Mini-Circuits - Specification for Transformer - TMO1.5-1 RF Transformer Configuration Type: TMO1.5-1 Insertion Loss Frequency MHz RATIO 1.50 0.10-300 3 dB MHz 2 dB MHz 1 dB MHz Case ConnStyle ection 0.10-300 0.20-150 0.50-80 A11 fb Notes: Pin Connections Primary Primary Second- Second- Second- Gnd Case Not * Absolute power, voltage and current ratings: Port Primary RF input power: 0.25 Watt rating Dot CT ary Dot ary ary CT Ext. Gnd Used DC current, 30mA. fb 1 5 2 6 7,8 3,4 * Impedance ratio = secondary/primary * Insertion loss referenced to mid-band loss * General Quality Control Procedures and Environmental Specifications are given in Mini-Circuits Guarantees Quality. Hi-Rel, MIL description are given in Hi-Rel and MIL * Prices and Specifications subjects to change without notice. FREQ. Insertion Input Return (MHz) Loss(dB) Loss(dB) Case Style - A11 (inch,mm ) weight: 1.9 grams. A B C D E F G H J .480 .500 .240 .255 .210 .230 .100 .20 .14 12.192 12.700 6.096 6.477 5.334 5.842 2.540 5.080 3.556 K L M N P Q R S T .020 0.508 Tolerance: .x .1 .xx .03 .xxx .015 inch. Material and Finish: Header material: C.R.S. Pin material: #52 alloy. Finish: electro tin, hotoil flowed. Cover material:upro-nickel. Mounting: Insulated spacer available. Request P/N B-14-047-01. 0.100 2.00 7.10 0.846 0.60 15.20 4.001 0.39 20.76 11.275 0.37 22.45 49.788 0.46 17.20 150.356 0.90 9.84 188.201 1.06 8.59 223.677 1.12 7.77 261.289 1.22 7.17 300.000 1.42 6.79 Pin's meniscus (of header): 0.015" max. Special Tolerances: Pin diameter .005 inch. http://www.minicircuits.com/cgi-bin/spec?cat=tranfrmr&model=TMO1.5-1&pix=a03.gif&bv=4 (1 of 2) [7/10/2004 1:21:57 AM] Mini-Circuits - Specification for Transformer - TMO1.5-1 Back http://www.minicircuits.com/cgi-bin/spec?cat=tranfrmr&model=TMO1.5-1&pix=a03.gif&bv=4 (2 of 2) [7/10/2004 1:21:57 AM] i2 Technologies US, Inc. 15445 Innovation Drive San Diego, CA 92128 i2 Technologies US, Inc. HTML Pages converted to PDF Document This document contain component information from the manufacturer's website which are not available in a revision controlled document from the manufacturer. To facilitate the addition of these parts into the Electronics Database, we are converting the HTML pages related to that part, from the manufacturer's website into Adobe PDF format. The contents of this document is based on the information provided on the manufacturer's website, therefore the information may have been changed by the manufacturer since this was created. Powering the Bottom Line (R)