R Subminiature Photoelectric Sensor E3T Omron's Next Generation of Sub-miniature Photoelectric Sensors H Utilizes Omron's "Hyper LED" technology H H H H H H H H to achieve the industry's smallest visible red beam Self-contained sensor ideal for space-restricted applications "Pin-point" beam for detecting extremely small objects Offered in both flat and rectangular body styles Retroreflective model employs Omron's Free-Angle Optics technology (FAO) to detect objects as small as 2 mm dia. Convergent-beam model spot diameter is 0.15 mm Through-beam model is capable of sensing distances of 1 meter with a 2 mm target diameter CE conformance Robotic cable versions available (See Note 2, below.) Ordering Information J PHOTOELECTRIC SENSORS Sensing method Sensor type yp Retroreflective Diffuse reflective Convergent-beam Appearance pp Through-beam Side-view Flat Side-view Flat Side-view Sensing distance 1m 500 mm 10 to 200 mm 5 to 30 mm 5 to 15 mm 5 to 30 mm NPN E3T-ST11 E3T-FT11 E3T-SR11 E3T-FD11N E3T-SL11 E3T-SL21 PNP E3T-ST13 E3T-FT13 E3T-SR13 E3T-FD13N E3T-SL13 E3T-SL23 NPN E3T-ST12 E3T-FT12 E3T-SR12 E3T-FD12N E3T-SL12 E3T-SL22 PNP E3T-ST14 E3T-FT14 E3T-SR14 E3T-FD14N E3T-SL14 E3T-SL24 Part number Light-ON g Dark-ON Note: 1. All through-beam models are packaged and sold as pairs (one transmitter and one receiver). 2. E3T sensors are available with robotic cable. To order, add the letter "R" to the end of the part number. Example: E3T-ST11R 3. 5-M cable models are available. To order, add the desigination 5M to the end of the part number. Example: E3T-T11 5M E3T E3T J ACCESSORIES (ORDER SEPARATELY) Slits (Apertures) Slits for sensor models Slit width Sensing distance Minimum sensing object (typical) Comments Part number E3T-ST1j 3 S j 0.5 dia. 50 mm 0.5 mm wide E39-S63 1 dia. 100 mm 1 mm wide One each for Emitter and d Receiver R i Slits for sensor models Slit width Sensing distance Minimum sensing object (typical) Comments Part number j E3T-FT1j 3 0.5 dia. 50 mm 0.5 mm wide E39-S64 1 dia. 100 mm 1 mm wide One each for Emitter and d Receiver R i Item Sensing distance Minimum sensing object (typical) Part number Compact retroreflective model 10 to 200 mm 2 mm wide E39-R4 (See Note.) Reflectors 10 to 100 mm Note: E39-R37 E39-R4 reflector included with the E3T-SR1j (can also be ordered separately). Adjustable Aperture For sensor models Appearance Part number E39-E10 E3T-ST1j Mounting Brackets For sensor models E3T-Sj Appearance Comments Part number Two mounting brackets are required for through-beam models. E39-L116 E39-L117 E39-L118 E3T-Fj E39-L119 E39-L120 2 E3T E3T Specifications J RATINGS/CHARACTERISTICS Sensing method Through-beam Shape Side-view Flat Output type NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP NPN PNP Light-ON -ST11 -ST13 -FT11 -FT13 -SR11 -SR13 -SL11 -SL13 -SL21 -SL23 -FD11 -FD13 Dark-ON -ST12 -ST14 -FT12 -FT14 -SR12 -SR14 -SL12 -SL14 -SL22 -SL24 -FD12 -FD14 Sensing distance 1m (adjustable aperture is available) 500 mm Standard sensing target Min. sensing target (typical) Hysteresis --- Part number Optical p angle l Retroreflective Convergent beam Flat 10 to 200 mm (with the E39-R4) 5 to 15 mm (50 x 50 mm Kodak white card) 2 mm dia. min. 10 mm dia. min. --- 2 mm dia. min. 2 mm dia. (sensing distance at 100 mm) 0.15 mm dia. (sensing distance at 10 mm) 2 mm max. Emitter 3 to 10 3 to 13 2 to 5 Receiver 3 to 70 3 to 70 --- 5 to 30 mm (50 x 50 mm Kodak white card) 6 mm max. 5 to 30 mm (50 x 50 mm Kodak white card) 6 mm max. --- Light source (wave length) Red LED ("Pin-point" LED) (=670 nm) Power supply voltage 12 to 24 VDC 10%, ripple (p-p) 10% max. Current consumption 12 mA max. max emitter/receiver Output Open collector, load current: 50 mA max. at 24 VDC, residual voltage: 1 V max., operation mode: Light-ON or Dark-ON (separate models) Circuit protection (See Precautions Section.) Protection from reversed and output short-circuit Response time 1 ms max. each for on and off 24 VDC 10% 20 mA max. max Protection from reversed polarity, output short-circuit, and mutual interference Ambient g light i immunity it Incandes- 5,000 x max. cent lamp Sunlight 10,000 x max. Ambient temperature Operating --25C to 55C (--13F to 131F) Storage --40C to 70C (--40F to 158F) with no icing or condensation Ambient h idi humidity Operating 35% to 85% RH Storage Diffuse reflective Side-view 35% to 95% RH (with no condensation) Insulation resistance 20 M min. (at 500 VDC) Dielectric strength 1,000 VAC, 50/60 Hz for 1 min Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude or 300 m/s2 (approx. 30G) for 0.5 hrs each in X, Y, and Z axis Shock resistance 1,000 m/s2 (approx. 100G) 3 times each in X, Y, and Z axis Enclosure rating IEC60529: IP67 Connection method Pre-leaded (standard length: 2 m), optional 5-M cable, optional robotic cable Weight (with packaging) Approx. 40 g Materials Case PBT Lens and cover Polycarbonate Accessories included Approx. 20 g Two each of M2 mounting screws, spring washers, and flat washers, and reflector (E39-R4: retroreflective model only) 3 E3T E3T Engineering Data J EXCESS GAIN VS. SET DISTANCE (TYPICAL) Excess gain ratio E3T-FD1j (Diffuse Reflective) Operation level White paper Black paper Set distance (mm) 4 Excess gain ratio Excess gain ratio Set distance (mm) Operation level 0 400 800 1200 1600 2000 Set distance (mm) E3T-SL1j (Convergent Beam) Operation level White paper Operation level Set distance (mm) E3T-SL2j (Convergent Beam) Excess gain ratio Operation level E3T-SR1j with E39-R4 (Retroreflective) E3T-FT1j (Through-beam) Excess gain ratio Excess gain ratio E3T-ST1j (Through-beam) White paper Operation level Black paper Set distance (mm) Black paper Set distance (mm) E3T E3T J PARALLEL OPERATING RANGE (TYPICAL) E3T-ST1j with Slit (Aperture) (Through-Beam) E3T-ST1j with Slit (Enlarged graph) (Through-Beam) E3T-SR1j with E39-R4 (Retroreflective) 400 800 1,200 1,600 2,000 Distance X (mm) 0.5-dia. Slit 200 1-dia. Slit 400 1-dia. Slit Distance X (mm) Without Slit 600 800 Distance X (mm) E3T-FT1j with Slit (Enlarged graph) (Through-Beam) Distance Y (mm) Distance Y (mm) E3T-FT1j with Slit (Through-Beam) 0.5-dia. Slit Distance Y (mm) 1-dia. Slit 0.5-dia. Slit Distance Y (mm) Distance Y (mm) Without Slit 0.5-dia. Slit 1-dia. Slit Distance X (mm) 1,000 Distance X (mm) J ANGLE CHARACTERISTICS (TYPICAL) (Left and Right) Sensing target: 100 x 100 mm white paper Angle () Sensing distance change rate (%) E3T-SL1j (Up and Down) Sensing distance change rate (%) E3T-SL1j Sensing target: 100 x 100 mm white paper Angle () 5 E3T E3T J CLOSE-DISTANCE SENSING CAPABILITY (TYPICAL) E3T-SL1j, E3T-SL2j, E3T-FD1j Sensing distance (mm) j White paper J Black paper E3T-SL1j E3T-SL2j E3T-FD1j J SENSING TARGET SIZE VS. SENSING DISTANCE (TYPICAL) E3T-SL1j E3T-FD1j, E3T-SL2j Min. sensing target dia. (mm) Min. sensing target dia. (mm) Sensing target: Pin-gauge, stainless steel Sensing distance (mm) E3T-FD1j E3T-SL2j Sensing distance (mm) J OPERATION RANGE (TYPICAL) E3T-FD1j (Diffuse Reflective) E3T-SL1j (Convergent Beam) 6 Sensing target: 50 x 50 mm white paper Sensing distance X (mm) Sensing distance X (mm) Operating position Y (mm) Sensing target: 50 x 50 mm white paper Operating position Y (mm) Operating position Y (mm) Sensing target: 50 x 50 mm white paper E3T-SL2j (Convergent Beam) Sensing distance X (mm) E3T E3T J SENSING DISTANCE CHARACTERISTICS OF ADJUSTABLE APERTURE (WHEN COMPLETING OPTICAL AXIS ADJUSTMENT) Sensing distance (m) E3T-SL1j with E39-E10 Sensitivity adjustment level Operation J OUTPUT CIRCUITS NPN models E3T-jjj1 E3T-jjj2 Operation mode Light-ON Dark-ON Output circuit Operation indicator (Orange) Brown Stability indicator (Green) 12 to 24 VDC 50 mA max. Black Photoelectric Sensor main circuit Load 0V Blue PNP models E3T-jjj3 E3T-jjj4 Operation mode Light-ON Dark-ON Output circuit Receiver (through-beam models), Retroreflective, diffuse reflective, and convergent beam models Operation indicator (Orange) Brown Stability indicator (Green) Black Photoelectric Sensor main circuit Internal circuit 50 mA max. 12 to 24 VDC Load Blue Emitter (through-beam models) Brown Photoelectric Sensor main circuit 12 to 24 VDC Blue 7 E3T E3T J TIMING CHART Diffuse and convergent g beam Light-ON Dark-ON Target present Target present Target not present OFF Output transistor OFF ON Operation indicator (orange) ON Load De-energized ON OFF ON Output transistor Energized Load Retroreflective/through-beam / g Target not present Operation indicator (orange) OFF Energized De-energized Light-ON Dark-ON Target present Target present Target not present Target not present Operation indicator (orange) OFF Output transistor OFF Load ON Operation indicator (orange) ON Output transistor Energized Load De-energized ON OFF ON OFF Energized De-energized Dimensions Unit: mm (inch) J SIDE-VIEW SENSORS Through-Beam Models E3T-ST11 E3T-ST12 E3T-ST13 E3T-ST14 Mounting Holes Emitter 7 (0.28) Lens: 1.7 dia. Receiver Operation indicator Lens: 2 dia. Emitter Receiver 9.5 (0.37) Two, M2 7 (0.28) Stability indicator (0.59) Two, 2.2 dia. 14.6 (0.57) 18.5 (0.73) Polyvinyl chloride-covered cable, 2.4-mm dia. (7/0.127 dia.), Robotic cable (20/0, 0.08-mm dia.), 2 conductors, emitter 3 conductors, receivers Standard length: 2 m 8 E3T E3T Retroreflective Models E3T-SR11 E3T-SR12 E3T-SR13 E3T-SR14 11 (0.43) 7 (0.28) Operation indicator Stability indicator Mounting Holes Two, M2 Two, 2.2 dia. Len: 2 dia. 20.6 (0.81) Emitter and Receiver (0.59) 24.5 (0.96) Polyvinyl chloride-covered cable, 2.4-mm dia. (7/0.127 dia.), Robotic cable (20/0, 0.08-mm dia.), 3 conductor Standard length: 3 m Convergent-Beam Models E3T-SL11 E3T-SL12 E3T-SL13 E3T-SL14 E3T-SL21 E3T-SL22 E3T-SL23 E3T-SL24 11 (0.43) 7 (0.28) Operation indicator Lens 3.7 x 2 Emitter Stability indicator Mounting Holes Two, 2.2 dia. Two, M2 20.6 (0.81) 24.5 (0.96) (0.59) Receiver Lens 4.4 x 2 Polyvinyl chloride-covered cable 2.4-mm dia. (7/0.127 dia.), Robotic cable (20/0, 0.08-mm dia.), 3 conductor Standard length: 3 m 9 E3T E3T Unit: mm (inch) J FLAT THIN SENSORS Through-Beam Emitter and Receiver Models E3T-FT11 E3T-FT12 E3T-FT13 E3T-FT14 Mounting Holes Two, M2 Operation indicator (See Note below) 12 (0.47) Stability indicator 3.5 (See Note.) (0.13) Two, R2 0.2 (0.008) (0.31) Optical axis 15.8 (0.62) Lens 1.3 dia. 19 (0.75) Two, 2.2 dia. Polyvinyl chloride-covered cable 2.4-mm dia. (7/0.127 dia.), Robotic cable (20/0, 0.08-mm dia.) 3 conductor Standard length: 2 m Note: For E3T-FT11 and E3T-FT12 Receivers only. Diffuse Reflective Models E3T-FD11-N E3T-FD12-N E3T-FD13-N E3T-FD14-N Mounting Holes Operation indicator 12 (0.47) Two, M2 Stability indicator Two, R2 0.2 3.5 (0.14) (0.31) Lens 1.5 dia. Emitter 20.8 (0.82) Optical axis 24 (0.94) Receiver Lens 3.1 dia. Two, 2.2 dia. 1.75 Polyvinyl chloride-covered cable, 2.4-mm dia. (7/0.127 dia.), Robotic cable (20/0, 0.08-mm dia.) 3 conductor Standard length: 2 m J REFLECTORS Retroreflector 13.7 (0.54) 4.9 (0.19) E39-R4 (Provided with the E3T-SR1j) 23 (0.91) Two, 2.2 dia. 10 E3T E3T E39-R37 Reflector 13.7 (0.54) 23 (0.91) Reflector 0.6 (with adhesive) Two 3.1 dia Stainless steel mounting plate 0.5 301 Stainless steel Note: A reflector and a stainless steel mounting plate are supplied together as a set. J SLITS/APERTURES (ORDER SEPARATELY) Shown with Sensor E39-S63 (Use with E3T-ST1j) 7.4 (0.29) Two, 2.2 dia. 1.00.05 dia. 0.50.05 dia. 7.4 (0.29) E39-S64 (Use with E3T-FT1j) 9.7 (0.38) 4.1 (0.16) 12.3 (0.48) 12.6 (0.50) Notch Material: 0.2-mm-thick stainless steel (301 Stainless) 1 dia. 0.5 dia. Note: Align the notch direction of the slit when installing on the Emitter and Receiver. Use of E39-E10 Adjustable Aperture Adjustable Aperture (Example Dark-ON: E3T-ST12/ST14) E39-E10 (Use with E3T-ST1j) (At Min.) With the Adjustable Aperture Unit in Place (At Center) (At Max.) Indicator Adjuster 7.4 (0.29) 15.1 (0.59) Optical axis 2 dia. 18.7 (0.74) For Dark-ON: 1. Mount the unit on the receiver. 2. Set the adjuster of the Unit to Max (factory setting is at Max). 3. Adjust the optical axis (align) and tighten mounting hardware. 4. Place a target between emitter and receiver and gradually turn the adjuster counterclockwise toward the Min side. Stop turning the adjuster when the operation indicator and stability indicator (green) turn ON. 5. Remove the target and confirm that the operation indicator is OFF and the stability indicator (green) is ON. Note: For Light-ON, adjustment is similar, except that indicators would operate in opposite manner as with Dark-ON. 11 E3T E3T Unit: mm (inch) J MOUNTING BRACKETS E39-L116 (Use with E3T-Sjjj) Order Separately Two, R1.7 17.8 (0.70) Two, R2 Two, R2 10.3 (0.41) Material: 1.2-mm-thick stainless steel (SS 304) 31.2 (1.23) Two, R1.1 9.7 (0.38) 17.8 (0.70) Two, R1.2 R1.5 max. 10 (0.39) E39-L116 (Use with E3T-ST1j) Four, R2 Three, M2 20.5 (0.81) 31 (1.22) 7 (0.28) 12 Two, M2 x 12 31.2 (1.23) 24.5 (0.96) E3T E3T Order brackets separately. E39-L117 (Use with E3T-Sjjj) R1 max. Two, R1.7 Two, R2 Two, R2 11.2 (0.44) Material: 1.2-mm-thick stainless steel (SS 304) 18 (0.71) 23 (0.91) Two, R1.7 3.4 (0.13) 4.5 (0.18) Two, R1.1 11.2 (0.44) E39-L117 (Shown with E3T-ST1j) 10.3 (0.41) 11.2 (0.44) Two, M2 x 12 Four, R2 20.5 (0.80) Three, M2 10.2 (0.40) 11.2 (0.44) 23 (0.91) 13 E3T E3T Unit: mm (inch) Order brackets separately. E39-L118 (Use with E3T-Sjjj) 11.5 (0.45) 11.5 (0.45) 22.7 (0.89) Two, R1.7 Material: 1.2-mm-thick stainless steel (SS 304) 15 (0.59) 5 (0.20) Two, R1.1 23 (0.91) Four, R2 7.7 (0.30) E39-L118 (Shown with E3T-ST1j) Four, R2 Three, M2 Two, M2 x 12 20.5 (0.81) 15 (0.59) 14 16.3 (0.64) 13.2 (0.52) 23 (0.91) E3T E3T Mounting Brackets for E3T-FT1j/E3T-FD1j E39-L119 E39-L119 Shown with E3T-Fj1j 10.5 (0.41) 8 (0.31) 16 (0.63) Four, M2 tapping holes 9 (0.35) 8 (0.31) 12 (0.47) 9 (0.35) 7 (0.28) E39-L120 10.6 (0.42) Two, M2 x 4 E39-L120 (Shown with E3T-Fj1j) 22.5 (0.89) Four, M2 tapping holes 8 (0.31) 3.2 2.4 (0.09) 13.5 (0.53) 16 (0.63) 12 (0.47) 2.4 (0.09) Two, M2 x 4 15 E3T E3T Precautions J LOAD SHORT-CIRCUIT PROTECTION Caution J AVOID DAMAGE TO THE E3T * * * Do not exceed the rated voltage on the E3T. Do not short-circuit the load connected to the E3T. When supplying power to the E3T, make sure that the polarity of the power is correct. J OPERATING ENVIRONMENT To avoid malfunction, DO NOT install the E3T in the following environments: * * * * Locations where the E3T is exposed to intense sunlight. Locations with high humidity and where condensation may result. Locations with corrosive gas. Locations with vibration or shock affecting the E3T. J HIGH-TENSION LINES To avoid Sensor damage or malfunctioning due to induction noise, do not place the power supply lines of the Photoelectric Sensor within the same conduit as power lines or high-tension lines. The E3T incorporates a load short-circuit protection function. If the load short-circuits, the output of the E3T will be turned OFF. Recheck the wiring and turn on the E3T again to reset the load short-circuit protection function. The load short-circuit protection function will work if there is a current flow that is 2.4 times larger than the rated load current. When using an inductance load, be sure that the inrush current will not exceed 2.4 times larger than the rated current. J CLEANING DO NOT apply paint thinner when cleaning the E3T. Paint thinner will damage the casing of the E3T. J INDICATORS The following graphs indicate the status of each operation level. Be sure to use the E3T within the stable operating range. Stable operation range Unstable operation range Stable operation range J CABLE The cable can be extended up to 100 m provided that cable thickness does not exceed the 0.3 mm2 maximum. Light ! Avoid damage to the E3T: NEVER apply AC power to the E3T. Note: J POWER SUPPLIES Stability indicator (green) ON Operation level x 1.2 Operation level Operation indicator (orange) E3T-jjj1 E3T-jjj2 E3T-jjj3 E3T-jjj4 ON OFF OFF ON OFF Operation level x 0.8 ON When the E3T's operation level is set to the stable operation range, the E3T will be in its most reliable operation without being influenced by temperature, voltage fluctuation, dust, or mounting changes. If a switching regulator is connected to the E3T, you must ground the FG (frame ground) and G (ground) terminals, or the switching noise of the switching regulator may cause the E3T to malfunction. J TURNING ON POWER SUPPLY J WATER RESISTANCE * * * Do not use the E3T underwater, outdoors, or in the rain. Use M2 screws and washers to mount the E3T. When mounting the E3T, NEVER strike the E3T with a hammer, or the E3T will lose its watertight properties. * The E3T will be ready for sensing 100 ms after the power is turned ON. If the E3T is connected to a power source different from one for loads, be sure to turn ON the power supply to the E3T first. NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS LLC OMRON ON--LINE OMRON CANADA, INC. 1-800-55-OMRON Global -- http://www.omron.com USA -- http://www.omron.com/oei Canada -- http://www.omron.com/oci 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. E262-E3-3 1/02 Specifications subject to change without notice. 885 Milner Avenue Scarborough, Ontario M1B 5V8 Printed in U.S.A.