CTS MP Series
COMMUNICATIONS COMPONENTS Crystals
Features:
•Frequency Range: 1.8 - 48 MHz
• Thru Hole or Surface Mount
• Standard Frequencies Stocked by CTS Distributors
• Rugged Resistance Weld Seal
• Low Cost: AT-Cut Resonators
• Non-Standard Frequencies or Tolerances also Available,
Consult Factory
The MP Series are the right choice for Microprocessor, controller, or other standard crystal
applications. These hermetic packages use Resistance Weld sealing for improved aging and
reliability. Surface mount lead forming is available as well as insulating sleeve, top wire, bent
leads, or tape.reel packaging.
Electrical Specifications:
Example Part Numbers:
171 Covington Dr. • Bloomingdale, IL 60108-3107
Phone 800-757-6686 • Fax 630-295-6608 • E-Mail: www.ctscorp.com
CRYSTALS
CRYSTALS
CRYSTALS
CRYSTALS
PART
NUMBER
FREQUENCY
(MHz)
LOAD/
SERIES
PART
NUMBER
FREQUENCY
(MHz)
LOAD/
SERIES
PART
NUMBER
FREQUENCY
(MHz)
LOAD/
SERIES
MP018S 1.843200 13pF MP060 6.000000 20pF MP122 12.288000 32pF
MP020S 2.000000 20pF MP061 6.144000 20pF MP143 14.318180 SERIES
MP024S 2.457600 32pF MP073 7.372800 SERIES MP147 14.745600 SERIES
MP036S 3.579545 18pF MP080 8.000000 SERIES MP150 15.000000 SERIES
MP037 3.686400 20pF MP080A 8.000000 20pF MP160 16.000000 SERIES
MP040 4.000000 20pF MP098 9.830400 20pF MP184 18.432000 SERIES
MP04A 4.000000 SERIES MP100 10.000000 SERIES MP196 19.660800 SERIES
MP041 4.194304 12pF MP101 10.000000 30pF MP200 20.000000 SERIES
MP042 4.915200 20pF MP107 10.738635 32pF MP221 22.118400 SERIES
MP05A 5.000000 20pF MP110 11.000000 18pF MP240 24.000000 SERIES
MP05B 5.000000 SERIES MP111 11.059200 SERIES MP245 24.576000 SERIES
MP050 5.068800 SERIES MP120 12.000000 SERIES MP250 25.000000 SERIES
Parameter Specification
Frequency Range 1.8 - 48 MHz
Calibration Tolerance ±0.005% (±50 ppm) at +25°C
Temperature Stability ±0.005% (±50 ppm) of +25°C reading
Operating Temperature Range -20°C to +70°C
Operating Mode Fundamental (or 3rd O.T. as applicable)
Drive Level 100 Microwatts
Shunt Capacitance 7 pF, Max
Aging <10 ppm/Yr
Mechanical/Environmental Specifications
Package Type: Leak Test
Metal cover; hermetic seal base <2x10-8cc-atm/sec
resistance weld seal
Storage Temperature: Insulation Resistance:
-55 to +125°C 500 Mohm min @ 100V
Solder Reflow Capability:
+260°C for 10 seconds Maximum
Ordering Information
MP____ ____ ____ _*__ _**_
The first three digits come from “MP-Crystals --Example Part Numbers
* This space is optional and may be an “A”, “B”, or “S” from the same
Example Part Numbers
** This space is optional and may define:
“TW” = Hold down Top Wire
“SLV” = Insulating Sleeve
“SM” = Surface Mount lead form
“INS” = Insulating Spacer
“1” = Tape and Reel loading for Surface Mount
“2” = (Axial) Tape and Reel for Through Hole
Custom frequencies specified upon request. Contact CTS for more information
171 Covington Dr. • Bloomingdale, IL 60108-3107
Phone 800-757-6686 • Fax 630-295-6608 • E-Mail: www.ctscorp.com
CTS MP Series
COMMUNICATIONS COMPONENTS Crystals
.530 MAX
[13.46 mm]
.500 MIN
[12.70 mm]
.435 MAX
[11.05 mm]
.192
[4.88 mm]
.017
[.43 mm]
.183 MAX
[4.65 mm]
.500 MIN
[12.70 mm]
.530 MAX
[13.46 mm]
.435 MAX
[11.05 mm]
.017
[.43 mm]
.192
[4.88 mm]
.183 MAX
[4.65 mm]
.530 MAX
[13.46 mm]
.435 MAX
[11.05 mm]
.017
[.43 mm]
.192
[4.88 mm]
.183 MAX
[4.65 mm]
.096
[2.44 mm]
.069
[1.75 mm]
.068
[1.73 mm]
.055
[1.40 mm]
.735
[18.67 mm]
"INS"
With Insulator Surface Mount
"SM"
CRYSTALS
CRYSTALS
CRYSTALS
CRYSTALS
