2014-03-10 PointLED Datasheet Version 2.1 LB P4SG reverse mount With a diameter of just 2 mm, the PointLED is one of the smallest packages in its class and achieves high luminous efficacies. Due to its round and flat package, measuring only 0.775 mm high, it is ideal for application where space is a sensitive issue. Mit nur 2 mm Durchmesser gehort die PointLED zu den kleinsten LED auf dem Markt bei hohen Effizienzen. Aufgrund ihres runden und flachen Gehauses mit nur 0,775 mm Bauhohe ist sie ideal fur Applikationen mit begrenztem Raum. Features: Besondere Merkmale: * Package: white SMT package, colorless clear silicone resin * Technology: ThinGaN * Viewing angle at 50 % IV: 120 (horizontal); 120 (vertical) * Color: blue (470 nm) * Gehausetyp: weies SMT Gehause, farbloser klarer Silikon-Verguss * Technologie: ThinGaN * Abstrahlwinkel bei 50 % IV: 120 (horizontal); 120 (vertical) * Farbe: blau (470 nm) Applications Anwendungen * Backlighting * Signal and Symbol Luminary 2014-03-10 top mount * Hinterleuchtung * Signal- und Symbolleuchten 1 Version 2.1 LB P4SG Ordering Information Bestellinformation Type: Mounting methode Luminous Intensity 1) page 21 Ordering Code Typ: Montierbarkeit Lichtstarke Bestellnummer 1) Seite 21 IF = 20 mA IV [mcd] LB P4SG-S2U1-35-1 reverse mount 224 ... 560 Q65110A8252 LB P4SG-S2U1-35-SF top mount 224 ... 560 Q65110A8253 Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LB P4SG-S2U1-35-SF means that only one group S2, T1, T2, U1 will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one packing unit. E. g. LB P4SG-S2U1-35-SF means that only one wavelength group 3,4,5 will be shippable. LB P4SG-S2U1-35-SF means that the device will be shipped within the specified limits as stated on page 5. In order to ensure availability, single wavelength groups will not be orderable (see page 5). In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any one reel. E. g. LB P4SG-S2U1-35-SF means that only one forward voltage group 4, 5, 6 will be shippable. In order to ensure availability, single wavelength groups will not be orderable (see page 5for explanation). Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LB P4SG-S2U1-35-SF bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen S2, T1, T2, U1 enhalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Wellenlangengruppe geliefert. Z. B. LB P4SG-S2U1-35-SF bedeutet, dass in einer Verpackungseinheit nur eine der Wellenlangengruppen 3,4,5 enthalten ist (siehe Seite 5). LB P4SG-S2U1-35-SF bedeutet, dass das Bauteil innerhalb der spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Durchlassspannungsgruppe geliefert. Z. B. LB P4SG-S2U1-35-SF bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. Auf einem Gurt ist nur eine der Durchlassspannungsgruppen 4, 5, 6 enthalten (siehe Seite 5fur nahere Informationen). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. 2014-03-10 2 Version 2.1 LB P4SG Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 100 C Storage temperature range Lagertemperatur Tstg -40 ... 100 C Junction temperature Sperrschichttemperatur Tj 125 C Forward current Durchlassstrom (TS = 25 C) IF 5 ... 20 mA Surge current Stostrom (t <= 10 s; D = 0.005; T S = 25 C) IFM 200 mA Reverse voltage 2) page 21 Sperrspannung 2) Seite 21 (TS = 25 C) VR 5 V ESD sensitive device kV ESD withstand voltage VESD ESD Festigkeit (acc. ANSI/ESDA/JEDEC JS-001 - HBM, Class 0) 2014-03-10 3 Version 2.1 LB P4SG Characteristics (TS = 25 C; IF = 20 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Wavelength at peak emission Wellenlange d. emittierten Lichtes (typ.) peak 465 nm Dominant Wavelength 3) page 21 Dominantwellenlange 3) Seite 21 (min.) (typ.) (max.) dom dom dom 464 470 476 nm nm nm Spectral bandwidth at 50% Irel max Spektrale Bandbreite b. 50% Irel max (typ.) 25 nm Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 120 (horizontal) 120 (vertical) Forward voltage 4) page 21 Durchlassspannung 4) Seite 21 (min.) (typ.) (max.) VF VF VF 2.90 3.20 3.70 V V V Reverse current Sperrstrom (VR = 5 V) (typ.) (max.) IR IR 0.01 10 A A Temperature coefficient of peak Temperaturkoeffizient von peak (-10C T 100C) (typ.) TCpeak 0.04 nm/K Temperature coefficient of dom Temperaturkoeffizient von dom (-10C T 100C) (typ.) TCdom 0.02 nm/K Temperature coefficient of VF Temperaturkoeffizient von VF (-10C T 100C) (typ.) TCV -4.00 mV/K Real thermal resistance junction / ambient (max.) Rth JA real 400 K/W (max.) Rth JS real 240 K/W 5) page 21 , 6) page 21 Realer Warmewiderstand Sperrschicht / Umgebung 5) Seite 21 , 6) Seite 21 Real thermal resistance junction / solder point 6) page 21 Realer Warmewiderstand Sperrschicht / Lotpad 6) Seite 21 Note: Individual forward voltage groups see next page Anm.: Durchlassspannungsgruppen siehe nachste Seite 2014-03-10 4 Version 2.1 LB P4SG Brightness Groups Helligkeitsgruppen Luminous Intensity Luminous Flux 7) page 21 Lichtstarke 1) Seite 21 Lichtstrom 7) Seite 21 Group Luminous Intensity Gruppe Lichtstarke (min.) Iv [mcd] (max.) Iv [mcd] (typ.) V [mlm] S2 224 280 760 T1 280 355 950 T2 355 450 1210 U1 450 560 1520 1) page 21 1) page 21 1) Seite 21 Note: The standard shipping format for serial types includes a grouping of only a few brightness groups. Individual brightness groups cannot be ordered. Anm.: Die Standardlieferform von Serientypen beinhaltet eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen besteht. Einzelne Helligkeitsgruppen sind nicht bestellbar. Forward Voltage Groups 4) page 21 Durchlassspannungsgruppen 4) Seite 21 Group Gruppe (min.) VF [V] (max.) VF [V] 4 2.90 3.20 5 3.20 3.50 6 3.50 3.70 Dominant Wavelength Groups 3) page 21 Dominant Wellenlangengruppen 3) Seite 21 Group blue Gruppe (min.) dom [nm] (max.) dom [nm] 3 464 468 4 468 472 5 472 476 Note: No packing unit / tape ever contains more than one color group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Farbe enthalten. 2014-03-10 5 Version 2.1 LB P4SG Group Name on Label Gruppenbezeichnung auf Etikett Example: S2-3-4 Beispiel: S2-3-4 Brightness Helligkeit Wavelength Wellenlange Forward Voltage Durchlassspannung S2 3 4 Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2014-03-10 6 Version 2.1 LB P4SG Relative Spectral Emission - V() = Standard eye response curve 7) page 21 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 7) Seite 21 Irel = f (); TS = 25 C; IF = 20 mA OHL00192 100 I rel % 80 V 60 blue true green 40 20 0 400 450 500 550 650 600 nm 700 Radiation Characteristics 7) page 21 Abstrahlcharakteristik 7) Seite 21 Irel = f (); TS = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2014-03-10 0.8 0.6 0.4 0 20 7 40 60 80 100 120 Version 2.1 LB P4SG Relative Luminous Intensity 7) page 21 , 8) page 21 Relative Lichtstarke 7) Seite 21 , 8) Seite 21 IV/IV(20 mA) = f(IF); TS = 25 C Forward Current 7) page 21 Durchlassstrom 7) Seite 21 IF = f (VF); TS = 25 C OHL02359 10 2 IF I V (20 mA) 5 10 1 10 0 5 5 10 0 2.5 3 3.5 4 10 -1 0 10 4.5 V 5 Dominant Wavelength 7) page 21 Dominante Wellenlange 7) Seite 21 dom = f(IF); TS = 25 C OHL02481 dom 476 474 472 470 468 466 464 0 10 20 30 40 50 60 70 80 mA 100 IF 2014-03-10 5 10 1 mA 10 2 IF VF 478 nm OHL02386 10 1 IV mA 8 Version 2.1 LB P4SG Relative Luminous Intensity 7) page 21 Relative Lichtstarke 7) Seite 21 IV/IV(25)C = f(Tj); IF = 20 mA Relative Forward Voltage 7) page 21 Relative Vorwartsspannung 7) Seite 21 VF = VF - VF(25 C) = f(Tj); IF = 20 mA VF OHL02912 0.4 V Iv OHL-2013-01-Iv 1,4 Iv(25C) 0.3 1,2 0.2 1,0 0.1 0,8 0 0,6 -0.1 0,4 true green blue 0,2 -0.2 -0.3 -60 -40 -20 0 20 40 60 0,0 -40 C 100 2014-03-10 -20 0 20 40 60 80 100 Tj [C] Tj 9 Version 2.1 LB P4SG Max. Permissible Forward Current Max. zulassiger Durchlassstrom IF = f (T) IF OHL02567 25 mA TS 20 TA 15 10 5 TA temp. ambient TS temp. solder point 0 0 20 40 60 80 C 100 T Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 85 C Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 25 C 0.25 IF A OHL02565 t 0.25 IF A tP D = TP IF T 0.20 0.10 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.15 0.10 0.05 IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2014-03-10 t D = TP 0.20 D= 0.15 OHL02566 tP tp 10 Version 2.1 LB P4SG Package Outline 9) page 21 Mazeichnung 9) Seite 21 Approximate Weight: 6 mg Gewicht: 6 mg 2014-03-10 11 Version 2.1 LB P4SG Recommended Solder Pad 9) page 21 Empfohlenes Lotpaddesign 9) Seite 21 Reflow soldering Reflow-Loten Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation 3.6 (0.142) 0.025 (0.001) 0.7 (0.028) 2.6 (0.102) (o2.1 (0.083) +0.1 (0.004) ) (0.5 (0.020)) Bauteil positioniert, Ruckseite Component location on pad, backside Hole in PCB Lotstoplack Solder resist OHAY1307 Reflow soldering Reflow-Loten 0.7 (0.028) 2.6 (0.102) 0.8 (0.031) 0.2 (0.008) Recommended Solder Pad 9) page 21 Empfohlenes Lotpaddesign 9) Seite 21 o2.3 (0.091) Lotstoplack Solder resist Kein Lotstoplack; kein Kupfer No solder resist; no copper pad 2014-03-10 12 OHAY2629 Version 2.1 LB P4SG Note: For superior solder joint connectivity results we recommend soldering under standard nitrogen atmosphere. Package not suitable for ultra sonic cleaning. Anm.: Um eine verbesserte Lotstellenkontaktierung zu erreichen, empfehlen wir, unter StandardStickstoffatmosphare zu loten. Das Gehause ist fur Ultraschallreinigung nicht geeignet. 2014-03-10 13 Version 2.1 LB P4SG Reflow Soldering Profile Reflow-Lotprofil Preconditioning: JEDEC Level 2 acc. to JEDEC J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Profile Feature Profil-Charakteristik Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up rate to preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up rate to peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Unit Einheit K/s s K/s Liquidus temperature TL 217 Time above liquidus temperature tL 80 100 s Peak temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2014-03-10 C 14 s Version 2.1 LB P4SG 5 max. 3.75 (0.148) 0.05 (0.002) 0.3 (0.012) max. 8.1 (0.319) 0.1 (0.004) 3.5 (0.138) 0.05 (0.002) 2 (0.079) 0.05 (0.002) 1.75 (0.069) 0.05 (0.002) 1.5 (0.059) +0.1 (0.004) 4 (0.157) 1.1 (0.043) 0.05 (0.002) Cathode/Collector Side 2.8 (0.110) 0.05 (0.002) Taping 9) page 21 Gurtung 9) Seite 21 reverse mount / durch ein Loch in der Platine emittierend 0.8 (0.031) 0.05 (0.002) 0.45 (0.018) 0.05 (0.002) 1.5 (0.059) 0.05 (0.002) 0.95 (0.037) 0.05 (0.002) OHAY2512 Taping Gurtung 9) Seite 21 top mount / nach oben emittierend 0.8 (0.031) 0.05 (0.002) 5 max. 3.7 (0.146) 0.05 (0.002) (1.4 (0.055)) 0.3 (0.012) max. 8.1 (0.319) 0.1 (0.004) 3.5 (0.138) 0.05 (0.002) 2 (0.079) 0.05 (0.002) 2.7 (0.106) 0.05 (0.002) 1.5 (0.059) +0.1 (0.004) 4 (0.157) 1.1 (0.043) 0.05 (0.002) Cathode/Collector Side 1.75 (0.069) 0.05 (0.002) 9) page 21 0.95 (0.037) 0.05 (0.002) 2.25 (0.089) 0.05 (0.002) OHAY2511 2014-03-10 15 Version 2.1 LB P4SG Tape and Reel Gurtverpackung 12 mm tape with 3000 pcs. on 180 mm reel, 12000 pcs. on 330 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Leader: min. 400 mm * Trailer: min. 160 mm * *) Dimensions acc. to IEC 60286-3; EIA 481-D OHAY0324 Tape dimensions in mm (inch) Tape dim ensions in m m ( inch) W P0 P1 P2 D0 E F 12 +0.3/-0.1 4 0.1 (0.157 0.004) 4 0.1 (0.157 0.004) or 8 0.1 (0.315 0.004) 2 0.05 (0.079 0.002) 1.5 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 5.5 0.05 (0.217 0.002) Reel dimensions in mm (inch) Reel dim ensions in m m ( inch) A W Nmin W1 W2max 180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 2014-03-10 16 Version 2.1 Reel dim ensions in m m ( inch) LB P4SG A W Nmin W1 W2max 330 (13) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) EX AM PL E OSRAM Opto po BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors tors ors r RoHS Compliant (6P) BATCH NO: NO:: 1234567 1234567890 234 4 7890 8 890 ML Temp ST X XXX C X (1T) LOT NO: 1234567890 (9D) ((9D 9D D) D/C: D) D/C D : 123 D/ 1234 23 234 34 RXX Pack: R RX XX DEMY Y XXX XXX X_X123_1 12 _123 123 12 234.1234 X 23 X_X123_1234.1234 (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X XX-XX XX XXXX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE LE l k, see labe ). code (RH blan If bar . idity RH hum 0% e tive C/6 red kag rela 30 _ pac < infra of rs 90% to ak rs < ns ed (pe e). or rs Hou rs Hou ditio and ject cod C, 72 sing Hou 5 48 C sub Hou con 24 6 ces date 40 be time C ory r pro < time r time 23 will at l with fact r entC). MO Floo . time TO at at r Floo l ths that tica d ival ure OP Floo 4 if: rea w Floo labe mon iden 5 ced equ el ices g, n e 5a is el belo or 24 pro Lev 6 dev : ntin el whe cod e , w, e Lev el see e bag Lev l date mou bak ned stur e Lev reflo bar re> 10% led stur e time sea for ope e Moi r see stur k, is . Moi sea is has k, stur befo d 033 Moi in Floo RH blan Moi or-p blan in bag Car ing, r TD(if life r . If with r lf 10%bak J-S thisvapp. Yea _ eks rs < r w, met cato 1 Yea tem d, She nted at uire not > y 1 WeHou DEC Afte Indi 1. 4 uire reflo is 2. bod Mou red req /JE time 168 req : 2b r a) Sto ices idity time is IPC r or time b) ned Floo r Hum ing ce time Dev 2a r Floo a) ope 3. b) bakren Floo 1 l date Floo If 2 refe time el 4. 2a el sea Lev 3 el and e Lev el Bag e e Lev stur e Lev Dat stur e Moi stur Moi stur Moi Moi Barcode label O S R A M N s IVE S Otain TOR SIT UC TI SEN ND U Econ As bag UR ICO CThiIST SEM Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OSR Desiccant OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2014-03-10 17 Version 2.1 LB P4SG Transportation Packing and Materials Kartonverpackung und Materialien 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ Mu P- 44 (9D ) 4 20 23 3G (6P ) LO T 00 D/C : 01 998 NO : 12 O 021 H1 210 BA TC H Se SR mi AM co nd O uc pt to o rs NO : ). 5 14 2 110 0 (Q) QT Y: see labe N (1T ) O NO : TI PR OD U (X) A (G) l k, C GR OU P: Muster L VE LE code (RH blan If y bar . idit RH hum e 60% tive d C/ kag rela are 30 E S s _ infr pac < OR of 90% to ak tainITIV urs CT < or e). ted (pe urs ons Ho con NS g urs SE DU Ho and jec C, diti cod 72 sin Ho urs 5 e bag E ON 48 C sub e Ho con ces is UR 24 6 dat e MIC 40 be tim C h e ThISTSE pro < tory tim . or t wit 23 tim e at t will or fac . MO Flo al len C) s tim TO at or at Flo d or ure iva el nth s tha OP ntic Flo 4 if: rea , Flo lab ow mo ice equ ced ide 5 el e 5a is ingen el or bel 24 pro 6 Lev e dev, : el e cod , unt wh Lev el re ow see bag Lev l dat mo re bak e bar ned Lev refl istu 10% re tim for sea istu ore> re Mo see 3 istu is or . sea is Mo bef nk, istu pha nk, Flo , rd -03 Mo in RH bla Mo orbag ingCa bla hin TD life (if ar If wit t. vapp. 10%baktor J-S this elf Ye ar eks , _ < ed ica med, C 1 urs Ye erow tem Sh at uire not > y 1 WeHo DE unt Aft Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim 168 req : e 2b a) Sto es tim or mid is IPC or tim e vic ned b) or Hu Flo tim ing ce or e De 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev g el and Lev el re Ba te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo DE 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ PP: OU GR (G) : 01 O SR AM rs D/C to ) uc (9D 00 nd 21 00 21 99 8 : 4 20 NO 23 QT (Q) O SR m A ico M H H1 TC BA 3G ) : 12 (6P (X) PR OD NO : (1T ) 11 00 LO T 14 2 NO 5 Se Y: O pt o 44 Mu MY ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: ope se Muster led DE MY Barcode label ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch): Width / Breite Length / Lange Height / Hohe 195 5 (7.677 0.1968) 349 5 (13.740 0.196) 195 5 (7.677 0.1968) 349 5 (13.740 0.196) 30 5 (1.181 0.196) 33 5 (1.299 0.196) 2014-03-10 18 Version 2.1 LB P4SG Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2008 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Exempt group (Expositionsdauer 10000 s). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporar eingeschranktes Sehvermogen oder auch Nachbilder zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. Subcomponents of this LED are silverplated. Silver is discoloring when being exposed to environments containing high concentrations of aggressive substances. Corroded silver may lead to a worsening of the optical performance of the LED and can in the worst case lead to a failure of the LED. Do not expose this LED to aggressive atmospheres. Note, that corrosive gases may as well be emitted from materials close to the LED in the final product. Einzelkomponenten dieser LED sind silberbeschichtet. Silberoberflachen werden durch korrosive Substanzen verandert. Korrodiertes Silber kann zu einer Verschlechterung der optischen Eigenschaften und im schlimmsten Fall zum Ausfall der LED fuhren. Diese LED darf aggressiven Bedingungen nicht ausgesetzt werden. Es ist zu beachten, dass korrosive Gase auch von Materialien emittiert werden konnen, die sich im Endprodukt in unmittelbarer Umgebung der LED befinden. For further application related informations please visit www.osram-os.com/appnotes Fur weitere applikationsspezifische Informationen besuchen Sie bitte www.osram-os.com/appnotes 2014-03-10 19 Version 2.1 LB P4SG Date of Change: 2013-11-15 Revision Date: 2014-03-10 Version Subjects Date of change 2.0 OS-IN-2013-031 2013-11-15 Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb. Falls Sie dieses Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen** nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2014-03-10 20 Version 2.1 LB P4SG Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typically 25 ms, with an internal reproducibility of 8 % and an expanded uncertainty of 11 % (acc. to GUM with a coverage factor of k = 3). 1) Helligkeit: Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von 8 % und einer erweiterten Messunsicherheit von 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). 2) Reverse Voltage: Driving the LED in reverse direction is suitable for short term application. 2) Sperrspannung: Die LED kann Sperrrichtung betrieben werden. 3) Wavelength: The wavelength is measured at a current pulse of typically 25 ms, with an internal reproducibility of 0.5 nm and an expanded uncertainty of 1 nm (acc. to GUM with a coverage factor of k = 3). 3) Wellenlange: Die Wellenlage wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von 0,5 nm und einer erweiterten Messunsicherheit von 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). 4) Forward Voltage: The forward voltage is measured during a current pulse of typically 8 ms, with an internal reproducibility of 0.05 V and an expanded uncertainty of 0.1 V (acc. to GUM with a coverage factor of k = 3). 4) Durchlassspannung: Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von 0,05 V und einer erweiterten Messunsicherheit von 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k = 3). 5) Thermal Resistance: RthJA results from mounting on PC board FR 4 (pad size >= 5mm per pad) 5) Warmewiderstand: RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe >= 5mm je Pad) 6) Thermal Resistance: Rth max is based on statistic values (6). 6) Warmewiderstand: Rth statistischen Werten (6). 7) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 7) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 8) Relative Brightness Curve: In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Relative Helligkeitskurve: Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 9) Tolerance of Measure: Unless otherwise noted in drawing, tolerances are specified with 0.1 and dimensions are specified in mm. 9) Matoleranz: Wenn in der Zeichnung nicht anders angegeben, gilt eine Toleranz von 0,1. Mae werden in mm angegeben. 2014-03-10 21 max kurzzeitig basiert in auf Version 2.1 LB P4SG Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2014-03-10 22