5 42.0 23.0 27.5 38 16.3 19.6 27.0 14.2 17.0 26.0 ETQP5MR68YLC ETQP5M1R0YLC ETQP6M2R5YLC ETQP6M3R3YLC ( 1) Measured at 100 kHz. (2) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on four-layer PWB (1.6 mm FR4) and measured at room temperature. See also ( 5) (3) DC current which causes temperature rise of 40 K. Parts are soldered by reflow on multilayer PWB with high heat dissipation performance. Note: Heat radiation constant are approx. 23 K/W measured on 10.9x10.0x5.0 mm case size and approx. 23 K/W measured on 10.9x10.0x6.0 mm case size. See also ( 5) (4) Suturation rated current : Dc current which causes L(0) drop -30 %. ( 5) Within a suitable application, the part's temperature depends on circuit design and certain heat dissipation conditions. This should be double checked in a worst case operation mode. In normal case, the max.standard operating temperature of +150 C should not be exceeded. For higher operating temperature conditions, please contact Panasonic representative in your area. PCC-M1050ML [10.9x10.0x5.0(mm)] PCC-M1060ML [10.9x10.0x6.0(mm)] Performance Characteristics (Reference) vs DC Current ETQP5MR68YLC 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 10 20 Inductance (H) 2.0 1.5 1.0 0.5 10 20 IDC (A) 30 40 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 ETQP5MR68YLC PWB condition A PWB condition B 0 5 10 15 20 25 IDC (A) 30 35 40 45 ETQP6M2R5YLC PWB condition A PWB condition B 0 4 8 12 16 IDC (A) 20 0.8 0.6 0.4 0.2 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 10 20 30 IDC (A) 40 50 60 ETQP6M3R3YLC 0 5 10 15 20 IDC (A) 25 30 35 40 PWB condition A : Four-layer PWB (1.6 mm FR4), See also (2) PWB condition B : Multilayer PWB with high heat dissipation performance. See also (3) Temperature vs DC Current T(K) Case 0 1.0 0.0 60 T(K) Inductance (H) 50 2.5 0.0 T(K) 40 ETQP6M2R5YLC 3.0 T(K) 30 IDC (A) ETQP5M1R0YLC 1.2 Inductance (H) Inductance (H) Inductance 24 28 80 70 60 50 40 30 20 10 0 80 70 60 50 40 30 20 10 0 ETQP5M1R0YLC PWB condition A PWB condition B 0 5 10 15 20 IDC (A) 25 30 35 ETQP6M3R3YLC PWB condition A PWB condition B 0 5 10 15 IDC (A) 20 25 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors Dimensions in mm (not to scale) Dimensional tolerance unless noted : 0.5 Series PCC-M0530M Series PCC-M0540M Series PCC-M0630M Series PCC-M0645M Suffix Suffix 0.1 min. H Series M0530M M0540M 1.2 1.5 Date Code Polarity H 3.0 max. 4.0 max. Series M0630M M0645M 0.1 min. H 1.2 Date Code Polarity 6.00.4 3.00.3 Inductance 6.50.4 5.00.4 Inductance 5.50.4 (ETQP3MYFN/ETQP4MYFN) 3.00.3 (ETQP3MYFP/ETQP4MYFP) Series PCC-M0754M 1.5 H 3.0 max. 4.5 max. Series PCC-M0854M Series PCC-M0850M (ETQP5MYFM) (ETQP5MYFK/YGK) Inductance 7.50.4 Inductance Suffix 2.0 Polarity 2.0 0.1 min. H Series PCC-M1054M Series PCC-M1050M 7.30.3 1.8 Polarity H H 5.4 max. 5.0 max. Date Code 0.5 min. H 0.1 min. Series M1054M M1050M 2.0 Suffix 10.00.4 4.20.3 10.00.4 Inductance 10.90.6 2.0 H 5.4 max. 5.0 max. (ETQP5MYLC/ETQP6MYLC) Suffix Polarity Series M0854M M0850M 2.0 Series PCC-M1050ML Series PCC-M1060ML (ETQP5MYFC/YGC) Date Code 2.0 Polarity 0.1 min. 5.4 max. Date Code Inductance 10.70.5 3.00.3 8.00.4 3.00.3 7.00.4 Date Code Suffix 8.50.4 1.8 Series H M1050ML 5.0 max. M1060ML 6.0 max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Power Inductors Recommended Land Pattern in mm (not to scale) Dimensional tolerance unless noted : 0.5 Series PCC-M0530M Series PCC-M0540M (ETQP3MYFP/ETQP4MYFP) Series PCC-M0630M Series PCC-M0645M Series PCC-M0754M (ETQP5MYFM) (ETQP3MYFN/ETQP4MYFN) 8.4 7.1 3.6 8.0 3.6 7.0 3.6 6.0 6.1 2.2 2.8 2.8 7.2 10.0 8.8 Don't wire on the pattern on shaded portion the PWB. The same as the left. Series PCC-M0854M Series PCC-M0850M Series PCC-M1054M Series PCC-M1050M (ETQP5MYFK/YGK) Series PCC-M1050ML Series PCC-M1060ML (ETQP5MYFC/YGC) (ETQP5MYLC/ETQP6MYLC) 11.7 7.9 11 11.9 4.8 11 4.0 9.0 9.4 The same as the left. 3.8 6.1 6.5 12.4 13.7 13.9 Don't wire on the pattern on shaded portion the PWB. The same as the left. The same as the left. As for Packaging Methods, Soldering Conditions and Safety Precautions (Power Choke Coils for Automotive application), Please see Data Files Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Dec. 2014 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: ETQ-P3M1R0YFN ETQ-P4M4R7YFP ETQ-P5M100YFM ETQ-P3M2R2YFP ETQ-P5M1R5YFC ETQ-P6M2R5YLC ETQ-P5MR68YLC ETQ-P4M470YFN ETQ-P6M3R3YLC ETQ-P4M220YFP ETQ-P4M6R8YFN ETQ-P5M101YGK ETQ-P3M3R3YFP ETQ-P5M1R0YLC ETQ-P4M100YFN ETQ-P5M100YFC