MBR1030CT thru MBR1045CT Wide Temperature Range and High Tjm Schottky Barrier Rectifiers A C A Dimensions TO-220AB A C A C(TAB) A B C D E F G H J K M N Q R A=Anode, C=Cathode, TAB=Cathode MBR1030CT MBR1035CT MBR1040CT MBR1045CT VRRM V 30 35 40 45 VRMS V 21 24.5 28 31.5 Symbol VDC V 30 35 40 45 Characteristics 10 A 125 A 10000 V/us IF=5A @TJ=25oC IF=5A @TJ=125oC IF=10A @TJ=125oC 0.57 0.70 0.84 V @TJ=25oC @TJ=125oC 0.1 15 mA @TC=105oC IFSM Peak Forward Surge Current 8.3ms Single Half-Sine-Wave Superimposed On Rated Load (JEDEC METHOD) Voltage Rate Of Change (Rated VR) VF IR Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Thermal Resistance (Note 2) 3.0 CJ Typical Junction Capacitance Per Element (Note 3) 170 TJ Operating Temperature Range ROJC TSTG Milimeter Min. Max. 12.70 13.97 14.73 16.00 9.91 10.66 3.54 4.08 5.85 6.85 2.54 3.18 1.15 1.65 2.79 5.84 0.64 1.01 2.54 BSC 4.32 4.82 1.14 1.39 0.35 0.56 2.29 2.79 Unit Maximum Average Forward Rectified Current Maximum Forward Voltage (Note 1) Inches Min. Max. 0.500 0.550 0.580 0.630 0.390 0.420 0.139 0.161 0.230 0.270 0.100 0.125 0.045 0.065 0.110 0.230 0.025 0.040 0.100 BSC 0.170 0.190 0.045 0.055 0.014 0.022 0.090 0.110 Maximum Ratings I(AV) dv/dt Dim. Storage Temperature Range o C/W pF -55 to +150 o -55 to +175 o NOTES: 1. 300us Pulse Width, Duty Cycle 2%. 2. Thermal Resistance Junction To Case. 3. Measured At 1.0MHz And Applied Reverse Voltage Of 4.0V DC. FEATURES MECHANICAL DATA * Metal of silicon rectifier, majority carrier conducton * Guard ring for transient protection * Low power loss, high efficiency * High current capability, low VF * High surge capacity * For use in low voltage, high frequency inverters, free whelling, and polarity protection applications * Case: TO-220AB molded plastic * Polarity: As marked on the body * Weight: 0.08 ounces, 2.24 grams * Mounting position: Any C C MBR1030CT thru MBR1045CT Wide Temperature Range and High Tjm Schottky Barrier Rectifiers 12 8 4 0 RESISTIVE OR INDUCTIVE LOAD 25 50 75 100 125 150 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES FIG.1 - FORWARD CURRENT DERATING CURVE 16 175 150 125 100 75 50 25 8.3ms Single Half-Sine-Wave (JEDEC METHOD) 0 1 2 5 CASE TEMPERATURE , C FIG.3 - TYPICAL REVERSE CHARACTERISTICS 50 100 FIG.4 - TYPICAL FORWARD CHARACTERISTICS 100 INSTANTANEOUS FORWARD CURRENT ,(A) 100 10 TJ = 125 C 1.0 0.1 0.01 TJ = 25 C 0.001 10 1.0 TJ = 25 C PULSE WIDTH 300us 2% Duty cycle 0.1 0 20 40 60 80 100 140 120 0.1 0.2 0.3 0.4 FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 MBR1030CT ~ MBR1045CT 100 MBR1050CT ~ MBR1060CT TJ = 25 C, f= 1MHz 10 0.1 1 0.5 0.6 0.7 0.8 0.9 INSTANTANEOUS FORWARD VOLTAGE , VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE ,(%) CAPACITANCE , (pF) INSTANTANEOUS REVERSE CURRENT ,(mA) 20 10 NUMBER OF CYCLES AT 60Hz 4 10 REVERSE VOLTAGE , VOLTS 100 1.0