MAFL-011082 Reflection-less Low Pass Filter 5 - 684 MHz Rev. V2 Features Functional Schematic 75 Surface Mount 18 mm device Low Insertion Loss to 684 MHz Matched to 1218 MHz RoHS Compliant and Pb free Description MAFL-011082 is a reflection less low pass filter with a pass band from 5 - 684 MHz with low insertion loss in the pass band and excellent matched return loss to 1218 MHz. Pin Configuration3,4 Ordering Information1,2 Package Pin # Function MAFL-011082 300 piece reel 1, 2, 4, 5, 6, 7, 8, 9, 11, 12, 13, 14, 15, 16 Ground MAFL-011082-TB Sample Board 3 Input Port 10 Output Port Part Number 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. MACOM recommends connecting unused package pins to ground. 4. The exposed pad centered on the package bottom must be connected to RF, DC and thermal ground. Electrical Specifications: TA = 25C, Z0 = 75 Parameter Test Conditions Frequency (MHz) Units Min Typical Max Insertion Loss 5 - 684 dB -- 0.75 1.0 Filter Rejection 1000 1218 dB 22 35 24 45 -- Filter Input Port Return Loss 5 - 1218 dB 18 22 -- * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0019302 MAFL-011082 Reflection-less Low Pass Filter 5 - 684 MHz Absolute Maximum Ratings5,6 Parameter Value RF Power 250 mW DC Current 30 mA Operating & Storage Temperature -40C to +85C Rev. V2 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. MACOM does not recommend sustained operation near these survivability limits. Typical Performance Curves Low Pass Filter Input Port Return Loss 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0019302 MAFL-011082 Reflection-less Low Pass Filter 5 - 684 MHz Recommended PCB Configuration Rev. V2 Filter Outline Drawing Dimensions in mm. Tolerance: .x 0.1, .xx 0.05 3 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0019302 MAFL-011082 Reflection-less Low Pass Filter 5 - 684 MHz Rev. V2 Tape & Reel Information Orientation Pin #1 Identifier Dimensions Parameter Units Value Qty per reel -- 300 Reel Size mm 330 Tape Width mm 32.00 Pitch mm 24.00 Ao mm 18.5 Bo mm 18.5 Ko mm 7.0 Orientation -- F30 Reference Application Note ANI-019 for orientation 4 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0019302 MAFL-011082 Reflection-less Low Pass Filter 5 - 684 MHz Rev. V2 MACOM Technology Solutions Inc. All rights reserved. Information in this document is provided in connection with MACOM Technology Solutions Inc ("MACOM") products. These materials are provided by MACOM as a service to its customers and may be used for informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM assumes no responsibility for errors or omissions in these materials. MACOM may make changes to specifications and product descriptions at any time, without notice. MACOM makes no commitment to update the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS, WHICH MAY RESULT FROM THE USE OF THESE MATERIALS. MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM customers using or selling MACOM products for use in such applications do so at their own risk and agree to fully indemnify MACOM for any damages resulting from such improper use or sale. 5 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support DC-0019302