3
3M™Laminating Adhesive 360
Electronics, transportation, appliances, medical devices, and more
Strong performance with quick, sure stick
across a broad range of HSE and LSE substrates
1
2
More
strength
with less
adhesive
Peel Strength (oz/in) Polypropylene
160
140
120
100
80
60
40
20
0
Don’t let size deceive you. With a thin 2-mil or 5-mil transfer tape or
thin 2-mil or 4-mil double-coated tape using 3M™Laminating
Adhesive 360, shear and peel strengths are equal or greater than
other thicker tapes. And for the many OEMs designing thinner products
using lighter weight materials, there’s even more:
• Quick stick for fast, secure assembly with a range of HSE and LSE
materials including glass, ABS, and hard-to-bond PP, HDPE, LDPE,
Nylon and powder coated or UV painted surfaces
• Resistance up to 350°F (177°C), and to different solvents,
and harsh environments
• Low odor
Converter friendly
for high speed productivity
Little or no oozing helps solve three
time-wasting production problems:
• Adhesive “picking” during unwind
• Adhesive residue on cutting blades
• Adhesive sticking to back of liner and/or
the die-cut part surface
3M™Laminating Adhesive 360 – bond,
seal, and resist with 2-5 mils of real power
Double Coated Tapes
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Thin for
low
profile
bond
lines
using
less
adhesive
Conforms to texture
3M 9629PC
4 mil
Comp. A
8 mil
Comp. B
6.2 mil
Comp. C
6 mil
Comp. D
4 mil
Adhesive Transfer Tapes
Peel Strength (oz/in) Polypropylene
160
140
120
100
80
60
40
20
03M 9627
5 mil
3M 9626
2 mil
Comp. A
5 mil
Comp. B
5 mil
Comp. C
4 mil
Comp. D
4 mil
3
4
Go to thin bondlines...quick, easy attaching of hard-to-bond
Application ideas:
• Interior decorative trim
attachment
• Die-cut parts for noise
damping
• Plastic housing and
component assembly
Relevant characteristics:
• Quick bonding of HSE and
LSE materials from console
to trunk and under the hood
• High shear/peel strength for
reduced adhesive ooze,
slippage, and lifting
• Thin for smooth appearance of
instrument panel graphics
Application ideas:
• Decorative trim attachment
• Die-cut parts including LCD
windows
• Nameplates and rating plates
for difficult-to-bond surfaces
Relevant characteristics:
• Quick bonding of HSE and
LSE materials including
powder coated paints
• High shear/peel strength for
reduced adhesive ooze,
slippage, and lifting
• Resists high temperatures up
to 350°F (177°C) and typical
household cleaners
• Thin for smooth appearance of
instrument panel graphics
Application ideas:
• Lens bonding
• Gasket attachment
• Plastic housing and
component assembly
• Die-cut parts including LCD
windows
• Decorative trim attachment
Relevant characteristics:
• Quick bonding of plastic
components and specialty
texture painted surfaces
• High shear/peel strength for
reduced adhesive ooze,
slippage, and lifting
• Resists high temperatures up
to 350°F (177°C)
associated with transformers
• Thin for smooth appearance of
thin plastic decorative trim
Application ideas:
• Nameplates and rating plates
for difficult-to-bond surfaces
• Lens bonding
• Gasket attachment
• Plastic housing and
component assembly
• Die-cut parts including LCD
windows
Relevant characteristics:
• Quick bonding of HSE and
LSE materials
• High shear/peel strength for
long-term durability
• Resists high temperatures up
to 350°F (177°C)
• Thin for smooth appearance of
control panels
Appliance
Transportation
5
6
Medical Devices
Electronics
surfaces...strength to take the stresses in many applications
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application.
Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a
particular purpose and suitable for user’s method of application. Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the
applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M
MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M
product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of
Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential,
regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
3
Converter Markets
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-223-7427
www.3M.com/converter
3M is a trademark of 3M Company.
Printed in U.S.A
© 3M 2009
70-0713-4540-2
Adhesive Family Features
350 • Best in class for high temperature resistance • Best for challenging applications
350°F (177°C) and shear strength
• Excellent solvent resistance and for
harsh environments
360 • More strength with less adhesive • Low odor
• Quick stick properties to many LSE substrates • Excellent convertability (die-cut)
• Lowest ooze
300LSE • Best in class for oily substrates • Good chemical and humidity resistance
• Thicker "Go To" tapes for LSE substrates
300MP • Multi-purpose use for many applications • Economical attachments of graphics
• Bonds very well to foam, fabrics and
many plastics
Product Selection
Note: This technical information and data should be considered representative or typical only and should not be used for specification purposes.
Adhesive Product Format Color Tape Carrier Liner Liner Master Size
Family Thickness* Thickness
(mils)
Quick 9626 ATT Clear 2 mil - Glassine 3.2 54" x 180 yds
Stick
Acrylic 9627** ATT Clear 5 mil - Glassine 3.2 54" x 180 yds
360
9628B** DC Black 2 mil PET Glassine 3.2 54" x 180 yds
9628FL** DC Clear 2 mil PET PET film 2 54" x 180 yds
9629PC DC Clear 4 mil PET PCK 4.2 54"" x 180 yds
9629FL DC Clear 4 mil PET PET film 2 54" x 180 yds
9629B** DC Black 4 mil PET Glassine 3.2 54" x 180 yds
*Others avaliable on request.
** Available in October 2009
