MC74LCX08 Low-Voltage CMOS Quad 2-Input AND Gate With 5 V-Tolerant Inputs The MC74LCX08 is a high performance, quad 2-input AND gate operating from a 2.3 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. A VI specification of 5.5 V allows MC74LCX08 inputs to be safely driven from 5.0 V devices. Current drive capability is 24 mA at the outputs. http://onsemi.com MARKING DIAGRAMS 14 SOIC-14 D SUFFIX CASE 751A 14 Features * * * * * * 1 * 1 Designed for 2.3 V to 3.6 V VCC Operation 5.0 V Tolerant Inputs - Interface Capability With 5.0 V TTL Logic LVTTL Compatible 14 LVCMOS Compatible 24 mA Balanced Output Sink and Source Capability Near Zero Static Supply Current (10 mA) Substantially Reduces System Power Requirements Latchup Performance Exceeds 500 mA Human Body Model >2000 V Machine Model >200 V NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant (c) Semiconductor Components Industries, LLC, 2014 September, 2014 - Rev. 10 TSSOP-14 DT SUFFIX CASE 948G 14 * * ESD Performance: * LCX08G AWLYWW 1 1 1 LCX 08 ALYWG G A = Assembly Location L, WL = Wafer Lot Y = Year W, WW = Work Week G or G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. Publication Order Number: MC74LCX08/D MC74LCX08 VCC 14 A2 13 B2 12 O2 11 A3 B3 10 O3 9 1 A0 3 2 B0 8 4 A1 6 5 B1 11 12 B2 2 3 4 5 6 7 A0 B0 O0 A1 B1 O1 GND O1 13 A2 1 O0 O2 10 A3 8 9 B3 Figure 1. Pinout: 14-Lead (Top View) O3 Figure 2. Logic Diagram PIN NAMES TRUTH TABLE Pins Function An, Bn Data Inputs On Outputs Inputs Outputs An Bn On L L L L H L H L L H H H H = High Voltage Level L = Low Voltage Level For ICC reasons, DO NOT FLOAT Inputs MAXIMUM RATINGS Symbol Parameter VCC DC Supply Voltage VI DC Input Voltage VO DC Output Voltage IIK Value Condition Unit -0.5 to +7.0 V -0.5 VI +7.0 V -0.5 VO VCC + 0.5 Output in HIGH or LOW State (Note 1) V DC Input Diode Current -50 VI < GND mA IOK DC Output Diode Current -50 VO < GND mA +50 VO > VCC mA IO DC Output Source/Sink Current 50 mA ICC DC Supply Current Per Supply Pin 100 mA IGND DC Ground Current Per Ground Pin 100 mA TSTG Storage Temperature Range -65 to +150 C MSL Moisture Sensitivity Level 1 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. IO absolute maximum rating must be observed. http://onsemi.com 2 MC74LCX08 RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Type Max Unit 2.0 1.5 2.5, 3.3 2.5, 3.3 3.6 3.6 V 0 5.5 V 0 VCC V VCC = 3.0 V - 3.6 V VCC = 2.7 V - 3.0 V VCC = 2.3 V - 2.7 V -24 -12 -8 mA VCC = 3.0 V - 3.6 V VCC = 2.7 V - 3.0 V VCC = 2.3 V - 2.7 V +24 +12 +8 mA -40 +85 C 0 10 ns/V VCC Supply Voltage Operating Data Retention Only VI Input Voltage VO Output Voltage (HIGH or LOW State) (3-State) IOH HIGH Level Output Current IOL LOW Level Output Current TA Operating Free-Air Temperature Dt/DV Input Transition Rise or Fall Rate, VIN from 0.8 V to 2.0 V, VCC = 3.0 V Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. DC ELECTRICAL CHARACTERISTICS TA = -40C to +85C Symbol Characteristic VIH HIGH Level Input Voltage (Note 2) VIL LOW Level Input Voltage (Note 2) VOH VOL HIGH Level Output Voltage LOW Level Output Voltage Condition Min 2.3 V VCC 2.7 V 1.7 2.7 V VCC 3.6 V 2.0 Max V 2.3 V VCC 2.7 V 0.7 2.7 V VCC 3.6 V 0.8 2.3 V VCC 3.6 V; IOH = -100 mA VCC - 0.2 VCC = 2.3 V; IOH = -8 mA 1.8 VCC = 2.7 V; IOH = -12 mA 2.2 VCC = 3.0 V; IOH = -18 mA 2.4 VCC = 3.0 V; IOH = -24 mA 2.2 Unit V V 2.3 V VCC 3.6 V; IOL = 100 mA 0.2 VCC = 2.3 V; IOL = 8 mA 0.6 VCC = 2.7 V; IOL = 12 mA 0.4 VCC = 3.0 V; IOL = 16 mA 0.4 V VCC = 3.0 V; IOL = 24 mA 0.55 VCC = 0, VIN = 5.5 V or VOUT = 5.5 V 10 mA Input Leakage Current VCC = 3.6 V, VIN = 5.5 V or GND 5 mA ICC Quiescent Supply Current VCC = 3.6 V, VIN = 5.5 V or GND 10 mA DICC Increase in ICC per Input 2.3 VCC 3.6 V; VIH = VCC - 0.6 V 500 mA IOFF Power Off Leakage Current IIN Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. These values of VI are used to test DC electrical characteristics only. http://onsemi.com 3 MC74LCX08 AC CHARACTERISTICS (tR = tF = 2.5 ns; RL = 500 W) Limits TA = -40C to +85C Symbol VCC = 3.3 V 0.3 V VCC = 2.7 V VCC = 2.5 V 0.2 V CL = 50 pF CL = 50 pF CL = 30 pF Parameter Waveform Min Max Min Max Min Max Unit tPLH Propagation Delay Time 1 1.5 5.5 1.5 6.2 1.5 6.6 ns tPHL Input to Output 1.5 5.5 1.5 6.2 1.5 6.6 tOSHL Output-to-Output Skew 1.0 tOSLH (Note 3) 1.0 ns 3. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH); parameter guaranteed by design. DYNAMIC SWITCHING CHARACTERISTICS TA = +25C Symbol VOLP VOLV Characteristic Condition Min Typ Max Unit Dynamic LOW Peak Voltage VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V 0.8 V (Note 4) VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V 0.6 V Dynamic LOW Valley Voltage VCC = 3.3 V, CL = 50 pF, VIH = 3.3 V, VIL = 0 V -0.8 V (Note 4) VCC = 2.5 V, CL = 30 pF, VIH = 2.5 V, VIL = 0 V -0.6 V 4. Number of outputs defined as "n". Measured with "n-1" outputs switching from HIGH-to-LOW or LOW-to-HIGH. The remaining output is measured in the LOW state. CAPACITIVE CHARACTERISTICS Symbol Condition Typical Unit CIN Input Capacitance Parameter VCC = 3.3 V, VI = 0 V or VCC 7 pF COUT Output Capacitance VCC = 3.3 V, VI = 0 V or VCC 8 pF CPD Power Dissipation Capacitance 10 MHz, VCC = 3.3 V, VI = 0 V or VCC 25 pF ORDERING INFORMATION Package Shipping MC74LCX08DG SOIC-14 (Pb-Free) 55 Units / Rail MC74LCX08DR2G SOIC-14 (Pb-Free) 2500 Tape & Reel MC74LCX08DTG TSSOP-14 (Pb-Free) 96 Units / Rail MC74LCX08DTR2G TSSOP-14 (Pb-Free) 2500 Tape & Reel NLVLCX08DTR2G* TSSOP-14 (Pb-Free) 2500 Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NLV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable. http://onsemi.com 4 MC74LCX08 Vcc Vmi An, Bn Vmi 0V tPHL tPLH VOH Vmo On Vmo VOL WAVEFORM 1 - PROPAGATION DELAYS tR = tF = 2.5 ns, 10% to 90%; f = 1 MHz; tW = 500 ns Vcc Symbol 3.3 V + 0.3 V 2.7 V 2.5 V + 0.2 V Vmi 1.5 V 1.5 V Vcc/2 Vmo 1.5 V 1.5 V Vcc/2 Figure 3. AC Waveforms VCC PULSE GENERATOR DUT RT CL = CL = RL = RT = CL RL 50 pF at VCC = 3.3 + 0.3 V or equivalent (includes jig and probe capacitance) 30 pF at VCC = 2.5 + 0.2 V or equivalent (includes jig and probe capacitance) R1 = 500 W or equivalent ZOUT of pulse generator (typically 50 W) Figure 4. Test Circuit http://onsemi.com 5 MC74LCX08 PACKAGE DIMENSIONS TSSOP-14 CASE 948G ISSUE B 14X K REF 0.10 (0.004) 0.15 (0.006) T U M T U V S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE -W-. S S N 2X 14 L/2 0.25 (0.010) 8 M B -U- L PIN 1 IDENT. F 7 1 0.15 (0.006) T U N S DETAIL E K A -V- EEE CCC CCC EEE K1 J J1 DIM A B C D F G H J J1 K K1 L M SECTION N-N -W- C 0.10 (0.004) -T- SEATING PLANE D H G DETAIL E SOLDERING FOOTPRINT* 7.06 1 0.65 PITCH 14X 0.36 14X 1.26 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 6 MILLIMETERS INCHES MIN MAX MIN MAX 4.90 5.10 0.193 0.200 4.30 4.50 0.169 0.177 --- 1.20 --- 0.047 0.05 0.15 0.002 0.006 0.50 0.75 0.020 0.030 0.65 BSC 0.026 BSC 0.50 0.60 0.020 0.024 0.09 0.20 0.004 0.008 0.09 0.16 0.004 0.006 0.19 0.30 0.007 0.012 0.19 0.25 0.007 0.010 6.40 BSC 0.252 BSC 0_ 8_ 0_ 8_ MC74LCX08 PACKAGE DIMENSIONS SOIC-14 NB CASE 751A-03 ISSUE K D A B 14 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE PROTRUSION SHALL BE 0.13 TOTAL IN EXCESS OF AT MAXIMUM MATERIAL CONDITION. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD PROTRUSIONS. 5. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 8 A3 E H L 1 0.25 M DETAIL A 7 B 13X M b 0.25 M C A S B S e DETAIL A h A X 45 _ M A1 C SEATING PLANE DIM A A1 A3 b D E e H h L M MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.19 0.25 0.35 0.49 8.55 8.75 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ INCHES MIN MAX 0.054 0.068 0.004 0.010 0.008 0.010 0.014 0.019 0.337 0.344 0.150 0.157 0.050 BSC 0.228 0.244 0.010 0.019 0.016 0.049 0_ 7_ SOLDERING FOOTPRINT* 6.50 14X 1.18 1 1.27 PITCH 14X 0.58 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MC74LCX08/D