857271 456 MHz SAW Filter Applications For WCDMA/LTE applications SMP-28, 7.01 x 5.51 x 1.70 mm Product Features Functional Block Diagram Usable bandwidth of 39.6 MHz Low loss High attenuation Low EVM Balanced operation Ceramic Surface Mount Package (SMP) Small Size: 7.01 x 5.51 x 1.70 mm Hermetically Sealed RoHS compliant, Pb-free Pb Gnd Gnd Gnd 9 7 Input + 10 6 Output - Gnd 11 5 Gnd Input - 12 4 Output + 1 2 3 Gnd Gnd Gnd bb b Top View General Description P The 857271 is a high-performance bvIF SAW Pin Configuration - Single Ended filter with a center frequency of 456 MHz and a 1.4 dB bandwidth of 39.6 MHz. P excellentb attenuation, 8 It features low loss with and is designed to be used with a balanced input and output. The small size of this surface mounted filter makes it an economical choice for demanding applications such as WCDMA/LTE or other similar high data rate communications standards. Pin No. Label 10 12 4 6 1, 2, 3, 5, 7, 8, 9, 11 Input + Input - Output + Output - Ground This device is RoHS compliant and Pb-free. Ordering Information Part No. Description 857271 857271-EVB Packaged Part Evaluation board Standard T/R size = 3,000 units/reel Data Sheet: Rev. A 14-09-22 (c) 2014 TriQuint - 1 of 6 - Disclaimer: Subject to change without notice www.triquint.com 857271 456 MHz SAW Filter Absolute Maximum Ratings Parameter Rating -40 to +85 C Storage Temperature Input power, in band, CW, 64.5 hours at 50 C (1) Input power, out of band, CW, 64 hours at 50 C +19 dBm (1) Notes: 1. Operation of this device outside the parameter ranges given may cause permanent damage +25 dBm Electrical Specifications (1) (3) Test conditions unless otherwise noted: Parameter (4) Absolute Group Delay Group Delay Variation EVM IIP3 (4) (5) (6) Attenuation Temperature Range -33 to +105 C Min Typ at 25oC Max Units - - - 11 1.4 1.0 500 100 MHz dB dB p-p - - 456 8.5 1.0 0.7 365 30 - 1.9 3.0 % 37 45 39 48 45 45 30 23 15 10 5 5 10 15 23 30 45 55 55 55 52 58 60 50 49 47 46 31 47 55 53 53 52 58 62 63 - - - - - - - - - - - - - - - - - - 1 - 500 s 35 38 - dB 436.2 - 475.8 MHz 10 - - 14 200 50 - - - dB Conditions Center Frequency Insertion Loss Amplitude Variation (2) (7) Time Sidelobe Response Attentuatuion Input / Output Return Loss Source Impedance Balanced Load Impedance Balanced 456 MHz 436.2 - 475.8 MHz 441.0 - 471.0 MHz 456 MHz 436.2 - 475.8 MHz Over any 3.84 MHz span within 436.2 - 475.8 MHz Tone spacing 0.8 to 5 MHz Tone spacing 5 to 30 MHz 10 - 351 MHz 351 - 392 MHz 392 - 410 MHz 410 - 422 MHz 422 - 423 MHz 423 - 424 MHz 424 - 425.5 MHz 486.5 - 488 MHz 488 - 489 MHz 489 - 490 MHz 490 - 491 MHz 491 - 520 MHz 520 - 561 MHz 561 - 597 MHz 597 - 638 MHz 638 - 1000 MHz - nsec nsec dBm dB Notes: 1. All specifications are based on the test circuit shown on page 3. 2. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the design to account for the variations due to manufacturing tolerances. 4. Variation is defined as the total peak to peak variation over the defined frequency range. 5. Measurement made with a RRC filtered QPSK modulated signal. 6. Measurement made only during engineering development. 7. Measurement made relative to insertion loss at Center Frequency, F0. Data Sheet: Rev. A 14-09-22 (c) 2014 TriQuint - 2 of 6 - Disclaimer: Subject to change without notice www.triquint.com 857271 456 MHz SAW Filter 960686 Evaluation Board 960686 L3 L1 C1 C2 SAWTEK 857271 JJJYHHM L2 L4 Notes: 1. Top, middle & bottom layers: 1 oz copper 2. Substrates: FR4 dielectric , .031" thick 3. Finish plating: Nickel: 3-8 m 4. Hole plating: Copper min .0008 m thick 5.6 nH 10 nH 10 6 6.8 pF 15 pF 200 10 nH 12 1,2,3, 5,7,8,9,11 50 4 5.6 nH Bill of Material - 960686 Reference Des. Value Description Manuf. Part Number L1 L2 L3 L4 10 nH 10 nH 5.6 nH 5.6 nH Coil Wire-wound, 0603, 5 % Coil Wire-wound, 0603, 5 % Coil Wire-wound, 0603, 5 % Coil Wire-wound, 0603, 5 % Murata Murata Murata Murata LQW18AN10NJ00 LQW18AN10NJ00 LQW18AN5n6NJ00 LQW18AN5n6NJ00 C1 C2 SMA PCB 6.8 pF 15 pF N/A N/A Chip Ceramic, 0603 Chip Ceramic, 0603 SMA connector 3-layer Data Sheet: Rev. A 14-09-22 (c) 2014 TriQuint Murata Murata Johnson Components Multiple - 3 of 6 - GRM1885C1H6R8DZ01 GRM1885C1H150JA01 142-0701-801 960686 Disclaimer: Subject to change without notice www.triquint.com 857271 456 MHz SAW Filter Performance Plots - PCB 960686 Test conditions unless otherwise noted: Temp.= +25 C Frequency Response 0 Passband Response -8 -20 -9 -40 d B d B -60 -10 -11 -80 -12 416.4 -100 356 406 456 506 556 436.2 Wideband Response 0 475.8 495.6 475.8 495.6 Group Delay Response 100 -20 d B 456 Frequency (MHz) Frequency (MHz) 50 n s e c -40 -60 0 -50 -80 -100 10 260 510 760 1010 -100 416.4 436.2 Frequency (MHz) Input Smith Chart Output Smith Chart 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 0 -1 -0 .5 Data Sheet: Rev. A 14-09-22 (c) 2014 TriQuint 456 Frequency (MHz) 0 0 0.5 -1 1 -0 .5 0 -0 .2 -0 .2 -0 .4 -0 .4 -0 .6 -0 .6 -0 .8 -0 .8 -1 -1 - 4 of 6 - 0.5 1 Disclaimer: Subject to change without notice www.triquint.com 857271 456 MHz SAW Filter Package Information, Marking and Dimensions Package Style: SMP- 28 Dimensions: 7.01 x 5.51 x 1.70 mm TriQuint 857271 JJJYHHM ID dot Date code Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0 m, over a 2 - 6 m Ni plating All dimensions shown are typical in millimeters All tolerances are 0.15 mm except overall length and width 0.10 mm 0.76 1.63 NOM. 1.78 MAX. 7.01 1.27 1.70 1.27 The date code consists of day of the current year (Julian, 3 digits), Y = last digit of the year, and M = manufacturing site code Notes: 1. All dimensions shown are typical in millimeters 2. An asterisk (*) in front of the marking code indicates prototype. 5.51 0.79 1.14 PCB Mounting Pattern 1.34 .28 .99 1.34 .28 5.71 Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. .99 7.21 Tape and Reel information Standard T/R size = 3000 units / reel . All dimensions are in millimeters 16.8 2.7 O330 Pad 1 ID dot 4.0 0.3 2.0 O1.5 A 1.75 7.5 O102 Direction of travel O20.2 O13.0 16.0 7.3 2.0 2.2 5.8 8.0 O1.5 A Section A-A Data Sheet: Rev. A 14-09-22 (c) 2014 TriQuint - 5 of 6 - Disclaimer: Subject to change without notice www.triquint.com 857271 456 MHz SAW Filter Product Compliance Information ESD Sensitivity Ratings Solderability Compatible with both lead-free (260 C maximum reflow temperature) and tin/lead (245 C maximum reflow temperature) soldering processes. Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: Value: Test: Standard: Class 0B Passes 125 V Human Body Model (HBM) JEDEC Standard JESD22-A114 ESD Rating: Value: Test: Standard: Class TBD Passes TBDV Charged Device Model (CDM) JEDEC Standard JESD22-C101 RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Lead Free Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Not applicable. Hermetic package. Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev. A 14-09-22 (c) 2014 TriQuint - 6 of 6 - Disclaimer: Subject to change without notice www.triquint.com