CTS Features: * Frequency Range: 1.8 - 48 MHz * Thru Hole or Surface Mount * Standard Frequencies Stocked by CTS Distributors * Rugged Resistance Weld Seal * Low Cost: AT-Cut Resonators * Non-Standard Frequencies or Tolerances also Available, Consult Factory The MP Series are the right choice for Microprocessor, controller, or other standard crystal applications. These hermetic packages use Resistance Weld sealing for improved aging and reliability. Surface mount lead forming is available as well as insulating sleeve, top wire, bent leads, or tape.reel packaging. Electrical Specifications: Parameter Specification Frequency Range Calibration Tolerance Temperature Stability Operating Temperature Range Operating Mode Drive Level Shunt Capacitance Aging 1.8 - 48 MHz 0.005% (50 ppm) at +25C 0.005% (50 ppm) of +25C reading -20C to +70C Fundamental (or 3rd O.T. as applicable) 100 Microwatts 7 pF, Max <10 ppm/Yr Example Part Numbers: PART FREQUENCY LOAD/ PART FREQUENCY LOAD/ PART FREQUENCY LOAD/ NUMBER (MHz) SERIES NUMBER (MHz) SERIES NUMBER (MHz) SERIES MP018S 1.843200 13pF MP060 6.000000 20pF MP122 12.288000 32pF MP020S 2.000000 20pF MP061 6.144000 20pF MP143 14.318180 SERIES MP024S 2.457600 32pF MP073 7.372800 SERIES MP147 14.745600 SERIES MP036S 3.579545 18pF MP080 8.000000 SERIES MP150 15.000000 SERIES MP037 3.686400 20pF MP080A 8.000000 20pF MP160 16.000000 SERIES MP040 4.000000 20pF MP098 9.830400 20pF MP184 18.432000 SERIES MP04A 4.000000 SERIES MP100 10.000000 SERIES MP196 19.660800 SERIES MP041 4.194304 12pF MP101 10.000000 30pF MP200 20.000000 SERIES MP042 4.915200 20pF MP107 10.738635 32pF MP221 22.118400 SERIES MP05A 5.000000 20pF MP110 11.000000 18pF MP240 24.000000 SERIES MP05B 5.000000 SERIES MP111 11.059200 SERIES MP245 24.576000 SERIES MP050 5.068800 SERIES MP120 12.000000 SERIES MP250 25.000000 SERIES 171 Covington Dr. * Bloomingdale, IL 60108-3107 Phone 800-757-6686 * Fax 630-295-6608 * E-Mail: www.ctscorp.com CRYSTALS COMMUNICATIONS COMPONENTS MP Series Crystals CRYSTALS CTS MP Series Crystals COMMUNICATIONS COMPONENTS .435 MAX [11.05 mm] "INS" "SM" With Insulator Surface Mount .435 MAX [11.05 mm] .530 MAX [13.46 mm] .096 [2.44 mm] .530 MAX [13.46 mm] .500 MIN [12.70 mm] .530 MAX [13.46 mm] .017 [.43 mm] .183 MAX [4.65 mm] .192 [4.88 mm] .192 [4.88 mm] .183 MAX [4.65 mm] .069 [1.75 mm] .735 [18.67 mm] .017 [.43 mm] .500 MIN [12.70 mm] .017 [.43 mm] .192 [4.88 mm] .068 [1.73 mm] .055 [1.40 mm] .183 MAX [4.65 mm] .435 MAX [11.05 mm] Mechanical/Environmental Specifications Package Type: Leak Test Metal cover; hermetic seal base resistance weld seal Storage Temperature: -55 to +125C <2x10-8cc-atm/sec Insulation Resistance: 500 Mohm min @ 100V Solder Reflow Capability: +260C for 10 seconds Maximum Ordering Information MP____ ____ ____ _*__ _**_ The first three digits come from "MP-Crystals --Example Part Numbers * This space is optional and may be an "A", "B", or "S" from the same Example Part Numbers ** This space is optional and may define: "TW" = Hold down Top Wire "SLV" = Insulating Sleeve "SM" = Surface Mount lead form "INS" = Insulating Spacer "1" = Tape and Reel loading for Surface Mount "2" = (Axial) Tape and Reel for Through Hole Custom frequencies specified upon request. Contact CTS for more information 171 Covington Dr. * Bloomingdale, IL 60108-3107 Phone 800-757-6686 * Fax 630-295-6608 * E-Mail: www.ctscorp.com