ECA-1AHG222 - Panasonic - Datasheet.Live

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ NHG

– EEE-99 –

08

0D±0.5

F±0.5

Sleeve

14 min.

3 min.

=L16 : L±1.0

L20 : L±2.0

Pressure relief

06.3+

–

010

0D±0.5

fd±0.05

■ Features

● Endurance : 105 °C 1000 h to 2000 h

● RoHS directive compliant

Radial Lead Type

Series: NHG Type: A

■ Speci cations

Category Temp. Range –55 °C to +105 °C –25 °C to +105 °C

Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC

Nominal Cap. Range 2.2 μF to 22000 μF 1 μF to 330 μF

Capacitance Tolerance ±20 % (120 Hz/+20 °C)

DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes

(Which is greater) I < 0.06 CV +10 (μA) After 2 minutes

tan dPlease see the attached standard products list

Endurance

After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum

of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors

are restored to 20 °C, the capacitors shall meet the limits speciﬁ ed below.

Duration : 6.3 V.DC to 100 V.DC : (05 to 08)=1000 hours, (010 to 018)=2000 hours

160 V.DC to 450 V.DC : 2000 hours

Capacitance change ±20 % of initial measured value

tan d< 200 % of initial speciﬁ ed value

DC leakage current < initial speciﬁ ed value

Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized

at +20 °C, capacitors shall meet the limits speciﬁ ed in Endurance. (With voltage treatment)

■ Di men sions in mm (not to scale)

W.V.(V.DC) Cap. (μF) Frequency (Hz)

60 120 1 k 10 k 100 k

6.3 to 100

2.2 to 33 0.75 1.00 1.55 1.80 2.00

47 to 470 0.80 1.00 1.35 1.50 1.50

1000 to 22000 0.85 1.00 1.10 1.15 1.15

160 to 450 1 to 330 0.80 1.00 1.35 1.50 1.50

■ Frequency correction factor for ripple current

Body Dia. 0D5 6.3 8 1012.516 18

Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8

Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5

(Unit : mm)

03 Mar. 2015

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ NHG

– EEE-100 –

■ Standard Prod ucts

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(120 Hz)

(+105 °C)

tan d

(120 Hz)

(+20 °C)

Endur-

ance

Lead

Dia.

Lead Space

Straight

Leads

Taping

Straight

Taping

✽B

Taping

✽i

(V) (μF) (mm) (mm)

(mA r.m.s.)

(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)

6.3

220 5 11 140 0.28 1000 0.5 2.0 5.0 2.5 ECA0JHG221( ) 200 2000

470 6.3 11.2 230 0.28 1000 0.5 2.5 5.0 2.5 ECA0JHG471( ) 200 2000

1000 8 11.5 380 0.28 1000 0.6 3.5 5.0 ECA0JHG102( ) 200 1000

2200 10 16 710 0.30 2000 0.6 5.0 5.0 ECA0JHG222( ) 200 500

3300 10 20 840 0.32 2000 0.6 5.0 5.0 ECA0JHG332( ) 200 500

4700 12.5 20 1090 0.34 2000 0.6 5.0 5.0 ECA0JHG472( ) 200 500

6800 12.5 25 1350 0.38 2000 0.6 5.0 5.0 ECA0JHG682( ) 200 500

10000 16 25 1650 0.46 2000 0.8 7.5 7.5 ECA0JHG103( ) 100 250

15000 16 31.5 2010 0.56 2000 0.8 7.5 ECA0JHG153 100

22000 18 35.5 2350 0.70 2000 0.8 7.5 ECA0JHG223 50

330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 ECA1AHG331( ) 200 2000

470 8 11.5 250 0.24 1000 0.6 3.5 5.0 ECA1AHG471( ) 200 1000

1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 ECA1AHG102( ) 200 500

2200 10 20 760 0.26 2000 0.6 5.0 5.0 ECA1AHG222( ) 200 500

3300 12.5 20 1000 0.28 2000 0.6 5.0 5.0 ECA1AHG332( ) 200 500

4700 12.5 25 1260 0.30 2000 0.6 5.0 5.0 ECA1AHG472( ) 200 500

6800 16 25 1570 0.34 2000 0.8 7.5 7.5 ECA1AHG682( ) 100 250

10000 16 31.5 1890 0.42 2000 0.8 7.5 ECA1AHG103 100

15000 18 35.5 2180 0.52 2000 0.8 7.5 ECA1AHG153 50

10 0 5 11 110 0. 2 0 10 0 0 0. 5 2 .0 5. 0 2. 5 ECA1CHG101( ) 200 2000

220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 ECA1CHG221( ) 200 2000

330 8 11.5 260 0.20 1000 0.6 3.5 5.0 ECA1CHG331( ) 200 1000

470 8 11.5 310 0.20 1000 0.6 3.5 5.0 ECA1CHG471( ) 200 1000

1000 10 16 560 0.20 2000 0.6 5.0 5.0 ECA1CHG102( ) 200 500

2200 12.5 20 920 0.22 2000 0.6 5.0 5.0 ECA1CHG222( ) 200 500

3300 12.5 25 1170 0.24 2000 0.6 5.0 5.0 ECA1CHG332( ) 200 500

4700 16 25 1480 0.26 2000 0.8 7.5 7.5 ECA1CHG472( ) 100 250

6800 16 31.5 1780 0.30 2000 0.8 7.5 ECA1CHG682 100

10000 18 35.5 2060 0.38 2000 0.8 7.5 ECA1CHG103 50

47 5 11 91 0.16 1000 0.5 2.0 5.0 2.5 ECA1EHG470( ) 200 2000

100 6.3 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 ECA1EHG101( ) 200 2000

220 8 11.5 230 0.16 1000 0.6 3.5 5.0 ECA1EHG221( ) 200 1000

330 8 11.5 310 0.16 1000 0.6 3.5 5.0 ECA1EHG331( ) 200 1000

470 10 12.5 380 0.16 2000 0.6 5.0 5.0 ECA1EHG471( ) 200 500

1000 10 20 680 0.16 2000 0.6 5.0 5.0 ECA1EHG102( ) 200 500

2200 12.5 25 1090 0.18 2000 0.6 5.0 5.0 ECA1EHG222( ) 200 500

3300 16 25 1400 0.20 2000 0.8 7.5 7.5 ECA1EHG332( ) 100 250

4700 16 31.5 1750 0.22 2000 0.8 7.5 ECA1EHG472 100

6800 18 35.5 2040 0.26 2000 0.8 7.5 ECA1EHG682 50

47 5 11 90 0.14 1000 0.5 2.0 5.0 2.5 ECA1VHG470( ) 200 2000

100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 ECA1VHG101( ) 200 2000

220 8 11.5 270 0.14 1000 0.6 3.5 5.0 ECA1VHG221( ) 200 1000

330 10 12.5 350 0.14 2000 0.6 5.0 5.0 ECA1VHG331( ) 200 500

470 10 16 460 0.14 2000 0.6 5.0 5.0 ECA1VHG471( ) 200 500

1000 12.5 20 810 0.14 2000 0.6 5.0 5.0 ECA1VHG102( ) 200 500

2200 16 25 1260 0.16 2000 0.8 7.5 7.5 ECA1VHG222( ) 100 250

3300 16 31.5 1610 0.18 2000 0.8 7.5 ECA1VHG332 100

4700 18 35.5 1910 0.20 2000 0.8 7.5 ECA1VHG472 50

· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.

· Please refer to the page of “Taping Dimensions”.

03 Mar. 2015

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ NHG

– EEE-101 –

■ Standard Prod ucts

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(120 Hz)

(+105 °C)

tan d

(120 Hz)

(+20 °C)

Endur-

ance

Lead

Dia.

Lead Space

Straight

Leads

Taping

Straight

Taping

✽B

Taping

✽i

(V) (μF) (mm) (mm)

(mA r.m.s.)

(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)

2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG2R2( ) 200 2000

3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG3R3( ) 200 2000

4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG4R7( ) 200 2000

10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG100( ) 200 2000

22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG220( ) 200 2000

33 5 11 90 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG330( ) 200 2000

47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 ECA1HHG470( ) 200 2000

100 8 11.5 180 0.12 1000 0.6 3.5 5.0 ECA1HHG101( ) 200 1000

220 10 12.5 300 0.12 2000 0.6 5.0 5.0 ECA1HHG221( ) 200 500

330 10 16 410 0.12 2000 0.6 5.0 5.0 ECA1HHG331( ) 200 500

470 10 20 530 0.12 2000 0.6 5.0 5.0 ECA1HHG471( ) 200 500

1000 12.5 25 950 0.12 2000 0.6 5.0 5.0 ECA1HHG102( ) 200 500

2200 16 31.5 1470 0.14 2000 0.8 7.5 ECA1HHG222 100

3300 18 35.5 1770 0.16 2000 0.8 7.5 ECA1HHG332 50

10 5 11 46 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG100( ) 200 2000

22 5 11 71 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG220( ) 200 2000

33 6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG330( ) 200 2000

47 6.3 11.2 120 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG470( ) 200 2000

100 10 12.5 215 0.10 2000 0.6 5.0 5.0 ECA1JHG101( ) 200 500

220 10 16 335 0.10 2000 0.6 5.0 5.0 ECA1JHG221( ) 200 500

330 10 20 510 0.10 2000 0.6 5.0 5.0 ECA1JHG331( ) 200 500

470 12.5 20 640 0.10 2000 0.6 5.0 5.0 ECA1JHG471( ) 200 500

1000 16 25 930 0.10 2000 0.8 7.5 7.5 ECA1JHG102( ) 100 250

2200 18 35.5 1610 0.12 2000 0.8 7.5 ECA1JHG222 50

100

2.2 5 11 21 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG2R2( ) 200 2000

3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG3R3( ) 200 2000

4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG4R7( ) 200 2000

10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG100( ) 200 2000

22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG220( ) 200 2000

· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.

· Please refer to the page of “Taping Dimensions”.

03 Mar. 2015

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ NHG

– EEE-102 –

■ Standard Prod ucts

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(120 Hz)

(+105 °C)

tan d

(120 Hz)

(+20 °C)

Endur-

ance

Lead

Dia.

Lead Space

Straight

Leads

Taping

Straight

Taping

✽B

Taping

✽i

(V) (μF) (mm) (mm)

(mA r.m.s.)

(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)

100

33 8 11.5 130 0.08 1000 0.6 3.5 5.0 ECA2AHG330( ) 200 1000

47 10 12.5 165 0.08 2000 0.6 5.0 5.0 ECA2AHG470( ) 200 500

100 10 20 265 0.08 2000 0.6 5.0 5.0 ECA2AHG101( ) 200 500

220 12.5 25 440 0.08 2000 0.6 5.0 5.0 ECA2AHG221( ) 200 500

330 16 25 540 0.08 2000 0.8 7.5 7.5 ECA2AHG331( ) 100 250

470 16 25 715 0.08 2000 0.8 7.5 7.5 ECA2AHG471( ) 100 250

1000 18 35.5 985 0.08 2000 0.8 7.5 ECA2AHG102 50

160

1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG010( ) 200 2000

2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG2R2( ) 200 2000

3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG3R3( ) 200 2000

4.7 6.3 11.2 43 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG4R7( ) 200 2000

10 10 12.5 70 0.15 2000 0.6 5.0 5.0 ECA2CHG100( ) 200 500

22 10 20 130 0.15 2000 0.6 5.0 5.0 ECA2CHG220( ) 200 500

33 10 20 180 0.15 2000 0.6 5.0 5.0 ECA2CHG330( ) 200 500

47 12.5 20 220 0.15 2000 0.6 5.0 5.0 ECA2CHG470( ) 200 500

100 16 25 335 0.15 2000 0.8 7.5 7.5 ECA2CHG101( ) 100 250

220 16 31.5 540 0.15 2000 0.8 7.5 ECA2CHG221 100

330 18 31.5 705 0.15 2000 0.8 7.5 ECA2CHG331 50

200

1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG010( ) 200 2000

2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG2R2( ) 200 2000

3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG3R3( ) 200 2000

4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2DHG4R7( ) 200 1000

10 10 16 80 0.15 2000 0.6 5.0 5.0 ECA2DHG100( ) 200 500

22 10 20 140 0.15 2000 0.6 5.0 5.0 ECA2DHG220( ) 200 500

33 12.5 20 190 0.15 2000 0.6 5.0 5.0 ECA2DHG330( ) 200 500

47 12.5 20 220 0.15 2000 0.6 5.0 5.0 ECA2DHG470( ) 200 500

100 16 25 335 0.15 2000 0.8 7.5 7.5 ECA2DHG101( ) 100 250

220 18 31.5 575 0.15 2000 0.8 7.5 ECA2DHG221 50

250

1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 ECA2EHG010( ) 200 2000

2.2 6.3 11.2 29 0.15 2000 0.5 2.5 5.0 2.5 ECA2EHG2R2( ) 200 2000

3.3 8 11.5 42 0.15 2000 0.6 3.5 5.0 ECA2EHG3R3 200 1000

4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2EHG4R7( ) 200 1000

10 10 16 88 0.15 2000 0.6 5.0 5.0 ECA2EHG100( ) 200 500

22 12.5 20 155 0.15 2000 0.6 5.0 5.0 ECA2EHG220( ) 200 500

33 12.5 20 190 0.15 2000 0.6 5.0 5.0 ECA2EHG330( ) 200 500

47 12.5 25 230 0.15 2000 0.6 5.0 5.0 ECA2EHG470( ) 200 500

100 16 31.5 365 0.15 2000 0.8 7.5 ECA2EHG101 100

350

1 6.3 11.2 18 0.20 2000 0.5 2.5 5.0 2.5 ECA2VHG010( ) 200 2000

2.2 8 11.5 31 0.20 2000 0.6 3.5 5.0 ECA2VHG2R2( ) 200 1000

3.3 10 12.5 38 0.20 2000 0.6 5.0 5.0 ECA2VHG3R3( ) 200 500

4.7 10 16 50 0.20 2000 0.6 5.0 5.0 ECA2VHG4R7( ) 200 500

10 10 20 82 0.20 2000 0.6 5.0 5.0 ECA2VHG100( ) 200 500

22 12.5 20 130 0.20 2000 0.6 5.0 5.0 ECA2VHG220( ) 200 500

33 16 25 195 0.20 2000 0.8 7.5 7.5 ECA2VHG330( ) 100 250

47 16 25 230 0.20 2000 0.8 7.5 7.5 ECA2VHG470( ) 100 250

100 18 31.5 375 0.20 2000 0.8 7.5 ECA2VHG101 50

· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.

· Please refer to the page of “Taping Dimensions”.

03 Mar. 2015

Design and speciﬁ cations are each subject to change without notice. Ask factory for the current technical speciﬁ cations before purchase and/or use.

Should a safety concern arise regarding this product, please be sure to contact us immediately.

Aluminum Electrolytic Capacitors/ NHG

– EEE-103 –

■ Standard Prod ucts

W.V. Cap.

(±20 %)

Case size Speciﬁ cation Lead Length

Part No.

Min. Packaging Q'ty

Dia. Length

Ripple

Current

(120 Hz)

(+105 °C)

tan d

(120 Hz)

(+20 °C)

Endur-

ance

Lead

Dia.

Lead Space

Straight

Leads

Taping

Straight

Taping

✽B

Taping

✽i

(V) (μF) (mm) (mm)

(mA r.m.s.)

(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)

400

1 6.3 11.2 18 0.24 2000 0.5 2.5 5.0 2.5 ECA2GHG010( ) 200 2000

2.2 8 11.5 30 0.24 2000 0.6 3.5 5.0 ECA2GHG2R2( ) 200 1000

3.3 10 12.5 40 0.24 2000 0.6 5.0 5.0 ECA2GHG3R3( ) 200 500

4.7 10 16 50 0.24 2000 0.6 5.0 5.0 ECA2GHG4R7( ) 200 500

10 10 20 80 0.24 2000 0.6 5.0 5.0 ECA2GHG100( ) 200 500

22 12.5 25 145 0.24 2000 0.6 5.0 5.0 ECA2GHG220( ) 200 500

33 16 25 195 0.24 2000 0.8 7.5 7.5 ECA2GHG330( ) 100 250

47 16 31.5 250 0.24 2000 0.8 7.5 ECA2GHG470 100

450

1 8 11.5 18 0.24 2000 0.6 3.5 5.0 ECA2WHG010( ) 200 1000

2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 ECA2WHG2R2( ) 200 500

3.3 10 16 41 0.24 2000 0.6 5.0 5.0 ECA2WHG3R3( ) 200 500

4.7 10 20 49 0.24 2000 0.6 5.0 5.0 ECA2WHG4R7( ) 200 500

10 12.5 20 75 0.24 2000 0.6 5.0 5.0 ECA2WHG100( ) 200 500

22 16 25 115 0.24 2000 0.8 7.5 7.5 ECA2WHG220( ) 100 250

33 16 31.5 155 0.24 2000 0.8 7.5 ECA2WHG330 100

· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.

· Please refer to the page of “Taping Dimensions”.

03 Mar. 2015

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Panasonic:

ECA-0JHG101 ECA-0JHG102 ECA-0JHG103 ECA-0JHG153 ECA-0JHG221 ECA-0JHG222 ECA-0JHG223

ECA-0JHG331 ECA-0JHG332 ECA-0JHG471 ECA-0JHG472 ECA-0JHG682 ECA-1CHG332 ECA-1CHG470 ECA-

1CHG471 ECA-1CHG472 ECA-1CHG682 ECA-1AHG153 ECA-1AHG221 ECA-1AHG222 ECA-1AHG331 ECA-

1AHG332 ECA-1AHG471 ECA-1AHG472 ECA-1AHG682 ECA-1AHG101 ECA-1AHG102 ECA-1AHG103 ECA-

1EHG101 ECA-1HHG100 ECA-1HHG100B ECA-1HHG101 ECA-1HHG101B ECA-1HHG102 ECA-1HHG220 ECA-

1HHG220B ECA-1HHG221 ECA-1HHG221B ECA-1HHG222 ECA-1HHG2R2 ECA-1HHG330 ECA-1HHG330I

ECA-1HHG331 ECA-1HHG332 ECA-1HHG3R3 ECA-1HHG470 ECA-1HHG470B ECA-1HHG470I ECA-1JHG102

ECA-1JHG220 ECA-1JHG221 ECA-1JHG222 ECA-1JHG330 ECA-1JHG331 ECA-1JHG470 ECA-1JHG471 ECA-

2AHG330 ECA-2AHG331 ECA-2AHG3R3 ECA-2AHG470 ECA-2AHG471 ECA-2AHG471B ECA-2AHG4R7 ECA-

2DHG100 ECA-2DHG101 ECA-1CHG101 ECA-1CHG102 ECA-1CHG103 ECA-1CHG221 ECA-1CHG222 ECA-

1CHG331 ECA-1JHG100 ECA-1JHG101 ECA-2AHG100 ECA-2AHG101 ECA-2AHG102 ECA-2AHG220 ECA-

2AHG220B ECA-2AHG221 ECA-2AHG2R2 ECA-1EHG102 ECA-1EHG102B ECA-1EHG221 ECA-1EHG221B

ECA-1EHG222 ECA-1EHG222B ECA-1EHG331 ECA-1EHG332 ECA-1EHG470 ECA-1EHG470B ECA-1EHG471

ECA-1EHG471B ECA-1EHG472 ECA-1EHG682 ECA-1VHG221 ECA-1VHG221B ECA-1VHG222 ECA-1VHG330

ECA-1VHG331 ECA-1VHG332